Commit Graph

20 Commits

Author SHA1 Message Date
Andrey V. Elsukov
d8caf56e9e Add ipfw_nat64 module that implements stateless and stateful NAT64.
The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
 1. Create lookup tables:
 # ipfw table T46 create type addr valtype ipv6
 # ipfw table T64 create type addr valtype ipv4
 2. Fill T46 and T64 tables.
 3. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 4. Create NAT64 instance:
 # ipfw nat64stl NAT create table4 T46 table6 T64
 5. Add rules that matches the traffic:
 # ipfw add nat64stl NAT ip from any to table(T46)
 # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
 1. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 2. Create NAT64 instance:
 # ipfw nat64lsn NAT create prefix4 A.B.C.D/28
 3. Add rules that matches the traffic:
 # ipfw add nat64lsn NAT ip from any to A.B.C.D/28
 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Obtained from:	Yandex LLC
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
Andrey V. Elsukov
b867e84e95 Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.

Reviewed by:	hrs
Obtained from:	Yandex LLC
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6420
2016-07-18 19:46:31 +00:00
Alexander V. Chernikov
358b9d09ed * Move "talist" and "iflist" cmds into newly-create "internal" ipfw(8) cmd.
* Add "table X detail" cmd and show detailed algo info there instead
  of "info".
2014-08-03 16:22:14 +00:00
Alexander V. Chernikov
9d099b4f38 * Dump available table algorithms via "ipfw talist" cmd.
Kernel changes:
* Add type/refcount fields to table algo instances.
* Add IP_FW_TABLES_ALIST opcode to export available algorihms to userland.

Userland changes:
* Fix cores on empty input inside "ipfw table" handler.
* Add "ipfw talist" cmd to print availabled kernel algorithms.
* Change "table info" output to reflect long algorithm config lines.
2014-07-29 22:44:26 +00:00
Alexander V. Chernikov
68394ec88e * Add generic ipfw interface tracking API
* Rewrite interface tables to use interface indexes

Kernel changes:
* Add generic interface tracking API:
 - ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
  state & bumps ref)
 - ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
  update ifindex)
 - ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
 - ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.

* Rewrite interface tables to use iface tracking API. Currently tables are
  implemented the following way:
  runtime data is stored as sorted array of {ifidx, val} for existing interfaces
  full data is stored inside namedobj instance (chained hashed table).

* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces

* Pass @chain ptr to most non-locked algorithm callbacks:
  (prepare_add, prepare_del, flush_entry ..). This may be needed for better
  interaction of given algorithm an other ipfw subsystems

* Add optional "change_ti" algorithm handler to permit updating of
  cached table_info pointer (happens in case of table_max resize)

* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs

Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
2014-07-28 19:01:25 +00:00
Alexander V. Chernikov
ac35ff1784 Fully switch to named tables:
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
  instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
  number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables

Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask  retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
2014-07-03 22:25:59 +00:00
Ulrich Spörlein
4b85a12f71 Spelling fixes for sbin/ 2012-01-07 16:09:33 +00:00
Ed Schouten
b3608ae18f Replace index() and rindex() calls with strchr() and strrchr().
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.

This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
2012-01-03 18:51:58 +00:00
Eitan Adler
9dad738716 - Add fallthrough comment
Approved by:	pluknet
Found with:	Coverity Prevent(tm)
CID:		10125
2011-12-24 22:37:27 +00:00
Eitan Adler
3b6dc18ef5 - fix duplicate "a a" in some comments
Submitted by:	eadler
Approved by:	simon
MFC after:	3 days
2011-11-13 17:06:33 +00:00
Andrey V. Elsukov
0dba401da6 Improve error reporting. Use corresponding error message when file to be
preprocessed is missing. Also suggest to use absolute pathname if -p option
is specified.

PR:             bin/156653
MFC after:      2 weeks
2011-06-29 06:45:44 +00:00
Andrey V. Elsukov
71f3650a41 Initialize co.use_set variable before parsing each new rule.
PR:		bin/134975
MFC after:	2 weeks
2011-06-06 11:10:38 +00:00
Andrey V. Elsukov
796051d664 Increase buffer size for the command line.
PR:		bin/125370
Submitted by:	sem
MFC after:	2 weeks
2011-06-06 10:52:26 +00:00
Gleb Smirnoff
5221106c04 Whitespace fixes.
Checked with:	md5, diff -w
2011-04-18 21:18:22 +00:00
Luigi Rizzo
c083134268 fix a buffer overflow with large (100k+) number of input lines.
MFC after:	3 days
2010-04-12 08:27:53 +00:00
Luigi Rizzo
6429067819 reduce diffs with the cross-platform version (windows needs
some extra initialization)
2010-03-04 16:54:56 +00:00
Luigi Rizzo
cc4d3c30ea Bring in the most recent version of ipfw and dummynet, developed
and tested over the past two months in the ipfw3-head branch.  This
also happens to be the same code available in the Linux and Windows
ports of ipfw and dummynet.

The major enhancement is a completely restructured version of
dummynet, with support for different packet scheduling algorithms
(loadable at runtime), faster queue/pipe lookup, and a much cleaner
internal architecture and kernel/userland ABI which simplifies
future extensions.

In addition to the existing schedulers (FIFO and WF2Q+), we include
a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new,
very fast version of WF2Q+ called QFQ.

Some test code is also present (in sys/netinet/ipfw/test) that
lets you build and test schedulers in userland.

Also, we have added a compatibility layer that understands requests
from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries,
and replies correctly (at least, it does its best; sometimes you
just cannot tell who sent the request and how to answer).
The compatibility layer should make it possible to MFC this code in a
relatively short time.

Some minor glitches (e.g. handling of ipfw set enable/disable,
and a workaround for a bug in RELENG_7's /sbin/ipfw) will be
fixed with separate commits.

CREDITS:
This work has been partly supported by the ONELAB2 project, and
mostly developed by Riccardo Panicucci and myself.
The code for the qfq scheduler is mostly from Fabio Checconi,
and Marta Carbone and Francesco Magno have helped with testing,
debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
Paolo Pisati
eb2e411915 Implement an ipfw action to reassemble ip packets: reass. 2009-04-01 20:23:47 +00:00
Luigi Rizzo
1fd3fc6988 move a variable declaration to the beginning of the block
(unfortunately, it is far away; we need to pack this code in
a better way).
2009-03-05 08:08:09 +00:00
Luigi Rizzo
3c0c871777 Start splitting the monster file in smaller blocks.
In this episode:
- introduce a common header with a minimal set of common definitions;
- bring the main() function and options parser in main.c
- rename the main functions with an ipfw_ prefix

No code changes except for the introduction of a global variable,
resvd_set_number, which stores the RESVD_SET value from ip_fw.h
and is used to remove the dependency of main.c from ip_fw.h
(and the subtree of dependencies) for just a single constant.
2009-01-27 10:18:55 +00:00