This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
No functional change - only moved lines, changed whitespace, and
updated comments.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28001
There is no reason this driver can't return default probe value.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: emaste, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26869
Replace various hw reg bit set/clear helpers with a universal
`qoriq_gpio_set` function.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26868
Make the code more conformant to style(9) and improve the general
readability.
This patch does not alter the driver logic.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26867
Later dtb from the RPI Foundation removed the brcm,genet-v5 compatible
for some unknown reason, add brcm,bcm2711-genet-v5 to the list of compatible
device for if_genet
- Add I2S and CODEC clocks to CRU driver
- Add support for gate selection to frac clock
- Add setfreq support to mux clock
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D27831
These macros generate both the 32- and 64-bit ops, but the mask was hard
coded for 32-bit ops, causing the 64-bit ops always to affect only the
low 32 bits.
PR: 252324
Reported by: gbe, mmel
Reviewed by: markj, mmel
Tested by: mmel, rwatson
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27886
Use the kernel physical base rather than the ttbr0 base when building
the kernel identity map. The latter is correct with current assumptions
but may not always be the case.
Sponsored by: Innovate UK
The adr instruction allows for an address of +-1M from the instruction.
If we replace these with an adrp and an add instruction we can generate
an address +-4G. The adrp will get an address of the 4k page the label
is within, and the add uses the :lo12: prefix to add just the low bits
to this address.
This will allow us to move things around with fewer issues than if we
needed to keep them within the +-1MB range.
Sponsored by: Innovate UK
This sysctl node can generate very verbose output, so don't trigger it
for sysctl -a or sysctl vm.pmap.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D27504
One of the disadvantages of our current busdma code is the fact that
we process the bounced buffer in a page-by-page manner. This means that
the short (subpage) buffer allocated across page boundaries is bounced
to 2 separate pages.
This suboptimal behavior is consistent across all platforms and can be
related to (probably unimplementable or incompatible with bouncing)
BUS_DMA_KEEP_PG_OFFSET flag.
Therefore, allocate one additional page to be fully comply with this
requirement.
Discused with: markj
PR: 251018
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
Some older PSCI implementations corrupt (or do not pass) the context_id
argument to newly started secondary cores. Although the ideal solution to this
problem is u-boot update, we can find the correct value for the argument (cpuid)
by comparing of real core mpidr register with the value stored in pcu->mpidr.
MFC after: 2 weeks
The definition was copied from amd64, but the layout of the struct
differs slightly between these platforms. This fixes spurious
`unsupported sigaction flag 0xXXXXXXXX` messages when executing some
Linux binaries on arm64.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27460
This same check is used on other architectures. Previously this would
permit a stack frame to unwind into any arbitrary kernel address
(including unmapped addresses).
Reviewed by: andrew, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27362
We assume the boot CPU is always CPU 0 on arm64. To allow for this reserve
cpuid 0 for the boot CPU in the ACPI and FDT cases but otherwise start the
CPU as normal. We then check for the boot CPU in start_cpu and return as if
it was started.
While here extract the FDT CPU init code into a new function to simplify
cpu_mp_start and return FALSE from start_cpu when the CPU fails to start.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27497
- record MPIDR for all started cores in pcpu, they will be used as link
between physical locality of given core, ID in external description
(FDT or ACPI) and cupid.
- because of above, cpuid can (and should) be freely assigned, only boot
CPU must have cpuid 0. Simplify startup code according this.
Please note that pure cpuid is not sufficient instrument to hold any
information about core or cluster topology, nor to determistically iterate
over subpart of cores in CPU (iterate over all cores in single cluster for
example). Situation is more complicated by fact that PSCI can reject start
of core without reporting error (because power budget for example), or by
fact that is possible that we booted on non-first core in cluster (thus with
cpuid 0 assigned to random core).
Given cores topology should be exhibited to other parts of system
(for example to scheduler for big.little or multicluster systems) by using
smp_topo interface.
Differential Revision: https://reviews.freebsd.org/D13863
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
On some of the server-grade ARM64 machines the number of NUMA domains is higher
than 2. When booting GENERIC kernel on such machines the SRAT parser fails
leaving the system with a single domain. To make GENERIC kernel usable on those
server, match the parameter value with the one for amd64 arch.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D27368
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Since EDK2 commit d8e36289cef7bde628b023219cd65fa8e8d4562a, the Graphical console may
completely hide SPCR, causing panics later when locating timers.
As such simply rely on the ACPI Root pointer presence.
Submitted by: dan.kotowski@a9development.com
Reviewed by: andrew, mw
Differential Revision: https://reviews.freebsd.org/D27306
When there is no ACPI redistributor sub-table in the MADT we need to
fall back to use the GICR base address from the GIC CPU interface
structure.
Handle this fallback when adding memory to the device and when counting
the number of redistributors.
PR: 251171
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27247
The former tries to dereference memory allocated by the latter. If counting
the redistributor fails it may try to dereference memory that was never
allocated.
Sponsored by: Innovate UK
The same driver works on both, allow the driver to attach to a GICv4
controller with the ACPI attachment.
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
This adds an arm64 iommu interface and a driver for Arm System Memory
Management Unit version 3.2 (ARM SMMU v3.2) specified in ARM IHI 0070C
document.
Hardware overview is provided in the header of smmu.c file.
The support is disabled by default. To enable add 'options IOMMU' to your
kernel configuration file.
The support was developed on Arm Neoverse N1 System Development Platform
(ARM N1SDP), kindly provided by ARM Ltd.
Currently, PCI-based devices and ACPI platforms are supported only.
The support was tested on IOMMU-enabled Marvell SATA controller,
Realtek Ethernet controller and a TI xHCI USB controller with a low to
medium load only.
Many thanks to Konstantin Belousov for help forming the generic IOMMU
framework that is vital for this project; to Andrew Turner for adding
IOMMU support to MSI interrupt code; to Mark Johnston for help with SMMU
page management; to John Baldwin for explaining various IOMMU bits.
Reviewed by: mmel
Relnotes: yes
Sponsored by: DARPA / AFRL
Sponsored by: Innovate UK (Digital Security by Design programme)
Differential Revision: https://reviews.freebsd.org/D24618
