(TOCONS | TOLOG) mask even when called from DDB points.
That breaks several output, where the most notable is textdump output.
Fix this by having configurable callbacks passed to witness_list_locks()
and witness_display_spinlock() for printing out datas.
Reported by: several broken textdump outputs
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC after: 7 days
X-MFC: r207922
In the case of the thread being on a sleepqueue or a turnstile, the
sched_lock was acquired (without the aid of the td_lock interface) and
the td_lock was dropped. This was going to break locking rules on other
threads willing to access to the thread (via the td_lock interface) and
modify his flags (allowed as long as the container lock was different
by the one used in sched_switch).
In order to prevent this situation, while sched_lock is acquired there
the td_lock gets blocked. [0]
- Merge the ULE's internal function thread_block_switch() into the global
thread_lock_block() and make the former semantic as the default for
thread_lock_block(). This means that thread_lock_block() will not
disable interrupts when called (and consequently thread_unlock_block()
will not re-enabled them when called). This should be done manually
when necessary.
Note, however, that ULE's thread_unblock_switch() is not reaped
because it does reflect a difference in semantic due in ULE (the
td_lock may not be necessarilly still blocked_lock when calling this).
While asymmetric, it does describe a remarkable difference in semantic
that is good to keep in mind.
[0] Reported by: Kohji Okuno
<okuno dot kohji at jp dot panasonic dot com>
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC: 2 weeks
a pointer-fetching specific operation check. Consequently, rename the
operation ASSERT_ATOMIC_LOAD_PTR().
* Fix the implementation of ASSERT_ATOMIC_LOAD_PTR() by checking
directly alignment on the word boundry, for all the given specific
architectures. That's a bit too strict for some common case, but it
assures safety.
* Add a comment explaining the scope of the macro
* Add a new stub in the lockmgr specific implementation
Tested by: marcel (initial version), marius
Reviewed by: rwatson, jhb (comment specific review)
Approved by: re (kib)
Check that the given variable is at most uintptr_t in size and that
it is aligned.
Note: ASSERT_ATOMIC_LOAD() uses ALIGN() to check for adequate
alignment -- however, the function of ALIGN() is to guarantee
alignment, and therefore may lead to stronger alignment
enforcement than necessary for types that are smaller than
sizeof(uintptr_t).
Add checks to mtx, rw and sx locks init functions to detect possible
breakage. This was used during debugging of the problem fixed with
r196118 where a pointer was on an un-aligned address in the dpcpu area.
In collaboration with: rwatson
Reviewed by: rwatson
Approved by: re (kib)
adds probes for mutexes, reader/writer and shared/exclusive locks to
gather contention statistics and other locking information for
dtrace scripts, the lockstat(1M) command and other potential
consumers.
Reviewed by: attilio jhb jb
Approved by: gnn (mentor)
of spurious witness warnings since lockmgr grew witness support. Before
this, every time you passed an interlock to a lockmgr lock WITNESS treated
it as a LOR.
Reviewed by: attilio
the ABI when enabled. There is no longer an embedded lock_profile_object
in each lock. Instead a list of lock_profile_objects is kept per-thread
for each lock it may own. The cnt_hold statistic is now always 0 to
facilitate this.
- Support shared locking by tracking individual lock instances and
statistics in the per-thread per-instance lock_profile_object.
- Make the lock profiling hash table a per-cpu singly linked list with a
per-cpu static lock_prof allocator. This removes the need for an array
of spinlocks and reduces cache contention between cores.
- Use a seperate hash for spinlocks and other locks so that only a
critical_enter() is required and not a spinlock_enter() to modify the
per-cpu tables.
- Count time spent spinning in the lock statistics.
- Remove the LOCK_PROFILE_SHARED option as it is always supported now.
- Specifically drop and release the scheduler locks in both schedulers
since we track owners now.
In collaboration with: Kip Macy
Sponsored by: Nokia
Currently, Giant is not too much contented so that it is ok to treact it
like any other mutexes.
Please don't forget to update your own custom config kernel files.
Approved by: cognet, marcel (maintainers of arches where option is
not enabled at the moment)
currently, before to spin the turnstile spinlock is acquired and the
waiters flag is set.
This is not strictly necessary, so just spin before to acquire the
spinlock and to set the flags.
This will simplify a lot other functions too, as now we have the waiters
flag set only if there are actually waiters.
This should make wakeup/sleeping couplet faster under intensive mutex
workload.
