Commit Graph

151 Commits

Author SHA1 Message Date
Peter Wemm
ed2b5a0aef Remove redundant mtx_lock/unlock in ciss_name_device. This is a guaranteed
insta-panic on device add/remove.  This is only called from the notify
thread which already holds the lock while calling this function.
2015-04-02 23:12:18 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
John Baldwin
d17591488e Remove compat shims for FreeBSD versions older than 6 (really early 5).
The only diffs in the disassembly were different line numbers passed to
lock functions.
2015-01-06 15:48:20 +00:00
Steven Hartland
85c9dd9d89 Prevent overflow issues in timeout processing
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision:	https://reviews.freebsd.org/D1157
Reviewed by:	mav, davide
MFC after:	1 month
Sponsored by:	Multiplay
2014-11-21 21:01:24 +00:00
Sean Bruno
0fb31ed073 Add detection for ciss(4) controllers that are set to non-raid JBOD mode.
If a controller is set to JBOD, it has no RAID functions turned on.

Populate even more of the firmware specification headers, copied from
cciss_vol_status.

Reviewed by:	Benesh, Scott <scott.benesh@hp.com>
MFC after:	2 weeks
2014-06-29 18:53:15 +00:00
Sean Bruno
97ed09b5ff Check return of cam_periph_find() before using it in a printf.
If cam_periph_find() doesn't locate the path we requested, bail to error
condition.

Acquire ciss->mtx for this operation.

Reviewed by:	"Benesh, Scott" <scott.benesh@hp.com>
MFC after:	2 weeks
2014-06-29 18:38:44 +00:00
Sean Bruno
739a93997c Fix insta-panic on assert of unlocked periph mtx in ciss(4) when
logical volume state changes.

Currently, I view this as a critical fix for users and will MFC this rapidly as
my testing has shown data loss when the disk is failed by removing it when
under some amount of write activity and this code panics the box.

Reviewed by:	mav@ scottl@
MFC after:	3 days
Sponsored by:	Yahoo! Inc.
2014-04-11 20:19:01 +00:00
Sean Bruno
4cd27111b9 Add PCI-IDs for TBD Gen9 RAID controller HBAs from HP to ciss(4)
Submitted by:	Benesh, Scott <scott.benesh@hp.com>
MFC after:  2 weeks
Sponsored by:	Yahoo! Inc.
2014-04-04 17:01:49 +00:00
Sean Bruno
ec5d9810da Update ciss(4) with new models of raid controllers from HP
Submitted by:	scott.benesh@hp.com
MFC after:	2 weeks
Sponsored by:	Hewlett Packard
2013-08-06 03:17:01 +00:00
Sean Bruno
11f9f6ea9a update ciss debugger command to iterate over multiple raid controllers up to
max controllers supported

PR:	kern/179932
Reviewed by:	Markus Gebert <markus.gebert@hostpoint.ch>
MFC after:	2 weeks
Sponsored by:	Yahoo! Inc.
2013-07-27 17:20:43 +00:00
Sean Bruno
3d3ddb44cd The controller does not zero this data structure, ever.
Zero it out here so we do not misinterpret the data error.

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-28 20:46:32 +00:00
Sean Bruno
e8e4cdbacb Let's align correctly by setting to 17.
OpenCISS states that if the value is 0, then the driver should try a value
of 31.  That's just silly.  Set to 17 so that the subtraction for maxio
becomes 16 and aligns nicely.

Reviewed by:	scottl
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-28 16:35:23 +00:00
Sean Bruno
1e8b29a4ba Its time to retire COMPAQ. I don't think that its coming back. :-)
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-28 16:20:09 +00:00
Sean Bruno
bdde570562 Change maxio to reflect variable hardware configurations.
If max_sg_length is 0, then we default to 16

If max_sg_length is less than CISS_MAX_SG_ELEMENTS, then
we will set round the value of max_sg_length to the nearest
power of 2 and use it to align maxio.

