Commit Graph

1006 Commits

Author SHA1 Message Date
Jordan K. Hubbard
0942673f33 Adjust ex0 entries properly after talking with Javier. 1997-01-17 14:19:04 +00:00
Bruce Evans
6bed7e5140 Guard against the i8254 timer being uninitialzed if DELAY() is
called early for console i/o.  The timer is usually in BIOS mode
if it isn't explicitly initialized.  Then it counts twice as fast
and has a max count of 65535 instead of 11932.  The larger count
tended to cause infinite loops for delays of > 20 us.  Such delays
are rare.  For syscons and kbdio, DELAY() is only called early
enough to matter for ddb input after booting with -d, and the delay
is too small to matter (and too small to be correct) except in the
PC98 case.  For pcvt, DELAY() is not used for small delays (pcvt
uses its own broken routine instead of the standard broken one),
but some versions call DELAY() with a large arg when they unnecessarily
initialize the keyboard for doing console output.  The problem is
more serious for pcvt because there is always some early console
output.

Guard against the i8254 timer being partially or incorrectly
initialized.  This would have prevented the endless loop.

Should be in 2.2.
1997-01-16 18:28:20 +00:00
Jordan K. Hubbard
3b20426160 Add the ex driver (Intel EtherExpress Pro/10).
I have no idea if this works since I don't have one of the cards to test.
I also don't know what the LINT and GENERIC entries should look like,
so I just made up some values for now and left them commented out.
Someone who knows the factory settings for a Pro/10, please contact me!

Submitted-By: Javier Martín Rueda <jmrueda@diatel.upm.es>
1997-01-16 12:19:21 +00:00
Bruce Evans
7d350e7256 Fixed printing of small offsets. E.g., -4(%ebp) is now printed
as -0x4(%ebp) instead of as _APTD+0xffc(%ebp), and if GUPROF is
defined, 8(%ebp) is now printed as 0x8(%ebp) instead of as
GMON_PROF_HIRES+0x4(%ebp).
1997-01-16 11:27:11 +00:00
David Greenman
649c409d03 Fix bug related to map entry allocations where a sleep might be attempted
when allocating memory for network buffers at interrupt time. This is due
to inadequate checking for the new mcl_map. Fixed by merging mb_map and
mcl_map into a single mb_map.

Reviewed by:	wollman
1997-01-15 20:46:02 +00:00
Bruce Evans
e0611bb287 Fixed longstanding annoying warning about a type mismatch. pmap doesn't
really uses pt_entry_t internally, so don't use it here.

Fixed range checking for writing.  The partial page (if any) following
etext wasn't writable.
1997-01-15 19:24:12 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
John Dyson
b447ce90f5 When we changed pmap_protect to support adding the writeable
attribute to a page range, we forgot to set the PG_WRITEABLE
flag in the vm_page_t.  This fixes that problem.
1997-01-11 23:50:42 +00:00
Nate Williams
796c9a39d8 Moved pccard_configure() to the end of the configure() list. This
avoids problems with the PCIC controller grabbing an interrupt that
another card needs.

Closes PR: kernel/2405

Reviewed by:	bde
1997-01-11 17:41:36 +00:00
John Dyson
9b5a5d81be Prepare better for multi-platform by eliminating another required
pmap routine (pmap_is_referenced.)  Upper level recoded to use
pmap_ts_referenced.
1997-01-11 07:19:02 +00:00
KATO Takenori
af4342c037 Staticize the functions rtc_inb, rtc_outb, rtc_serialcombit, and
rtc_serialcom.  These functions are only used by PC98.
1997-01-10 17:11:09 +00:00
Nate Williams
62ce633d36 Make the code more consistant by using the INTR*MASK macros througout the
code.

