is set to 0, it now has the same affect as setting witness_dead used to
have.
- Added a sysctl handler that allows root to change witness_watch from a
non-zero value to zero to disable witness at runtime. Note that you
can't turn witness back on once it is off. You can only turn it off as
a one-way switch.
- Added a comment describing the possible values of witness_watch.
a parameter instead of using the level of a given witness. When
recursing, pass an indent level of indent + 1.
- Make use of the information witness_levelall() provides in
witness_display_list() to use an O(n) algorithm instead of an O(n^2)
algo to decide which witnesses to display hierarchies from. Basically,
we only display a hierarchy for witnesses with a level of 0.
- Add a new per-witness flag that is reset at the start of
witness_display() for all witness's and is set the first time a witness
is displayed in witness_displaydescendants(). If a witness is
encountered more than once in the lock order tree (which happens often),
witness_displaydescendants() marks the later occurrences with the string
"(already displayed)" and doesn't display the subtree under that
witness. This avoids duplicating large amounts of the lock order tree
in the 'show witness' output in DDB.
All these changes serve to make 'show witness' a lot more readable and
useful than it was previously.
adds a witness to the child list of a parent witness. rebalancetree()
runs through the entire tree removing direct descendants of witnesses
who already have said child witness as an indirect descendant through
another direct descendant. itismychild() now calls insertchild()
followed by rebalancetree() and no longer needs the evil hack of
having static recursed variable.
- Add a function reparentchildren() that adds all the direct descendants
of one witness as direct descendants of another witness.
- Change the return value of itismychild() and similar functions so that
they return 0 in the case of failure due to lack of resources instead
of 1. This makes the return value more intuitive.
- Check the return value of itismychild() when defining the static lock
order in witness_initialize().
- Don't try to setup a lock instance in witness_lock() if itismychild()
fails. Witness is hosed anyways so no need to do any more witness
related activity at that point. It also makes the code flow easier to
understand.
- Add a new depart() function as the opposite of enroll(). When the
reference count of a witness drops to 0 in witness_destroy(), this
function is called on that witness. First, it runs through the
lock order tree using reparentchildren() to reparent direct descendants
of the departing witness to each of the witness' parents in the tree.
Next, it releases it's own child list and other associated resources.
Finally it calls rebalanacetree() to rebalance the lock order tree.
- Sort function prototypes into something closer to alphabetical order.
As a result of these changes, there should no longer be 'dead' witnesses
in the order tree, and repeatedly loading and unloading a module should no
longer exhaust witness of its internal resources.
Inspired by: gallatin
recursing on a lock instead of before. This fixes a bug where WITNESS
could get a little confused if you did an sx_tryslock() on a sx lock that
you already had an slock on. WITNESS would still function correctly but
it could result in weirdness in the output of 'show locks'. This also
makes it possible for mtx_trylock() to recurse on a lock.
ddb 'show locks' command. Thus, move witness_list() to the #ifdef DDB
section and remove extra checks for calling this function outside of
DDB. Also, witness_list() now returns void instead of returning an int.
Reported by: Steve Ames <steve@energistic.com>
Prodded by: davidxu
witness. Sleepable locks such as sx locks always come before all mutexes
including Giant. However, the static lock order list placed Giant before
the proctree and allproc sx locks. This resulted in witness creating a
cycle in its lock order "tree" (real trees don't have cycles) leading to
infinite recursion and eventually a double fault. To fix, put Giant after
sx locks in the lock order list.
- Add a comment about special lock order rules and Giant near the top of
subr_witness.c. Specifically, this documents and explains the real lock
order relationship between Giant and sleepable locks (i.e. lockmgr locks
and sx locks). Basically, Giant can be safely acquired either before or
after sleepable locks and the case of Giant before a sleepable lock is
exempted as a special case.
- Add a new static function 'witness_list_lock()' that displays a single
line of information about a struct lock_instance. This is used to
make the output of witness messages more consistent and reduce some code
duplication.
- Fixup a few comments in witness_lock().
- Properly handle the Giant-before-sleepable-lock lock order exception in
a more general fashion and remove the no longer needed LI_SLEPT flag.
- Break up the last condition before assuming a reversal a bit to try
and make the logic less confusing in witness_lock().
