down, even if there are hung processes and the mount is non-
interruptible.
This works by having nfs_unmount call a new function nfs_nmcancelreqs()
in the FORCECLOSE case. It scans the list of outstanding requests
and marks as interrupted any requests belonging to the specified
mount. Then it waits up to 30 seconds for all requests to terminate.
A few other changes are necessary to support this:
- Unconditionally set a socket timeout so that even hard mounts
are guaranteed to occasionally check the R_SOFTTERM flag on
requests. For hard mounts this flag can only be set by
nfs_nmcancelreqs().
- Reject requests on a mount that is currently being unmounted.
- Never grant the receive lock to a request that has been cancelled.
This should also avoid an old problem where a forced NFS unmount
could cause a crash; it occurred when a VOP on an unlocked vnode
(usually VOP_GETATTR) was in progress at the time of the forced
unmount.
commit by Kirk also fixed a softupdates bug that could easily be triggered
by server side NFS.
* An edge case with shared R+W mmap()'s and truncate whereby
the system would inappropriately clear the dirty bits on
still-dirty data. (applicable to all filesystems)
THIS FIX TEMPORARILY DISABLED PENDING FURTHER TESTING.
see vm/vm_page.c line 1641
* The straddle case for VM pages and buffer cache buffers when
truncating. (applicable to NFS client side)
* Possible SMP database corruption due to vm_pager_unmap_page()
not clearing the TLB for the other cpu's. (applicable to NFS
client side but could effect all filesystems). Note: not
considered serious since the corruption occurs beyond the file
EOF.
* When flusing a dirty buffer due to B_CACHE getting cleared,
we were accidently setting B_CACHE again (that is, bwrite() sets
B_CACHE), when we really want it to stay clear after the write
is complete. This resulted in a corrupt buffer. (applicable
to all filesystems but probably only triggered by NFS)
* We have to call vtruncbuf() when ftruncate()ing to remove
any buffer cache buffers. This is still tentitive, I may
be able to remove it due to the second bug fix. (applicable
to NFS client side)
* vnode_pager_setsize() race against nfs_vinvalbuf()... we have
to set n_size before calling nfs_vinvalbuf or the NFS code
may recursively vnode_pager_setsize() to the original value
before the truncate. This is what was causing the user mmap
bus faults in the nfs tester program. (applicable to NFS
client side)
* Fix to softupdates (see ufs/ffs/ffs_inode.c 1.73, commit made
by Kirk).
Testing program written by: Avadis Tevanian, Jr.
Testing program supplied by: jkh / Apple (see Dec2001 posting to freebsd-hackers with Subject 'NFS: How to make FreeBS fall on its face in one easy step')
MFC after: 1 week
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
Make the name cache hash as well as the nfsnode hash use it.
As a special tweak, create an unsigned version of register_t. This allows
us to use a special tweak for the 64 bit versions that significantly
speeds up the i386 version (ie: int64 XOR int64 is slower than int64
XOR int32).
The code layout is a little strange for the string function, but I was
able to get between 5 to 10% improvement over the original version I
started with. The layout affects gcc code generation choices and this way
was fastest on x86 and alpha.
Note that 'CPUTYPE=p3' etc makes a fair difference to this. It is
around 45% faster with -march=pentiumpro on a p6 cpu.
actually in the kernel. This structure is a different size than
what is currently in -CURRENT, but should hopefully be the last time
any application breakage is caused there. As soon as any major
inconveniences are removed, the definition of the in-kernel struct
ucred should be conditionalized upon defined(_KERNEL).
This also changes struct export_args to remove dependency on the
constantly-changing struct ucred, as well as limiting the bounds
of the size fields to the correct size. This means: a) mountd and
friends won't break all the time, b) mountd and friends won't crash
the kernel all the time if they don't know what they're doing wrt
actual struct export_args layout.
Reviewed by: bde
mail:
The problem seems to originate with NFS's postop_attr
information that is returned with a read or write RPC.
Within a vm_fault context, the code cannot deal with
vnode_pager_setsize() shrinking a vnode.