This also fixes a bug in rw_try_upgrade() in the adaptive case, where
turnstile_lookup() will recurse on the ts_lock lock that will never be
really released [1].
[1] Reported by: jeff with Nokia help
Tested by: pho, kris (earlier, bugged version of rwlock part)
Discussed with: jhb [2], jeff
MFC after: 1 week
[2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
an unified way for all the lock primitives to express lock assertions.
Currenty, lockmgrs and rmlocks don't have assertions, so just panic in
that case.
This will be a base for more callout improvements.
Ok'ed by: jhb, jeff
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
new code and third party modules which try to depend on it.
- Initialize sched_lock in sched_4bsd.c.
- Declare sched_lock in sparc64 pmap.c and assert that we're compiling
with SCHED_4BSD to prevent accidental crashes from running ULE. This
is the sole remaining file outside of the scheduler that uses the
global sched_lock.
Approved by: re
- Add a per-turnstile spinlock to solve potential priority propagation
deadlocks that are possible with thread_lock().
- The turnstile lock order is defined as the exact opposite of the
lock order used with the sleep locks they represent. This allows us
to walk in reverse order in priority_propagate and this is the only
place we wish to multiply acquire turnstile locks.
- Use the turnstile_chain lock to protect assigning mutexes to turnstiles.
- Change the turnstile interface to pass back turnstile pointers to the
consumers. This allows us to reduce some locking and makes it easier
to cancel turnstile assignment while the turnstile chain lock is held.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
These functions are intended to be used to drop a lock and then reacquire
it when doing an sleep such as msleep(9). Both functions accept a
'struct lock_object *' as their first parameter. The 'lc_unlock' function
returns an integer that is then passed as the second paramter to the
subsequent 'lc_lock' function. This can be used to communicate state.
For example, sx locks and rwlocks use this to indicate if the lock was
share/read locked vs exclusive/write locked.
Currently, spin mutexes and lockmgr locks do not provide working lc_lock
and lc_unlock functions.
and optimize away unused stack values. The 48 bytes that the lock_profile_object
adds to the stack evidently has a measurable performance impact on certain workloads.
- Fix missing initialization in kern_rwlock.c causing bogus times to be collected
- Move updates to the lock hash to after the lock is released for spin mutexes,
sleep mutexes, and sx locks
- Add new kernel build option LOCK_PROFILE_FAST - only update lock profiling
statistics when an acquisition is contended. This reduces the overhead of
LOCK_PROFILING to increasing system time by 20%-25% which on
"make -j8 kernel-toolchain" on a dual woodcrest is unmeasurable in terms
of wall-clock time. Contrast this to enabling lock profiling without
LOCK_PROFILE_FAST and I see a 5x-6x slowdown in wall-clock time.
- only collect timestamps when a lock is contested - this reduces the overhead
of collecting profiles from 20x to 5x
- remove unused function from subr_lock.c
- generalize cnt_hold and cnt_lock statistics to be kept for all locks
- NOTE: rwlock profiling generates invalid statistics (and most likely always has)
someone familiar with that should review
- add cnt_hold cnt_lock support for spin mutexes
- make sure contested is initialized to zero to only bump contested when appropriate
- move initialization function to kern_mutex.c to avoid cyclic dependency between
mutex.h and lock_profile.h
wait (time waited to acquire) and hold times for *all* kernel locks. If
the architecture has a system synchronized TSC, the profiling code will
use that - thereby minimizing profiling overhead. Large chunks of profiling
code have been moved out of line, the overhead measured on the T1 for when
it is compiled in but not enabled is < 1%.
Approved by: scottl (standing in for mentor rwatson)
Reviewed by: des and jhb
panic, go ahead and do the longer DELAY(1) spin wait.
- If we panic due to spinning too long, print out a few more details
including the pointer to the mutex in question and the tid of the owning
thread.
a count of all non-spin locks, not just lockmgr locks. This can give us a
much cheaper way to see if we have any locks held (such as when returning
to userland via userret()) without requiring WITNESS.
MFC after: 1 week
all other mtx_lock() operations to block. Previously, when the mutex was
destroyed, it would still have a valid value in mtx_lock(): either the
unowned cookie, which would allow a subsequent mtx_lock() to succeed, or a
pointer to the thread who destroyed the mutex if the mutex was locked when
it was destroyed.
MFC after: 3 days
non-intuitive for the ~ to be built into the mask. All the users now
explicitly ~ the mask. In addition, add MTX_UNOWNED to the mask even
though it technically isn't a flag. This should unbreak mtx_owner().
Quickly spotted by: kris