Reviewed by:	bde

[
Bruce suggest removing the macros completely, but I'm not up to that
task quite yet.
]
1997-01-08 16:12:56 +00:00
Nate Williams
7323d74ac0 Changed magic # 0xa0000 -> ISA_HOLE_START since it's now defined. 1997-01-08 05:56:55 +00:00
Bruce Evans
639cfb9f88 Reenabled i586_optimized_copyin/out yet again. 1997-01-04 13:57:17 +00:00
Bruce Evans
363e4cc182 Fixed context switching of FPU state after a fault in
i586_optimized_copyin/out.
1997-01-04 13:56:18 +00:00
Bruce Evans
ab372207b2 Fixed botched tables:
- the operands for bt, bts, arpl and `enter' were reversed.
- btr was reported as bts (with the correct operand order).
- cmpxchg was misplaced.  It was misplaced differently in the
  comments.  It is misplaced differently again in the i486 manual.
  I put it where the i586 manual and gas say it is.
- fucompp was misplaced.
- the rr table for(s) some versions of fstp, fcom and fcomp was non-null.
  This caused some invalid opcodes to be reported as "" instead of as
  "<bad instruction>".
- the word and long versions of the fi* instructions were reversed.
- aaa and daa were reversed.

Fixed bugs involving unusual operand sizes:
- 32-bit registers weren't always forced for bswap or for moves to and
  from special registers.
- the operand sizes weren't reported for [l]call or [l]jmp.
- displacements weren't truncated mod 2^16 when the operand size was
  16-bit.
- too-large displacements and offsets were fetched, and too-large
  offsets were reported, when the operand size was 16-bit.
- sign extended immediate bytes were extended too far when the operand
  size was 16-bit.

Fixed bugs involving usual operand sizes:
- 8-bit source registers weren't forced for mov[sz]b[wl].
- 16-bit source registers weren't forced for mov[sz]w[wl].
- immediate bytes were sometimes reported as sign extended even for
  byte operations.  Same for immediate words in word operations.
- the immediate byte was not reported as sign extended for `push'.

Finished Pentium support:
- cpuid, cmpxchg8b and rsm were missing.

Finished i287 support:
- fneni, fndisi and fsetpm were missing.  These are harmless nops on
  later FPUs.

Improvements:
- report invalid opcodes 0xd6 and 0xf1 using .byte.  They are special
  in not causing invalid operand exceptions when executed.
- report the immediate byte for unusual aam and aad instuctions.
  Immediate bytes other than 0x0a always worked and are documented to
  work on Pentiums.
1997-01-04 13:47:30 +00:00
Stefan Eßer
8c39a12760 Add code to copy the LDT, if required.
This code was sent to me by Bruce Evans, and seems to fix some
possible kernel panic in case of an execution error. It did not
cause any problems on my system, but I did never observe the
problem this patch is supposed to fix, anyway.

This patch is a NOP, unless the kernel is built with "options
USER_LDT", and doesn't affect the GENERIC kernel for this reason.

I want to have it in 2.2: it fixes a bug ...

Submitted by:	bde
1997-01-02 01:43:09 +00:00
John Dyson
d0aea04fe0 Let the VM system know that on certain arch's that VM_PROT_READ
also implies VM_PROT_EXEC.  We support it that way for now,
since the break system call by default gives VM_PROT_ALL.  Now
we have a better chance of coalesing map entries when mixing
mmap/break type operations.  This was contributing to excessive
numbers of map entries on the modula-3 runtime system.  The
problem is still not "solved", but the situation makes more
sense.

Eventually, when we work on architectures where VM_PROT_READ
is orthogonal to VM_PROT_EXEC, we will have to visit this
issue carefully (esp. regarding security issues.)
1996-12-30 05:31:21 +00:00
John Dyson
5e0c727879 Superficial clean-up of useracc calls. (The useracc usage of
B_READ/B_WRITE is bogus anyway.)  Might as well make the call prettier
anyway.
1996-12-29 02:29:41 +00:00
John Dyson
f486bc1d64 Allow pmap_protect to increase permissions. This mod can eliminate
the need for unnecessary vm_faults.
Submitted by:	Alan Cox <alc@cs.rice.edu>
1996-12-29 02:27:07 +00:00
Bruce Evans
5a9c69e7af Disabled i586-optimized copyin and copyout again. The fault handler
is still broken - it doesn't restore the floating point state.