The workaround in the patch below stops the nfsm_postop_attr()
macro from ever shrinking a vnode. If the new size in the
postop_attr information is smaller, then it just sets the
nfsnode n_attrstamp to 0 to stop the wrong size getting
used in the future. This change only affects postop_attr
attributes; the nfsm_loadattr() macro works as normal.
The change is implemented by adding a new argument to
nfs_loadattrcache() called 'dontshrink'. When this is
non-zero, nfs_loadattrcache() will never reduce the
vnode/nfsnode size; instead it zeros n_attrstamp.
There remain other was processes can get stuck in vmopar.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: dillon
Tested by: Vadim Belman <voland@lflat.org>
there is nothing we can do about it. In fact, after further review
there simply are not very many instances of the two structures NFS
checks for 'bloat' so I've decided to simply rip the checks out entirely.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
-----------------------------
The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.
The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.
struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.
signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.
Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.
NOTE: kdump (and port linux_kdump) must be recompiled.
Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.
previously issued synchronously even if async daemons (nfsiod's) were
available. The commit has been moved from the strategy code to the doio
code in order to asynchronize it.
Removed use of lastr in preparation for removal of vnode->v_lastr. It
has been replaced with seqcount, which is already supported by the system
and, in fact, gives us a better heuristic for sequential detection then
lastr ever did.
Made major performance improvements to the server side commit. The
server previously fsync'd the entire file for each commit rpc. The
server now bawrite()s only those buffers related to the offset/size
specified in the commit rpc.
Note that we do not commit the meta-data yet. This works still needs
to be done.
Note that a further optimization can be done (and has not yet been done)
on the client: we can merge multiple potential commit rpc's into a
single rpc with a greater file offset/size range and greatly reduce
rpc traffic.
Reviewed by: Alan Cox <alc@cs.rice.edu>, David Greenman <dg@root.com>
piecemeal, middle-of-file writes for NFS. These hacks have caused no
end of trouble, especially when combined with mmap(). I've removed
them. Instead, NFS will issue a read-before-write to fully
instantiate the struct buf containing the write. NFS does, however,
optimize piecemeal appends to files. For most common file operations,
you will not notice the difference. The sole remaining fragment in
the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache
coherency issues with read-merge-write style operations. NFS also
optimizes the write-covers-entire-buffer case by avoiding the
read-before-write. There is quite a bit of room for further
optimization in these areas.
The VM system marks pages fully-valid (AKA vm_page_t->valid =
VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This
is not correct operation. The vm_pager_get_pages() code is now
responsible for marking VM pages all-valid. A number of VM helper
routines have been added to aid in zeroing-out the invalid portions of
a VM page prior to the page being marked all-valid. This operation is
necessary to properly support mmap(). The zeroing occurs most often
when dealing with file-EOF situations. Several bugs have been fixed
in the NFS subsystem, including bits handling file and directory EOF
situations and buf->b_flags consistancy issues relating to clearing
B_ERROR & B_INVAL, and handling B_DONE.
getblk() and allocbuf() have been rewritten. B_CACHE operation is now
formally defined in comments and more straightforward in
implementation. B_CACHE for VMIO buffers is based on the validity of
the backing store. B_CACHE for non-VMIO buffers is based simply on
whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear,
and vise-versa). biodone() is now responsible for setting B_CACHE
when a successful read completes. B_CACHE is also set when a bdwrite()
is initiated and when a bwrite() is initiated. VFS VOP_BWRITE
routines (there are only two - nfs_bwrite() and bwrite()) are now
expected to set B_CACHE. This means that bowrite() and bawrite() also
set B_CACHE indirectly.
There are a number of places in the code which were previously using
buf->b_bufsize (which is DEV_BSIZE aligned) when they should have
been using buf->b_bcount. These have been fixed. getblk() now clears
B_DONE on return because the rest of the system is so bad about
dealing with B_DONE.
Major fixes to NFS/TCP have been made. A server-side bug could cause
requests to be lost by the server due to nfs_realign() overwriting
other rpc's in the same TCP mbuf chain. The server's kernel must be
recompiled to get the benefit of the fixes.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
routine was [ab]used for two different things, and you couldn't tell from
the wait channel which one had wedged.