Else, we will use CISS_MAX_SG_ELEMENTS for our calculations.

Thanks to scottl for working me through the history and providing
the basis for this patch.

Submitted by:	scott
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-27 08:40:37 +00:00
Sean Bruno
a618ef521c Adjust the min comparison to look at the adjust value after subtraction, don't
subtract 1 from the chosen value if we are going to use the configued value.

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-26 17:28:45 +00:00
Sean Bruno
78d58a11fc In the case where the controller supports an sg_list LESS than our predefined
and tuned value, we would advertise the unsupported value to CAM and it would
merrily destroy the controller with way too many IO operations.

This manifests itself in a Zero Memory RAID configuration for a P410 and
possibly other controllers.

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-25 23:10:34 +00:00
Sean Bruno
a1abcc4f03 Return a lun count of 1 and a lun id of 0 when CAM attempts a REPORT_LUNS
command on a disk device.  This quieseces some noise on the console that
recently appeared.

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-23 18:29:51 +00:00
Alexander Motin
e5dfa058da MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning.  NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph".  If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
2013-04-14 09:55:48 +00:00
Sean Bruno
a9112e5d7f While investigating a p/r I noted that the camcontrol devlist output for
volumes behind a ciss(4) controller were being reported with malformeed
names and identifiers.

Repair that reporting by using the CAM values for the three SCSI indents
reported via camcontrol devlist

PR:	kern/171650
Reviewed by:	scottl
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-10 23:31:19 +00:00
Sean Bruno
9d29c47198 Notify CAM on state* change to a logical volume not status. This resolves
the issues reported regarding camcontrol devlist not showing the rebuild
states of volumes unless an explicit camcontrol rescan was executed.

PR:	kern/171650
Reviewed by:	scottl@freebsd.org
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-05 21:13:39 +00:00
Sean Bruno
b27556e012 Restore DB_COMMAND capabilities of ciss(4) for debugging and diagnostics
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-03-28 12:44:43 +00:00
Sean Bruno
3ea59fd3a4 Fix compile of ciss(4) with CISS_DEBUG defined
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-03-28 11:00:41 +00:00
Sean Bruno
ee4827b20d The 5300 series ciss(4) board does not work in performant mode with our
currnet initialization sequence.  Set it to simple mode only so that
systems can be updated from stable/7 to newer installations.

At some point, we should figure out why we cannot initialize performant
mode on this board.

PR:		kern/153361
Reviewed by:	scottl
Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-02-25 19:22:56 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Sean Bruno
e3edca225f Satisfy the intent of kern/151564: [ciss] ciss(4) should increase
CISS_MAX_LOGICAL to 107

Submitter wanted to increase the number of logical disks supported by ciss(4)
by simply raising the CISS_MAX_LOGICAL value even higher.  Instead, consult
the documentation for the raid controller (OPENCISS) and poke the controller
bits to ask it for how many logical/physical disks it can handle.

Revert svn R242089 that raised CISS_MAX_LOGICAL to 64 for all controllers.

For older controllers that don't support this mechanism, fallback to the old
value of 16 logical disks.  Tested on P420, P410, P400 and 6i model ciss(4)
controllers.

This should will be MFC'd back to stable/9 stable/8 and stable/7 after the MFC
period.

PR:		kern/151564
Reviewed by:	scottl@freebsd.org
MFC after:	2 weeks
2013-01-15 14:35:35 +00:00
Peter Wemm
4354cca446 Increase the driver-side limit on the number of logical volumes that
the driver will recognize.  I've tested this as far as 25 volumes.
2012-10-25 18:46:02 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Sean Bruno
e17ef00528 Update PCI IDs for ciss controllers that are supported by this driver.
Submitted by:	scott.benesh@hp.com
Obtained from:	Yahoo! Inc and HP
MFC after:	1 week
2012-01-26 17:04:17 +00:00
Sean Bruno
5564c1cdd4 Add support for HP P420 to ciss(4)
Tested on upcoming Gen 8 releases of hardware from HP.

