different hardware address, we should drop it (this should only
happen in promiscuous mode). Relocate the code for this check
from before ng_ether(4) processing to after ng_ether(4) processing.
Also fix a compiler warning.
PR: kern/24465
There are two 3rd party code chunks using this still - the IPv6 stuff and
i4b. Give them a private copy as an alternative to changing them too much.
XXX sys/kernel.h still has a #include <sys/module.h> in it. I will be
taking this out shortly - this affects a number of drivers.
in tunopen())
o Change the default device permissions to 0600 root:wheel
(were uucp:dialer)
o Only let root (suser()) change the MTU
This makes it possible for an administrator to open up the
permissions on /dev/tun*, letting non-root programs service
a tun interface. Co-operation is still required with a
priviledged program that will configure the interface side
of things.
valid) if BPF is missing.
The netgraph_bpf node forced bpf to be present, reflect that in the
options.
Stop doing a 'count bpf' - we provide stubs.
Since a handful of drivers still refer to "bpf.h", provide a more accurate
indication that the API is present always. (eg: netinet6)
would *want* to is a different story, but it used to be able to be done
statically. Get rid of #include "loop.h" and struct ifnet loif[NLOOP];
This could be used as an example of how to do this in other drivers,
for example: ccd.
+ configuration: make sure that the NUL at the end of the config
string is properly detected and handled, and the stats passed
up via sysctl properly reflect which interfaces do bridging.
(The whole config support might make good use of some cleanup
in the future).
+ fixed some bugs related to the corruption of multicast and
broadcast packets: make sure that for those packets the entire
IP + ethernet header is in the mbuf, not in a cluster, so
that writes performed in that area by the upper layers do
not affect us.
+ performance: when calling m_pullup, make room for the ethernet header
as well, we are going to add it in right after. Also, change an m_dup
back to m_copypacket. The former is not necessary anymore now, and
it did not help, anyways.
I will do a fast MFC because 95% of this patch is fixing bad bugs
and i doubt anyone would test the fix in CURRENT. Plus the last
two items mostly bring back some code which was already there in 4.0
times.
inline functions non-inlined. Hide parts of the mutex implementation that
should not be exposed.
Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).
Submitted by: peter
This is because calls with M_WAIT (now M_TRYWAIT) may not wait
forever when nothing is available for allocation, and may end up
returning NULL. Hopefully we now communicate more of the right thing
to developers and make it very clear that it's necessary to check whether
calls with M_(TRY)WAIT also resulted in a failed allocation.
M_TRYWAIT basically means "try harder, block if necessary, but don't
necessarily wait forever." The time spent blocking is tunable with
the kern.ipc.mbuf_wait sysctl.
M_WAIT is now deprecated but still defined for the next little while.
* Fix a typo in a comment in mbuf.h
* Fix some code that was actually passing the mbuf subsystem's M_WAIT to
malloc(). Made it pass M_WAITOK instead. If we were ever to redefine the
value of the M_WAIT flag, this could have became a big problem.
to negotiate from scratch. Make leased lines survive being put into
loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771.
Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be
ignored with "cvs diff -b".)
PR: 11238 and 21771 (bits and pieces)
and had no data available returned 0. Now it returns -1 with errno
set to EWOULDBLOCK (== EAGAIN) as it should. This fix makes the bpf
device usable in threaded programs.
Reviewed by: bde
a tunstart function, which is called when a packet is sucessfully
placed on the queue. This allows us to properly do output byte accounting
within the handoff routine.
spending, which was unused now that all software interrupts have
their own thread. Make the legacy schednetisr use an atomic op
for setting bits in the netisr mask.
Reviewed by: jhb
before adding/removing packets from the queue. Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.
IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue. An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.
Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
* Some dummynet code incorrectly handled a malloc()-allocated pseudo-mbuf
header structure, called "pkt," and could consequently pollute the mbuf
free list if it was ever passed to m_freem(). The fix involved passing not
pkt, but essentially pkt->m_next (which is a real mbuf) to the mbuf
utility routines.
* Also, for dummynet, in bdg_forward(), made the code copy the ethernet header
back into the mbuf (prepended) because the dummynet code that follows expects
it to be there but it is, unfortunately for dummynet, passed to bdg_forward
as a seperate argument.
PRs: kern/19551 ; misc/21534 ; kern/23010
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: bmilekic
Approved by: luigi
<sys/proc.h> to <sys/systm.h>.
Correctly document the #includes needed in the manpage.
Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
seems to be that the nodes are bzero'd beforehand, but the submitter
found that this was not always the case, and in any event defensive
programming here costs epsilon squared.
PR: 22244
Submitted by: Dave Gillam <daveg@chiaro.com>
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.
Define __offsetof() in <machine/ansi.h>
Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>
Remove myriad of local offsetof() definitions.
Remove includes of <stddef.h> in kernel code.
NB: Kernelcode should *never* include from /usr/include !
Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.
Deprecate <struct.h> with a warning. The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.
Paritials reviews by: various.
Significant brucifications by: bde
type of software interrupt. Roughly, what used to be a bit in spending
now maps to a swi thread. Each thread can have multiple handlers, just
like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
software interrupt thread to run, so spending, NSWI, and the shandlers
array are no longer needed. We can now have an arbitrary number of
software interrupt threads. When you register a software interrupt
thread via sinthand_add(), you get back a struct intrhand that you pass
to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
more intuitive. Also, prefix all the members of struct intrhand with
'ih_'.
- Make swi_net() a MI function since there is now no point in it being
MD.
Submitted by: cp
statistics on a per network address basis.
Teach the IPv4 and IPv6 input/output routines to log packets/bytes
against the network address connected to the flow.