- Axe WITNESS_SLEEP() now that LI_SLEPT is no longer needed and replace it
with a more general WITNESS_WARN() macro/function combination.
WITNESS_WARN() allows you to output a customized message out to the
console along with a list of held locks. It will optionally drop into
the debugger as well. You can exempt a single lock from the check by
passing it in as the second argument. You can also use flags to specify
if Giant should be exempt from the check, if all sleepable locks should
be exempt from the check, and if witness should panic if any non-exempt
locks are found.
- Make the witness_list() function static. Other areas of the kernel
should use the new WITNESS_WARN() instead.
#if'ed out for a while. Complete the deed and tidy up some other bits.
We need to be able to call this stuff from outer edges of interrupt
handlers for devices that have the ISR bits in pci config space. Making
the bios code mpsafe was just too hairy. We had also stubbed it out some
time ago due to there simply being too much brokenness in too many systems.
This adds a leaf lock so that it is safe to use pci_read_config() and
pci_write_config() from interrupt handlers. We still will use pcibios
to do interrupt routing if there is no acpi.. [yes, I tested this]
Briefly glanced at by: imp
I'm not convinced there is anything major wrong with the patch but
them's the rules..
I am using my "David's mentor" hat to revert this as he's
offline for a while.
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.
A thread owns an upcall can collect all completed syscall contexts in
its ksegrp, turn itself into UPCALL mode, and takes those contexts back
to userland. Any thread without upcall structure has to export their
contexts and exit at user boundary.
Any thread running in user mode owns an upcall structure, when it enters
kernel, if the kse mailbox's current thread pointer is not NULL, then
when the thread is blocked in kernel, a new UPCALL thread is created and
the upcall structure is transfered to the new UPCALL thread. if the kse
mailbox's current thread pointer is NULL, then when a thread is blocked
in kernel, no UPCALL thread will be created.
Each upcall always has an owner thread. Userland can remove an upcall by
calling kse_exit, when all upcalls in ksegrp are removed, the group is
atomatically shutdown. An upcall owner thread also exits when process is
in exiting state. when an owner thread exits, the upcall it owns is also
removed.
KSE is a pure scheduler entity. it represents a virtual cpu. when a thread
is running, it always has a KSE associated with it. scheduler is free to
assign a KSE to thread according thread priority, if thread priority is changed,
KSE can be moved from one thread to another.
When a ksegrp is created, there is always N KSEs created in the group. the
N is the number of physical cpu in the current system. This makes it is
possible that even an userland UTS is single CPU safe, threads in kernel still
can execute on different cpu in parallel. Userland calls kse_create to add more
upcall structures into ksegrp to increase concurrent in userland itself, kernel
is not restricted by number of upcalls userland provides.
The code hasn't been tested under SMP by author due to lack of hardware.
Reviewed by: julian
earlier acquired lock with the same witness as the lock currently being
acquired. If we had released several earlier acquired locks after
acquiring enough locks to require another lock_list_entry bucket in the
lock list, then subsequent lock_list_entry buckets could contain only one
lock instance in which case i would be zero.
Reported by: Joel M. Baldwin <qumqats@outel.org>
- Get the initial mode from the prom settings and don't clobber the mode
on open.
- Copy output into an internal ring buffer instead of accessing the tty
outq directly in the interrupt handler. This fixes a problem where
garbage would show up in the output stream.
- Reset the console port completely and reprogram all the parameters
before enabling it. This fixes seemingly random hangs on startup
when using a fast interrupt handler.
- Add minimal locking in place of spls.
- Remove dead code and minor cleanups.
- It actually works this time, honest!
- Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive,
so try and optimize things where possible.
- Introduce ranged shootdowns that can be done as a single IPI.
- PG_G support for i386
- Specific-cpu targeted shootdowns. For example, there is no sense in
globally purging the TLB cache for where we are stealing a page from
the local unshared process on the local cpu. Use pm_active to track
this.
- Add some instrumentation for the tlb shootdown code.
- Rip out SMP code from <machine/cpufunc.h>
- Try and fix some very bogus PG_G and PG_PS interactions that were bad
enough to cause vm86 bios calls to break. vm86 depended on our existing
bugs and this was the cause of the VESA panics last time.
