Every revision of twsi after the A20 have a bug where we need to
write again the control register after each interrupts. We also need
to add some delay before writing to this register, a simple read of the
same register does the job so do that.
Also fix the case when we have finish sending all the bytes, it only worked
for 1 byte transfer (the same kind that we do for talking to the PMIC on A20
boards).
While here add more debug messages and rework some of them.
This was tested by talking to a AT23C32 eeprom and a DS3231 RTC from an
H3 and A20 board.
PR: 247576
Reported by: Manuel Stühn (freebsd@justmail.de)
MFC after: 1 week
On some boards there is a lot of of syscon node that are unused as
more specific drivers is probed before, no need to flood the console
for the mostly-unused generic ones.
MFC after: 1 week
geli does all of its crypto operations in a separate thread pool, so
g_eli_start, g_eli_read_done, and g_eli_write_done don't actually do very
much work. Enabling direct dispatch eliminates the g_up/g_down bottlenecks,
doubling IOPs on my system. This change does not affect the thread pool.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25587
This patch uses a slightly different algorithm for the non-ext_pgs case,
where a variable called "mcp" is maintained, pointing to the current
location that mbuf data can be filled into. This avoids use of
mtod(mp, char *) + mp->m_len to calculate the location, since this does
not work for ext_pgs mbufs and I think it makes the algorithm more readable.
This change should not result in semantic changes for the non-ext_pgs case.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
While testing with system default cc set to cubic, and
running a memory exhaustion validation, FreeBSD panics for a
missing inpcb reference / lock.
Reviewed by: rgrimes (mentor), tuexen (mentor)
Approved by: rgrimes (mentor), tuexen (mentor)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25583
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
We cannot complete the interrupt (i.e. write to the claims/complete register
until the interrupt handler has actually run. We don't run the interrupt
handler immediately from intr_isrc_dispatch(), we only schedule it for later
execution.
If we immediately complete it (i.e. before the interrupt handler proper has
run) the interrupt may be triggered again if the interrupt source remains set.
From RISC-V Instruction Set Manual: Volume II: Priviliged Architecture, 7.4
Interrupt Gateways:
"If a level-sensitive interrupt source deasserts the interrupt after the PLIC
core accepts the request and before the interrupt is serviced, the interrupt
request remains present in the IP bit of the PLIC core and will be serviced by
a handler, which will then have to determine that the interrupt device no
longer requires service."
In other words, we may receive interrupts twice.
Avoid that by postponing the completion until after the interrupt handler has
run.
If the interrupt is handled by a filter rather than by scheduling an interrupt
thread we must also complete the interrupt, so set up a post_filter handler
(which is the same as the post_ithread handler).
Reviewed by: mhorne
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25531
Now nhop_ref_object() unconditionally acquires a reference, and the new
nhop_try_ref_object() uses refcount_acquire_if_not_zero() to
conditionally acquire a reference. Since the former is cheaper, use it
when we know that the initial counter value is non-zero. No functional
change intended.
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D25535
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Looks good: emaste
Differential Revision: https://reviews.freebsd.org/D25135
These system calls already perform validation of their parameters when
called in capability mode, identical to cpuset_(get|set)affinity().
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
cpuset_(get|set)(affinity|domain)(2) permit a get or set of the calling
thread or process' CPU and domain set in capability mode, but only when
the thread or process ID is specified as -1. Extend this to cover the
case where the ID actually matches the caller's TID or PID, since some
code, such as our pthread_attr_get_np() implementation, always provides
an explicit ID.
It was not and still is not permitted to access CPU and domain sets for
other threads in the same process when the process is in capability
mode. This might change in the future.
Submitted by: Greg V <greg@unrelenting.technology> (original version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25552
Add a more compact display format for kern.tty_info_kstacks inspired by
procstat -kk. Set it as a default one.
# sysctl kern.tty_info_kstacks=1
kern.tty_info_kstacks: 0 -> 1
# sleep 2
^T
load: 0.17 cmd: sleep 623 [nanslp] 0.72r 0.00u 0.00s 0% 2124k
#0 0xffffffff80c4443e at mi_switch+0xbe
#1 0xffffffff80c98044 at sleepq_catch_signals+0x494
#2 0xffffffff80c982c2 at sleepq_timedwait_sig+0x12
#3 0xffffffff80c43af3 at _sleep+0x193
#4 0xffffffff80c50e31 at kern_clock_nanosleep+0x1a1
#5 0xffffffff80c5119b at sys_nanosleep+0x3b
#6 0xffffffff810ffc69 at amd64_syscall+0x119
#7 0xffffffff810d5520 at fast_syscall_common+0x101
sleep: about 1 second(s) left out of the original 2
^C
# sysctl kern.tty_info_kstacks=2
kern.tty_info_kstacks: 1 -> 2
# sleep 2
^T
load: 0.24 cmd: sleep 625 [nanslp] 0.81r 0.00u 0.00s 0% 2124k
mi_switch+0xbe sleepq_catch_signals+0x494 sleepq_timedwait_sig+0x12
sleep+0x193 kern_clock_nanosleep+0x1a1 sys_nanosleep+0x3b
amd64_syscall+0x119 fast_syscall_common+0x101
sleep: about 1 second(s) left out of the original 2
^C
Suggested by: avg
Reviewed by: mjg
Relnotes: yes
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25487
Otherwise the same checks are duplicated across four different system
call implementations, cpuset_(get|set)(affinity|domain)(). No
functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* Only read the DPCPU pointer once per xive_dispatch call.