2.2-BETA users should disable it using npx0 flags 0x04 the same as
2.2-ALPHA users should have.
1996-12-28 12:19:25 +00:00
Poul-Henning Kamp
544d046f79 Give MFS_ROOT priority over NFS as root filesystem.
2.2 candidate.
1996-12-21 16:43:35 +00:00
Stefan Eßer
56ecc3824a Mention amd driver in comment regarding PCI drivers. 1996-12-21 02:09:04 +00:00
Bruce Evans
959c02787e Only handle copyin/out/etc faults when not in an interrupt handler.
This makes unexpected faults (in an interrupt handler) more likely
to crash properly.  It could be done even better (more robustly and
more efficiently) using lazy fault handling.
1996-12-18 19:12:01 +00:00
Bruce Evans
115abf2097 Fixed formatting of KERN_DUMPDEV.
Should be in 2.2.
1996-12-18 18:53:00 +00:00
Bruce Evans
db7e362115 Moved the printing of the BIOS geometries from cpu_startup() into
configure() where it always belonged.  It was originally slightly
misplaced after configure().  Rev.138 left it completely misplaced
before the DEVFS, DRIVERS and CONFIGURE sysinits by not moving it
together with configure().

Restored the printing of bootinfo.bi_n_bios_used now that it can
be nonzero.
1996-12-18 15:03:10 +00:00
Stefan Eßer
f8fc022510 Add driver for AMD 53c974 SCSI (Tekram DC390/390T).
Remove MAX_LUN=2 option for NCR driver: FAILSAFE does
no longer imply MAX_LUN=1.
1996-12-18 01:30:19 +00:00
David Greenman
fee444b87b Fix nbuf calculation /4 -> /8. 2.2 already has it this way.
Reviewed by:	dyson
1996-12-17 04:19:41 +00:00
Stefan Eßer
b88a895923 Remove "options MAXLUN=2" since the ncr driver will probe for 8 LUNs
now anyway, even if compiled with FAILSAFE defined.
1996-12-15 16:31:18 +00:00
Jordan K. Hubbard
c40e48ec21 Make the USERCONFIG_BOOT semantics closer to what was original
intended.
1996-12-14 22:18:43 +00:00
Jordan K. Hubbard
0b3870cb60 Close PR#2198:
I've added an installation from optical disk drive facility.
	This enables FreeBSD to be installed from an optical disk, which
	may be formatted in "super floppy" style or sliced into MSDOS-FS
	and UFS partitions.

	Note:  ncr.c should be reviewed by Stefan Esser <se@freebsd.org>
	and cd.c by Joerg Wunsch <joerg@freebsd.org> before bringing this
	into 2.2.

Submitted-By: Shunsuke Akiyama <akiyama@kme.mei.co.jp>
1996-12-13 07:55:14 +00:00
Steven Wallace
8bb9c4c7ea Soften range-check for LDTs.
Reviewed by:	bde
1996-12-12 17:57:50 +00:00
David Greenman
a7e4f840ca Fix allocation for exech_map to be 16*PAGE_SIZE rather than 32*PAGE_SIZE
so that it is scaled the same as exec_map (16 concurrent exec'ers).
1996-12-12 04:20:50 +00:00
John Dyson
ab608804ed One minor mod to set the limit of nbufs to 2048 from 1536. More important
fix to exech_map, it used 32*ARG_MAX, and it should use 32*PAGE_SIZE.
1996-12-11 05:52:15 +00:00
John Dyson
3596818baa Clean-up of the new buffer kva allocation code. Also, there was an
error in the !BOUNCE_BUFFERS case.
1996-12-05 04:28:52 +00:00
Bruce Evans
4eb73cdaff Removed all references to b_cylinder (aka b_cylin). It was evil and
hasn't been used for a year or two since disksort() started sorting
on b_pblkno.
1996-12-01 16:34:41 +00:00
John Dyson
621d520e2f Fix a problem with the new buffer_map management code. Additionally,
decrease the size of buffer_map to approx 2/3 of what it used to be
(buffer_map can be smaller now.)  The original commit of these changes
increased the size of buffer_map to the point where the system would
not boot on large systems -- now large systems with large caches will
have even less problems than before.
1996-12-01 15:46:40 +00:00
Bruce Evans
4cea724a81 Reenabled i586-optimized copyin/out.
Should be in 2.2.  Don't put it there for a while.
1996-11-30 14:08:44 +00:00
Bruce Evans
9dde46b7a0 Fixed EFAULT handling in i586_copyin() and i586_copyout(). Use a
consistent stack frame in fastmove() so that only one new fault handler
is necessary.

