This test attempts to use \t (tab intended) in a grep expression. With the
former /usr/bin/grep (i.e. gnugrep), this was interpreted as a literal 't'.
The expression would work anyways because the tr(1) usage would ultimately
replace all of the spaces with a single newline, and they would match the
paths whether they were correctly fromatted or not.
Current /usr/bin/grep (i.e. bsdgrep) is less-tolerant of ordinary-escapes, a
property of the underlying regex(3) engine, to make it easier to identify
when stuff like this happens. In-fact, this expression broke after the
switch happened.
This revision does the bare basics to fix the usage by using a printf to get
a literal tab character to insert into the expression. It also swaps out the
manual insertion of the line prefix into the grep expression by pulling
that part out of $sep and reusing it for the leading path.
The secondary issue was the tr(1) usage, since tr would only replace the
first character of string1 with the first character of string2. This has
instead been replaced by a sed expression, which similary understands \n to
be a newline on all supported versions of FreeBSD. Each path now gets
prefixed with the appropriate context that should be there (i.e. numeric
sequence followed by a tab).
PR: 252446
Reviewed by: emaste, ngie
Differential Revision: https://reviews.freebsd.org/D27983
This was overlooked in the pfi_kkif/pfi_kif splitup and as a result
userspace could no longer tell which interfaces had the skip flag
applied.
MFC after: 2 weeks
Doing a 'dd' over iscsi will reliably cause stalls. Tx
cleaning _should_ reliably happen as data is sent.
However, currently if the transmit queue fills it will
wait until the iflib timer (hz/2) runs.
This change causes the the tx taskq thread to be run
if there are completed descriptors.
While here:
- make timer interrupt delay a sysctl
- simplify txd_db_check handling
- comment on INTR types
Background on the change:
Initially doorbell updates were minimized by only writing to the register
on every fourth packet. If txq_drain would return without writing to the
doorbell it scheduled a callout on the next tick to do the doorbell write
to ensure that the write otherwise happened "soon". At that time a sysctl
was added for users to avoid the potential added latency by simply writing
to the doorbell register on every packet. This worked perfectly well for
e1000 and ixgbe ... and appeared to work well on ixl. However, as it
turned out there was a race to this approach that would lockup the ixl MAC.
It was possible for a lower producer index to be written after a higher one.
On e1000 and ixgbe this was harmless - on ixl it was fatal. My initial
response was to add a lock around doorbell writes - fixing the problem but
adding an unacceptable amount of lock contention.
The next iteration was to use transmit interrupts to drive delayed doorbell
writes. If there were no packets in the queue all doorbell writes would be
immediate as the queue started to fill up we could delay doorbell writes
further and further. At the start of drain if we've cleaned any packets we
know we've moved the state machine along and we write the doorbell (an
obvious missing optimization was to skip that doorbell write if db_pending
is zero). This change required that tx interrupts be scheduled periodically
as opposed to just when the hardware txq was full. However, that just leads
to our next problem.
Initially dedicated msix vectors were used for both tx and rx. However, it
was often possible to use up all available vectors before we set up all the
queues we wanted. By having rx and tx share a vector for a given queue we
could halve the number of vectors used by a given configuration. The problem
here is that with this change only e1000 passed the necessary value to have
the fast interrupt drive tx when appropriate.
Reported by: mav@
Tested by: mav@
Reviewed by: gallatin@
MFC after: 1 month
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D27683
vn_rdwr() must lock the entire file range for IO_APPEND
just like vn_io_fault() does for O_APPEND.
Reviewed by: kib, imp, mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28008
Only ACPI attachment is supported for now, some others depend on the
presence of smbios(4) support, which we lack on arm64.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28009
A straightforward(ish) port from aesni(4). This implementation does not
perform loop unrolling on the input blocks, so this is left as a future
performance improvement.
Submitted by: Greg V <greg AT unrelenting.technology>
Looks good: jhb, jmg
Tested by: mhorne
Differential Revision: https://reviews.freebsd.org/D21017
In the conversion into a tunable, we converted the
size of the s/g list used by the driver to be based
off of a hardcoded size of 128k rather than maxphys,
this caused performance problems for us. Revert this
to use the maxphys tunable.
Note that this constant is used to size dynamically allocated
things, and not static data structs, so this is safe.