Catch a few things missing from NFS_NOSERVER.
detachment of vfs sysctls. Unloading of vfs LKMs doesn't actually
work for any vfs, since it leaves garbage pointers to memory
allocation control structures.
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
NFS_*TIMO should possibly be converted to sysctl vars (jkh's suggestion),
but in some cases it looks like nfs keeps a copy of the value in a struct
hash sizes are already ifdef'd KERNEL, so there aren't userland inpact
from them...
NFS_MINATTRTIMO VREG attrib cache timeout in sec
NFS_MAXATTRTIMO
NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec
NFS_MAXDIRATTRTIMO
NFS_GATHERDELAY Default write gather delay (msec)
NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this
NFS_WDELAYHASHSIZ and with this
NFS_MUIDHASHSIZ Tune the size of nfsmount with this
NFS_NOSERVER (already documented in LINT)
NFS_DEBUG turn on NFS debugging
also, because NFS_ROOT is used by very different files, it has been
renamed to opt_nfsroot.h instead of the old opt_nfs.h....
of this part of commits is to minimize unnecessary differences between
the other NFS's of similar origin. Yes, there are gratuitous changes here
that the style folks won't like, but it makes the catch-up less difficult.
for better packing. This means that we can choose better values for the
various hash entries without having to try and get it all to fit within
an artificial power of two limit for malloc's sake.
We had run out of bits in the nfs mount flags, I have moved the internal
state flags into a seperate variable. These are no longer visible via
statfs(), but I don't know of anything that looks at them.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
to give pollution compatible with <nfs/nqfs.h>. At least mount_nfs.c
previously had to #define KERNEL before including <nfs/nfs.h> to get
this pollution, but this gave other pollution.
Moved comment about NFSINT_SIGMASK to immediately before the code that
it applies to.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully
can be tidied up later by a slight redesign.
PR: kern/2573, kern/2754, kern/3046 (possibly)
Reviewed by: dyson
Use the same value of 512 (ufs actually uses DEV_BSIZE). There are
too many versions of DIRBLKSIZ, one for ufs, one for ext2fs, one for
nfs, one for ibcs2, one for linux, one for applications, ... I think
nfs's DIRBLKSIZ needs to be a divisor of the directory blocks sizes
of all supported file systems. There is also NFS_DIRBLKSIZ, which is
different from nfs's DIRBLKSIZ but is sometimes confused with it in
comments.
Removed a bogus #ifdef KERNEL that hid the tunable constants for nfs.
This came in undocumented with the Lite2 merge although it isn't in
Lite2. It required more-bogus #define KERNEL's in fstat and pstat
to make the constants visible.
Restored a spelling fix from rev.1.17.
Removed duplicate #defines of all the the NFS mount option flags.
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
existing mechanism uses a global queue for some buffers and the
vp->b_dirtyblkhd queue for others. This turns sequential writes into
randomly ordered writes to the server, affecting both read and write
performance. The existing mechanism also copes badly with hung
servers, tending to block accesses to other servers when all the iods
are waiting for a hung server.
The new mechanism uses a queue for each mount point. All asynchronous
i/o goes through this queue which preserves the ordering of requests.
A simple mechanism ensures that the iods are shared out fairly between
active mount points. This removes the sysctl variable vfs.nfs.dwrite
since the new queueing mechanism removes the old delayed write code
completely.
This should go into the 2.2 branch.
The interface into the "VMIO" system has changed to be more consistant
and robust. Essentially, it is now no longer necessary to call vn_open
to get merged VM/Buffer cache operation, and exceptional conditions
such as merged operation of VBLK devices is simpler and more correct.
This code corrects a potentially large set of problems including the
problems with ktrace output and loaded systems, file create/deletes,
etc.
Most of the changes to NFS are cosmetic and name changes, eliminating
a layer of subroutine calls. The direct calls to vput/vrele have
been re-instituted for better cross platform compatibility.
Reviewed by: davidg
