Commit Graph

428 Commits

Author SHA1 Message Date
John Baldwin
8a9bc9c03b - Use the new resource_disabled() helper function to see if devices are
disabled.
- Change the apm driver to match the acpi driver's behavior by checking to
  see if the device is disabled in the identify routine instead of in the
  probe routine.  This way if the device is disabled it is never created.

Note that a few places (ips(4), Alpha SMP) used "disable" instead of
"disabled" for their hint names, and these hints must be changed to
"disabled".  If this is a big problem, resource_disabled() can always be
changed to honor both names.
2003-07-02 16:09:02 +00:00
Scott Long
87947cad18 Track the resource id of the memory port instead of just assuming that
it is 0x0.  Cardbus-based sio/modem cards can now be ejected without
panic'ing.
2003-06-09 21:25:14 +00:00
Poul-Henning Kamp
0623afde6f Remove extra unused variable.
Found by:       FlexeLint
2003-05-31 18:39:29 +00:00
Murray Stokely
4001e1ee2e Add E-Tech ISA PnP modem ID.
PR:		kern/36692
Submitted by:	Theo van Klaveren <t.vanklaveren@student.utwente.nl>
Approved by:	re (murray)
MFC After:	3 days
2003-05-16 04:04:04 +00:00
David E. O'Brien
7aaa845578 Revert rev 1.396 -- it broke the Alpha kernel build. 2003-05-05 09:09:16 +00:00
Peter Wemm
8c027ecbba Eliminate a compiler warning with gcc3.3 on AMD64, where speed is
a 32 bit int which can never be > ULONG_MAX / 8.  Its an 'always true'
warning.
2003-04-30 21:39:28 +00:00
Mark Murray
51da11a27a Fix some easy, global, lint warnings. In most cases, this means
making some local variables static. In a couple of cases, this means
removing an unused variable.
2003-04-30 12:57:40 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Maxim Sobolev
2d95f7d4a9 Brucify.
Requested and reviewed by:	bde
MFC after:	2 weeks
2003-03-18 21:26:28 +00:00
Maxim Sobolev
71fbba351a Remove duplicate line introduced in the previous commit.
Submitted by:	bde
MFC after:	2 weeks
2003-03-15 18:49:41 +00:00
Maxim Sobolev
084254f807 - Add minimal support for TI16754 4xUART chip into sio(4) driver and remove
now unnecessary hack from the previous commit;
- Add support for Interrupt Latch Register (ILR) into puc(4). So far only
  ILRs compatible with specifications from Digi International are supported.
  Support for other types of ILRs could be easily added later;
- Correct clock frequency for IC Book Labs Dreadnought x16 Lite board;
- Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards.

Sponsored by:   IC Book Labs
MFC after:      2 weeks
2003-03-15 16:25:40 +00:00
Maxim Sobolev
a2a101e766 Add initial support for IC Book Labs Dreadnought x16 Pro 16-ports card. Since
this card is based on 16750 UART, modify sio(4) a bit to ignore 16750-specific
7th bit of MCR when probing card. This allows card to be detected and attached
as 16550A-compatible device. More work needs to be done in order to enable
nice 16750-specific features such as larger fifo buffer and higher speeds.

Sponsored by:	IC Book Labs
MFC after:	2 weeks
2003-03-12 17:20:24 +00:00
Takanori Watanabe
a009cc2a40 Add _HID of IrDA module and Pen tablet on
Tablet PC Acer Travel Mate C100.

Sponsored by: ACER ,Alpha Omega, MYCOM , Synnex
2003-03-11 16:49:06 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
c2b46fcca4 Add yet a patch for the patchwork quilt called sio(4):
Allow people set set flags on pci based SIO ports.
2003-02-27 14:09:36 +00:00
Poul-Henning Kamp
59c5c475f1 Typo, I must have hit xZZ in vi(1). 2003-02-27 12:53:21 +00:00
Poul-Henning Kamp
6cec1852d4 Make flags bit 0x10000 mean that PPS timestamping should use the
CTS instead of the DCD pin.
2003-02-27 12:27:09 +00:00
Poul-Henning Kamp
263444cfbf Change the console interface to pass a "struct consdev *" instead of a
dev_t to the method functions.

The dev_t can still be found at struct consdev *->cn_dev.

Add a void *cn_arg element to struct consdev which the drivers can use
for retrieving their softc.
2003-02-20 20:54:45 +00:00
Poul-Henning Kamp
029f0b69a4 Change "dev_t gdbdev" to "void *gdb_arg", some possible paths for GDB
will not have a dev_t.
2003-02-16 19:22:21 +00:00
Warner Losh
58f4eca2a6 Whatever dumbass wrote sio_pci.c didn't include a detach method.
Wearing said pointy hat, correct the oversight and hope nobody
notices.

# this should make xircom modems happier to detach once other bugs with
# the cardbus layer are fixed.

Noticed by: scottl
Conical Hat to: imp
2003-02-16 18:05:54 +00:00
Warner Losh
3c2eeec09a No need to wrap siodetach() with sio_pccard_detach. 2003-02-16 18:03:15 +00:00
Poul-Henning Kamp
f341ca9891 Remove #include <sys/dkstat.h> 2003-02-16 14:13:23 +00:00
Poul-Henning Kamp
6607b68526 Set si_drv1 to our softc for all the six dev_t's we create for a serial port. 2003-02-02 21:25:22 +00:00
Poul-Henning Kamp
1b1cf40164 Add PCI id for Quatech SSCLP-200/300 lowprofile single-port RS422/485 card. 2003-01-31 21:11:20 +00:00
Warner Losh
d36644f2d9 Be nice. There are evidentally a number of different cards that
identify themselves as serial cards that it would be desirable to
attach a different driver than sio to.  Since we are claiming all
serial cards, this is not possible.  Instead, return -100 to indicate
that we're willing to take the card, but still allow other drivers to
attach.