MFC to all supported releases.

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2012-01-18 19:35:16 +00:00
Kenneth D. Merry
130f4520cb Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003.  It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license.  The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

 - Disk and processor device emulation.
 - Tagged queueing
 - SCSI task attribute support (ordered, head of queue, simple tags)
 - SCSI implicit command ordering support.  (e.g. if a read follows a mode
   select, the read will be blocked until the mode select completes.)
 - Full task management support (abort, LUN reset, target reset, etc.)
 - Support for multiple ports
 - Support for multiple simultaneous initiators
 - Support for multiple simultaneous backing stores
 - Persistent reservation support
 - Mode sense/select support
 - Error injection support
 - High Availability support (1)
 - All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
    functional.

ctl.c:			The core of CTL.  Command handlers and processing,
			character driver, and HA support are here.

ctl.h:			Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h:		The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h:	The block and file backend.  This allows for using
			a disk or a file as the backing store for a LUN.
			Multiple threads are started to do I/O to the
			backing device, primarily because the VFS API
			requires that to get any concurrency.

ctl_backend_ramdisk.c:	A "fake" ramdisk backend.  It only allocates a
			small amount of memory to act as a source and sink
			for reads and writes from an initiator.  Therefore
			it cannot be used for any real data, but it can be
			used to test for throughput.  It can also be used
			to test initiators' support for extremely large LUNs.

ctl_cmd_table.c:	This is a table with all 256 possible SCSI opcodes,
			and command handler functions defined for supported
			opcodes.

ctl_debug.h:		Debugging support.

ctl_error.c,
ctl_error.h:		CTL-specific wrappers around the CAM sense building
			functions.

ctl_frontend.c,
ctl_frontend.h:		These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c:	This is a CTL frontend port that is also a CAM SIM.
			This frontend allows for using CTL without any
			target-capable hardware.  So any LUNs you create in
			CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
			This is a frontend port written for Copan to do
			some system-specific tasks that required sending
			commands into CTL from inside the kernel.  This
			isn't entirely relevant to FreeBSD in general,
			but can perhaps be repurposed.

ctl_ha.h:		This is a stubbed-out High Availability API.  Much
			more is needed for full HA support.  See the
			comments in the header and the description of what
			is needed in the README.ctl.txt file for more
			details.

ctl_io.h:		This defines most of the core CTL I/O structures.
			union ctl_io is conceptually very similar to CAM's
			union ccb.

ctl_ioctl.h:		This defines all ioctls available through the CTL
			character device, and the data structures needed
			for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h:		Generic memory pool implementation used by the
			internal frontend.

ctl_private.h:		Private data structres (e.g. CTL softc) and
			function prototypes.  This also includes the SCSI
			vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h:		CTL wrappers around CAM sense printing functions.

ctl_ser_table.c:	Command serialization table.  This defines what
			happens when one type of command is followed by
			another type of command.

ctl_util.c,
ctl_util.h:		CTL utility functions, primarily designed to be
			used from userland.  See ctladm for the primary
			consumer of these functions.  These include CDB
			building functions.

scsi_ctl.c:		CAM target peripheral driver and CTL frontend port.
			This is the path into CTL for commands from
			target-capable hardware/SIMs.

README.ctl.txt:		CTL code features, roadmap, to-do list.

usr.sbin/Makefile:	Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c:		ctladm(8) is the CTL management utility.
			It fills a role similar to camcontrol(8).
			It allow configuring LUNs, issuing commands,
			injecting errors and various other control
			functions.

usr.bin/Makefile:	Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c:	ctlstat(8) fills a role similar to iostat(8).
			It reports I/O statistics for CTL.

sys/conf/files:		Add CTL files.

sys/conf/NOTES:		Add device ctl.

sys/cam/scsi_all.h:	To conform to more recent specs, the inquiry CDB
			length field is now 2 bytes long.