- Fix the silly one-line error that caused the 'panic: bad pte' last time.
- Fix a couple of other silly one-line errors that should have caused more
pain than they did.
Some more work is needed:
- pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we
have a hook in cpu_switch.
- The IPI handlers need some cleanup. I have a bogus %ds load that can
be avoided.
- APTD handling is rather bogus and appears to be a large source of
global TLB IPI shootdowns for no really good reason.
I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop.
I expect to see a bigger difference when there is significant pageout
activity or the system otherwise has memory shortages.
I have backed out a few optimizations that I had been using over the last
few days in order to be a little more conservative. I'll revisit these
again over the next few days as the dust settles.
New option: DISABLE_PG_G - In case I missed something.
queue lock (revision 1.33 of vm/vm_page.c removed them).
o Make the free queue lock a spin lock because it's sometimes acquired
inside of a critical section.
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)
Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)
NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..
lock_object by another pointer (though all of lock_object should be
conditional on LOCK_DEBUG anyways) in exchange for an O(1) TAILQ_REMOVE()
in witness_destroy() (called for every mtx_destroy() and sx_destroy())
instead of an O(n) STAILQ_REMOVE. Since WITNESS is so dog slow as it is,
the speed-up is worth the space cost.
Suggested by: iedowse
being created and destroyed without a single long-term one around to ensure
the witness associated with that group of locks stays alive. The pipe
mutexes are an example of this group. For a dead witness we no longer
clear the witness name. Instead, when looking up the witness for a lock,
if a dead witness' (a witness with a refcount of 0) w_name pointer is
identical to the witness name of the lock then we revive that witness
instead of using a new witness for the lock. This results in far fewer
dead witness objects and also better preserves locking orders over the long
term resulting in more correct lock order checking. Note that we can't
ever derefence w_name of a dead witness since we don't know if the string
it is pointing to has been free()'d or kldunload()'d out from under us.
yet. We just return without performing any checks.
- Don't explicitly enter and exit critical sections when walking lock
lists. We don't need a critical section to walk the list of sleep
locks for a thread. We check to see if a spin lock list is empty
before we walk it. If the list is empty we don't need to walk it. If
it isn't then we already hold at least one spin lock and are already in
a critical section and thus don't need our own explicit critical
section.
be done internally.
Ensure that no one can fsetown() to a dying process/pgrp. We need
to check the process for P_WEXIT to see if it's exiting. Process
groups are already safe because there is no such thing as a pgrp
zombie, therefore the proctree lock completely protects the pgrp
from having sigio structures associated with it after it runs
funsetownlst.
Add sigio lock to witness list under proctree and allproc, but over
proc and pgrp.
Seigo Tanimura helped with this.
sx lock. Trying to get the lock order between these locks was getting
too complicated as the locking in wait1() was being fixed.
- leavepgrp() now requires an exclusive lock of proctree_lock to be held
when it is called.
- fixjobc() no longer gets a shared lock of proctree_lock now that it
requires an xlock be held by the caller.
- Locking notes in sys/proc.h are adjusted to note that everything that
used to be protected by the pgrpsess_lock is now protected by the
proctree_lock.
point to a more generic name for a lock that is more suitable for use by
witness when grouping locks. For example, although network driver locks
use the interface name for the name of each lock, they should all use the
same witness and be treated the same as witness. Another example is that
all UMA zone locks should be treated the same. The witness code has also
been updated to print out the lock type in addition to the lock name in a
few places where it is relevant.
with this flag. Remove the dup_list and dup_ok code from subr_witness. Now
we just check for the flag instead of doing string compares.
Also, switch the process lock, process group lock, and uma per cpu locks over
to this interface. The original mechanism did not work well for uma because
per cpu lock names are unique to each zone.
Approved by: jhb
simply need to prevent switching from another CPU and do not need
interrupts disabled.
- Add a comment to witness_list() about why displaying spin locks for
threads on other CPU's really is just a bad idea and probably shouldn't
be done.
There is some unresolved badness that has been eluding me, particularly
affecting uniprocessor kernels. Turning off PG_G helped (which is a bad
sign) but didn't solve it entirely. Userland programs still crashed.