Pointed out by: Maksim Yevmenkin
2002-12-21 22:37:54 +00:00
John Baldwin
7399a5ddd0 Make 'rclk' a uintptr_t to quiet warnings. 2002-11-07 22:22:10 +00:00
Warner Losh
41a0c1eedd s/modunload/kldunload 2002-10-11 20:22:20 +00:00
Poul-Henning Kamp
37c841831f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
Poul-Henning Kamp
97c6f4f976 Add yet a quick flag to sio: 0x100000 "Scratch pad register missing".
The advanced stage of computer assisted hardware design and
verification is aptly illustrated by the fact that this is necessary
because only the first ports in a single-chip, dual-port async
PC-Card product lacks this register.
2002-09-27 22:00:23 +00:00
Yoshihiro Takahashi
9601a29654 Move the com_emr register definition to sioreg.h. 2002-09-24 02:35:57 +00:00
Poul-Henning Kamp
c8423e9702 Move the com_scr register address definition over with the other seven.
Approved by:	bde
2002-09-22 08:51:31 +00:00
Poul-Henning Kamp
ca603e16f2 Don't probe the interrupt on puc(4) attached devices. 2002-09-03 11:17:38 +00:00
Poul-Henning Kamp
de7ac779e9 Only try to flush the FIFO of 500 characters, return EIO if that fails.
This at least prevents the total hang of the machine when I open a
PCCARD sio device on -current, but it does not solve the problem.
2002-08-28 22:25:41 +00:00
Thomas Moestl
60a6cf4eff Add missing quotes around ID string in __FBSDID().
Pointy hat to:	obrien
2002-07-16 16:20:44 +00:00
Maxim Sobolev
8c6d67ef99 Add PCI ID and configuration hint for Netmos Nm9845 PCI 6-ports serial
card.

Submitted by:	Oleg Antoshin <oleh@at2000.kiev.ua>
MFC after:	3 days
2002-07-10 17:26:11 +00:00
Peter Wemm
160554fbf4 Remove a couple of __P() stragglers. 2002-06-29 02:32:34 +00:00
Nick Hibma
befd9c61ce set siocnunit to the correct value. This fixes the freeze on boot for
alphas.

Submitted by:		 Bernd Walter <ticso@cicely5.cicely.de>
2002-06-23 18:57:53 +00:00
Nick Hibma
8fbfe5e927 Make this compile on Alpha. 2002-06-22 16:33:29 +00:00
Nick Hibma
d8dbc77c56 Make the speed used by gdb over serial settable in the kernel configuration.
This facilitates the use in circumstances where you are using a serial
console as well. GDB doesn't support anything higher than 9600 baud (19k2
if you are lucky), but the console does.
2002-06-18 21:30:37 +00:00
David E. O'Brien
b22bb3c911 ebus sio(4) attachment.
Submitted by:	tmm
2002-06-18 01:19:31 +00:00
David Malone
a37231dc3f Add another Askey ISA modem ID.
PR:		35813
Submitted by:	Chris Knight <chris@aims.com.au>
2002-05-06 09:02:55 +00:00
Poul-Henning Kamp
7bf758bff0 Simplify the RFC2783 and PPS_SYNC timestamp collection API. 2002-04-26 20:24:28 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Bruce Evans
8fdb202d85 Support more than 32 sio unit numbers. The maximum unit number is now
(65536 * 32 - 1), but MAKEDEV only supports up to (32 * 32 -1).  Device
names use the unit number in base 32 for all "digits".

This required fixing an old bug in MAKEDEV:ttyminor().  Its arg was the
global $unit instead of $1.

Reminded by:	Valentin K. Ponomarenko <valka@krog.ukrtel.net>
MFC-after:	1 week
2002-03-31 09:15:43 +00:00
Bruce Evans
e968c4ef3c Hacks for measuring interrupt latency. Interrupt latency can be
measured accurately for periodic interrupts provided the interrupts
don't need to be serviced very quickly to keep their period almost
constant.  sio output interrupts have this property (interrupt service
can be delayed for up to 1 character time without the period changing).

This is non-optional and undocumented so that it can be added and
removed easily.  It has no significant effect unless it is enabled by
hacking on a variable using a debugger.  Hardclock and statclock interrupts
would work even better for this, at least on i386's, provided their
interrupt handlers are fast (as they are in -current but not in -stable
or in my version of -current).
2002-03-31 06:49:38 +00:00
Mike Barcroft
e48fdcb37b Include <machine/limits.h> for definition of ULONG_MAX. 2002-03-25 09:21:45 +00:00
Bruce Evans
359052dbcc Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-23 12:13:34 +00:00
John Baldwin
565f27f116 Add PCI ID for the SeaLevel Ultra 530.PCI single port card.
Sponsored by:	The Weather Channel
2002-03-20 19:38:26 +00:00