Reviewed By: imp, kib, mav
Tested By:i dhw
Differential Revision: https://reviews.freebsd.org/D28023
Sponsored by: Netflix
No functional change - only moved lines, changed whitespace, and
updated comments.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28001
Code changes in this commit were obtained from straight from OpenBSD's
uplcom.c with almost no modification, the list of chip names and USB
IDs was obtained from Linux.
Differential Revision: https://reviews.freebsd.org/D27952
Submitted by: tomli_tomli.me (Yifeng Li)
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The macOS /bin/sh complains about using return outside of functions.
Replace `return 0` with `exit 0` to fix this. While editing this files
I've also fixed all the shellcheck warnings that were displayed by my IDE.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D28016
If we set STRIPBIN, we also have to set XSTRIPBIN since we otherwise
use the host /usr/bin/strip during buildworld. However, this does not
work on macOS since /usr/bin/strip doesn't handle ELF binaries.
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
I got annoyed by the number of warnings that the CheriBSD build was
emitting. It turns out that we are emitting lots of warnings during
bootstrap because bootstrap tools are built with the default compiler
flags and ignore the warnings flags that are set in bsd.sys.mk.
Looking at git blame, it appears that MK_WARNS=no has been passed since
rS112869, replacing the -DNO_WERROR option that was added in rS87775.
This commit changes MK_WARNS=no back to -DNO_WERROR. We need to pass
-DNO_WERROR, since the system compiler might have new warnings that we
don't know about yet, and we shouldn't fail the build in that case.
Reviewed By: imp, brooks
Differential Revision: https://reviews.freebsd.org/D27598
With this change and D27598 make kernel-toolchain no longer emits any
warnings for me.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D27599
Using a shell for loop means we have to spawn a separate install(1)
process for each header that is symlinked. This patch uses printf(1) to
generate an argument list that has been prefixed with the correct number
of ../ and then uses a single install(1) invocation.
This reduces the number of execve() calls during make includes from 2442
(with D27622) to 1382. Running `make symlinks` in include/ now spawns 214
processes instead of 1276 without this patch.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D27723
Having this as part of the bootstrap tools is useful to build disk images
to boot in QEMU (especially when building on a Linux/macOS host where
mkimg is not available). We have been bootstrapping mkimg in CheriBSD for
a long time (using LOCAL_XTOOL_DIRS) but I believe this is also useful
upstream.
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D27602
This makes the minimum amount of changes to allow inclusion of dtrace.h
without all the solaris compatibility headers. Installing dtrace.h allows
compiling consumers of libdtrace (e.g. https://github.com/tmetsch/python-dtrace)
without requiring a copy of the source tree.
For python-dtrace I worked around this in 58019c9a12
but being able to build the library without installed sources would be
extremely useful.
Reviewed By: gnn
Differential Revision: https://reviews.freebsd.org/D27884
Support for NS_MOREFRAG is broken, as NS_MOREFRAG is copied from
the TX slot to the RX slot rather than the other way around.
Also, the NS_MOREFRAG must be copied also in case of packet
copy (no zerocopy).
Reported by: rajesh1.kumar_amd.com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27980
We've created a new pf_ruleset.c file for pfctl and no longer use the
kernel vrsion, but the build system doesn't handle this dependency
change correctly. Delete the dependency file if it contains the kernel
version of the file.
MFC after: 2 weeks
There is no reason this driver can't return default probe value.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: emaste, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26869
Replace various hw reg bit set/clear helpers with a universal
`qoriq_gpio_set` function.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26868
Make the code more conformant to style(9) and improve the general
readability.
This patch does not alter the driver logic.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26867
hw.vga.textmode is directing VT VGA backend to use text mode.
The default screen mode for BIOS loader is text, and default
screen mode for VT VGA backend is graphics (unless we are running on
hypervisor or hw.vga.textmode is set to 1). Using hw.vga.textmode
for loader does remove possibility to have graphical mode VT VGA with
text mode loader.
screen.textmode can have possible values "0" to disable text mode,
and "1" to set text mode.
Rework the arguments handling around using getopt_long:
* add long option support
* add -4 and -6 support to enforce ipv4 or ipv6
While here fix a regression which occured between FreeBSD 12.1 and
FreeBSD 12.2 where pkg bootstrap -y stopped working
PR: 252270
MFC after: 2 weeks
Submitted by: evilham <contact@evilham.com>
Differential Revision: https://reviews.freebsd.org/D27860
Instead of trying to set reasonable register values, save significant
register values, then prepare for font upload and then restore
registers from saved data.
This seems to fix text mode for most cases where text mode breakage
was reported.