Should be in 2.2.  Harmless until the i586 versions are reenabled.
1996-11-29 14:32:30 +00:00
Bruce Evans
c827accd9a Don't print bootinfo.bi_n_bios_used in cpu_startup() since it is always
zero because no drivers have had a chance to change it.
1996-11-29 13:19:26 +00:00
Bruce Evans
388ddab632 Don't clobber the SIGCONT bit in the signal mask in sigreturn(). Use
the `sigcantmask' macro to get the correct set of unmaskable signals.

Found by: NIST-PCTS.
1996-11-29 13:12:14 +00:00
Poul-Henning Kamp
07c48e4bb0 Make a kernel with DDB but without sio possible again. This is only
a stopgap measure, a more complete solution is on somebodys whiteboard
(and we all know that THAT means :-).

Reviewed by:	pst
1996-11-25 18:39:25 +00:00
John Dyson
9970cd3721 Improve the caching of small files like directories, while not
substantially increasing buffer space.  Specifically, we double
the number of buffers, but allocate only half the amount of memory
per buffer.  Note that VDIR files aren't cached unless instantiated
in a buffer.  This will significantly improve caching.
1996-11-17 02:11:01 +00:00
Justin T. Gibbs
11b5ea7239 Since there have been so many reports of the Memory Mapped I/O to the
aic7xxx cards failing on certain motherboards, reverse the logic used to
control this feature.  AHC_FORCE_PIO is replaced with AHC_ALLOW_MEMIO.
GENERIC no longer needs to specify the AHC_FORCE_PIO option since this is
the default.
1996-11-16 01:09:20 +00:00
Bruce Evans
f020427513 Disabled i586-optimized copyin and copyout. They usually panic if the
user supplies a bad address, because they push a lot of stuff that the
fault handler doesn't know about onto the stack.  This has been broken
for more than half a year despite being tested for almost half a year
in -current.
1996-11-15 20:27:14 +00:00
Jordan K. Hubbard
e1d2ff9f44 Change this back to movl for -current since it seems to work there.
Bruce says that movl is broken in -stable, which would certainly explain
why this didn't work there.
1996-11-15 09:00:56 +00:00
Jordan K. Hubbard
6de3a3bb17 movl instruction should have been lea (this is why userconfig didn't
work in 2.1).

Spotted-by-the-keen-eyes-of: Don Lewis <Don.Lewis@tsc.tdk.com>
1996-11-14 15:55:21 +00:00
Bruce Evans
a8c33fd1e8 Removed another #include of opt_temporary.h.
YA2.2C.
1996-11-12 14:54:16 +00:00
Bruce Evans
3c10da63aa Removed #include of "opt_temporary.h". All the temporary options went
away, so this header is no longer generated.

This change should be in 2.2.  The old version shouldn;t have been in
2.2 (blush).
1996-11-12 13:36:52 +00:00
Bruce Evans
1fe048505d Replaced I586_OPTIMIZED_BCOPY and I586_OPTIMIZED_BZERO with boot-time
negative-logic flags (flags 0x01 and 0x02 for npx0, defaulting to unset = on).
This changes the default from off to on.  The options have been in current
for several months with no problems reported.

Added a boot-time negative-logic flag for the old I5886_FAST_BCOPY option
which went away too soon (flag 0x04 for npx0, defaulting to unset = on).

Added a boot-time way to set the memory size (iosiz in config, iosize in
userconfig for npx0).

LINT:
Removed old options.  Documented npx0's flags and iosiz.

options.i386:
Removed old options.

identcpu.c:
Don't set the function pointers here.  Setting them has to be delayed
until after userconfig has had a chance to disable them and until after
a good npx0 has been detected.

machdep.c:
Use npx0's iosize instead of MAXMEM if it is nonzero.

support.s:
Added vectors and glue code for copyin() and copyout().
Fixed ifdefs for i586_bzero().
Added ifdefs for i586_bcopy().

npx.c:
Set the function pointers here.
Clear hw_float when an npx exists but is too broken to use.
Restored style from a year or three ago in npxattach().
1996-11-11 20:39:03 +00:00