			Add several mode page definitions for CTL.

sys/cam/scsi_all.c:	Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c:	Update for 2 byte inquiry length field.

scsi_da.h:		Add versions of the format and rigid disk pages
			that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC:	Add device ctl.

i386/conf/PAE:		The CTL frontend SIM at least does not compile
			cleanly on PAE.

Sponsored by:	Copan Systems, SGI and Spectra Logic
MFC after:	1 month
2012-01-12 00:34:33 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
Konstantin Belousov
d000b49d26 Cosmetic: make it less confusing when displaying RAID 1 level, that might
be 1+0 as well.

PR:	kern/150936
MFC after:	2 weeks
2010-10-02 08:18:19 +00:00
John Baldwin
aa1385cd7b Initialize the callout structure earlier in attach before calling any
routines that can fail since ciss_free() always tries to stop and drain
the callout.
2010-04-28 18:49:45 +00:00
Alexander Motin
95dab4f2e0 Several changes to fix livelock under high load, introduced by r203489:
- change the way in which command queue overflow is handled;
- do not expose to CAM two command slots, used for driver's internal purposes;
- allow driver to use up to 1024 command slots, instead of 256 before.
2010-03-03 17:58:41 +00:00
Alexander Motin
57ae362c8f When hacking INQUIRY result, make sure that it is right INQUIRY and there
is enough of result to hack.
2010-02-05 12:40:18 +00:00
Alexander Motin
0a65b79f42 Return CAM_RELEASE_SIMQ flag only when it is needed, when SIM really
was frozen before and should be released.
2010-02-04 14:40:08 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Gavin Atkinson
64a026bdcc Don't panic due to unlocking an unowned mutex if we fail during attach.
PR:		kern/139053
Reviewed by:	scottl
Approved by:	ed (mentor)
MFC after:	2 weeks
2009-12-17 17:46:08 +00:00
Scott Long
2fdaa90df8 Sync driver with Yahoo:
- Implement MSI support (MSIX support was already there)
- Use a table to drive MSI/MSIX exceptions
- Pre-calculate the command address instead of wasting cycles doing the
  calculation on every i/o.
2009-09-16 23:27:14 +00:00
Scott Long
744c0d23ea Fix locking around copyout() operations. 2009-09-16 23:17:22 +00:00
Scott Long
b23be3e0a6 Make MSI and PERFORMANT interrupts work correctly. Only require the minimum
number of MSIX interrupts that are needed, and don't strictly check for 4.
Enable enough interrupt mask bits so that the controller will generate
interrupts in PERFORMANT mode.  This fixes the hang-on-boot issues that
people were seeing with newer controllers.
2009-09-16 23:10:10 +00:00
Scott Long
c7241f65ad Increase CISS_MAX_PHYSTGT to 256 so that it matches what the controller might
give us.  Without this, certain data structures get sized incorrectly, leading
to a panic on certain cards that want to use high-value target numbers.
2009-09-16 22:52:20 +00:00
Scott Long
62fdee1dda Fix an apparently harmless typo.
Approved by:	re
2009-07-20 03:59:00 +00:00
Scott Long
de985f6174 Revert the CISS driver to 64K i/o, the previous change was in error and
missing a lot of needed infrastructure.

Approved by:	re
2009-07-13 20:19:29 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Scott Long
7b6d3d4c7b Updated PCI ID's from the vendor 2009-05-19 01:41:11 +00:00
Scott Long
63b9228b0b Tell CAM that CISS logical devices support tagged queueing. This fixes
the low "max device openings" count that has led to poor performance in
FreeBSD 7.0 and 7.1
2009-02-20 07:43:43 +00:00
Scott Long
d69c9c7867 Work again to fix the interrupt masking problems. We now recognize
that there are 3 different interrupt enable bits, 2 for different
families of cards, and 1 for when MSI is used.  Also apply a big
hammer backstop for cards that aren't recognized.  This should fix
all of the interrupt issues at boot.
2008-08-29 01:23:16 +00:00