* Optimize HE decoding for the common cases.
Reported by: jhibbits (in irc)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25545
- Get rid of the ifl_vm_addrs array. It is not used by any existing
consumer, so we are just dirtying a couple of cache lines for no
reason.
- Use uma_zalloc(fl->ifl_zone) instead of m_cljget(). Otherwise
m_cljget() is doing unnecessary work to look up the correct zone, when
iflib already knows what that zone is.
- ifl_gen is only used when INVARIANTS is on, so make that more clear.
- Fix some style nits and inconsistencies.
Reviewed by: gallatin
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25490
When refilling an rx freelist, make sure we only update the hardware
producer index if at least one cluster was allocated. Otherwise the
NIC is programmed to write a previously used cluster, typically
resulting in a use-after-free when packet data is written by the
hardware.
Also make sure that we don't update the fragment index cursor if the
last allocation attempt didn't succeed. For at least Intel drivers,
iflib assumes that the consumer index and fragment index cursor stay in
lockstep, but this assumption was violated in the face of cluster
allocation failures.
Reported and tested by: pho
Reviewed by: gallatin, hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25489
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
Currently the linking order of the infiniband, IB, modules decide in which
order the clients are attached and detached. For example one IB client may
use resources from another IB client. This can lead to a potential deadlock
at shutdown. For example if the ipoib is unregistered after the ib_multicast
client is detached, then if ipoib is using multicast addresses a deadlock may
happen, because ib_multicast will wait for all its resources to be freed before
returning from the remove method.
Fix this by using module_xxx_order() instead of module_xxx().
Differential Revision: https://reviews.freebsd.org/D23973
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also, add a new function nfsm_add_ext_pgs() which will either add a page
or add a new ext_pgs mbuf with a page to the mbuf list. Used by nfsm_strtom().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
On architectures that use RELA relocations it is safe to rerun the ifunc
resolvers on after all CPUs have started, but while they are sill parked.
On arm64 with big.LITTLE this is needed as some SoCs have shipped with
different ID register values the big and little clusters meaning we were
unable to rely on the register values from the boot CPU.
Add support for rerunning the resolvers on arm64 and amd64 as these are
both RELA using architectures.
Reviewed by: kib
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25455
it would fail with EINVAL, breaking some of the Python regression
tests.
While here, cap the user-controlled message length.
Note that the code doesn't seem to be copying out the new length
in either (success or failure) case. This will be addressed separately.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25392
create /sys/class/power_supply/. This silences some warnings
from biology/linux-foldingathome.
Reported by: 0mp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25557
TCGETS et al are frequently issued by Linux binaries while the previous code
avoidably ping-pongs a global sx lock and serializes on Giant.
Note that even with the fix the common case will serialize on a per-tty lock.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Like other types of allocation, fpu_kern_ctx are frequently allocated per-cpu.
Provide the API and sketch some example consumers.
fpu_kern_alloc_ctx_domain() preferentially allocates memory from the
provided domain, and falls back to other domains if that one is empty
(DOMAINSET_PREF(domain) policy).
Maybe it makes more sense to just shove one of these in the DPCPU area
sooner or later -- left for future work.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D22053
They trigger for some people, the bug is not obvious, there are no takers
for fixing it, the issue already had to be there for years beforehand and
is low priority.
- Ask the firmware for the number of frames that can be stuffed in one
work request.
- Modify mp_ring to increase the likelihood of tx coalescing when there
are just one or two threads that are doing most of the tx. Add teeth
to the abdication mechanism by pushing the consumer lock into mp_ring.
This reduces the likelihood that a consumer will get stuck with all
the work even though it is above its budget.
- Add support for coalesced tx WR to the VF driver. This, with the
changes above, results in a 7x improvement in the tx pps of the VF
driver for some common cases. The firmware vets the L2 headers
submitted by the VF driver and it's a big win if the checks are
performed for a batch of packets and not each one individually.
Reviewed by: jhb@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25454