Teach netstat to display the per-address stats for IP protocols
when 'netstat -i' is evoked, instead of displaying the per-interface
stats.
Define the NETISR just like all the other NETISRs.
unifdef -Usun -D__FreeBSD__ we will probably never support sun4c
and if we do we can't use the solaris code anyway and I doubt
anybody will be running Fore ATM cards in then in the first place.
sifficient. But somewhere (I believe in the UDP stuff), someone is
overwriting an mbuf without calling m_pullup() first. This results in
broad- and multi-cast traffic that is passed through the bridge getting
corrupted.
This should be backed out when there is some assurance that the upper
layers (and I suppose all of the device drivers) are fixed.
Suggested by: archie
pointer, when bridging and bridge_ipfw are enabled, and when bdg_forward()
happens to free the packet and make our pointer NULL. There may be
more similar problems like this one with calls to bdg_forward().
PR: Related to kern/19551
Reviewed by: jlemon
which hides the 'hole' in the minor bits.
Introduce unit2minor() to do the reverse operation.
Fix some some make_dev() calls which didn't use UID_* or GID_* macros.
Kill the v_hashchain alias macro, it hides the real relationship.
Introduce experimental SI_CHEAPCLONE flag set it on cloned bpfs.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
unsupported address family is used on localhost interface.
looutput: af=0 unexpected
Speculation as to the reasons for my seeing this error are welcome, of
course. :-)
cloning infrastructure standard in kern_conf. Modules are now
the same with or without devfs support.
If you need to detect if devfs is present, in modules or elsewhere,
check the integer variable "devfs_present".
This happily removes an ugly hack from kern/vfs_conf.c.
This forces a rename of the eventhandler and the standard clone
helper function.
Include <sys/eventhandler.h> in <sys/conf.h>: it's a helper #include
like <sys/queue.h>
Remove all #includes of opt_devfs.h they no longer matter.
Remove old DEVFS support fields from dev_t.
Make uid, gid & mode members of dev_t and set them in make_dev().
Use correct uid, gid & mode in make_dev in disk minilayer.
Add support for registering alias names for a dev_t using the
new function make_dev_alias(). These will show up as symlinks
in DEVFS.
Use makedev() rather than make_dev() for MFSs magic devices to prevent
DEVFS from noticing this abuse.
Add a field for DEVFS inode number in dev_t.
Add new DEVFS in fs/devfs.
Add devfs cloning to:
disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
md(4), tun(4), bpf(4), fd(4)
If DEVFS add -d flag to /sbin/inits args to make it mount devfs.
Add commented out DEVFS to GENERIC
it to a mbuf. This patch makes it attach it to mbuf. This patch
is in preperation for Bosko Milekic's mbuf external reference
counting patches.
PR: 19866 (first stage)
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: alfred
length of NWID. This breaks binary compatibility but only the awi driver
refers this ioctl; no userland tools refers it.
Add WEP stuff.
Obtained from: NetBSD current
gif/faith/stf moved to 0xfN entries, since their previous location
is allocated to some other interfaces.
Also add the IFT_PVC, which is the ATM PVC subinterface from ALTQ.
This also syncs us up a bit to NetBSD again.
This change requires a total recompilation of all kmem users, as
itojun told me.
Next in line is synching to the IANI SMI list.
Approved by: itojun
Add spl/splx to various sensitive spots
Change semantics of the vmnet version of the device to keep VMware happy
(don't junk state when the device is closed)
Submitted by: vsilyaev@mindspring.com
delete the cloned route that is associated with the connection.
This does not exhaust the routing table memory when the system
is under a SYN flood attack. The route entry is not deleted if there
is any prior information cached in it.
Reviewed by: Peter Wemm,asmodai
configurations include loadable interfaces. After loading new
interface drivers, perform a 'sysctl -w net.link.ether.bridge_refresh=1'
and the bridge code will reinitialize itself.
Submitted by: <vsilyaev@mindspring.com>
The tap driver is used to present a virtual Ethernet interface to the
system. Packets presented by the network stack to the interface are
made available to a character device in /dev. With tap and the bridge
code, you can make remote bridge configurations where both sides of
the bridge are separated by userland daemons.
This driver also has a special naming hack to allow it to serve a similar
purpose to the vmware port.
Submitted by: myevmenkin@att.com, vsilyaev@mindspring.com
ether_ifdetach().
The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.
Reviewed by: julian, freebsd-net
This means 'options NETGRAPH' is no longer necessary in order to get
netgraph-enabled Ethernet interfaces. This supports loading/unloading
the ng_ether.ko and attaching/detaching the Ethernet interface in any
order.
Add two new hooks 'upper' and 'lower' to allow access to the protocol
demux engine and the raw device, respectively. This enables bridging
to be defined as a netgraph node, if so desired.
Reviewed by: freebsd-net@freebsd.org
address on an interface. This basically allows you to do what my
little setmac module/utility does via ifconfig. This involves the
following changes:
socket.h: define SIOCSIFLLADDR
if.c: add support for SIOCSIFLLADDR, which resets the values in
the arpcom struct and sockaddr_dl for the specified interface.
Note that if the interface is already up, we need to down/up
it in order to program the underlying hardware's receive filter.
ifconfig.c: add lladdr command
ifconfig.8: document lladdr command
You can now force the MAC address on any ethernet interface to be
whatever you want. (The change is not sticky across reboots of course:
we don't actually reprogram the EEPROM or anything.) Actually, you
can reprogram the MAC address on other kinds of interfaces too; this
shouldn't be ethernet-specific (though at the moment it's limited to
6 bytes of address data).
Nobody ran up to me and said "this is the politically correct way to
do this!" so I don't want to hear any complaints from people who think
I could have done it more elegantly. Consider yourselves lucky I didn't
do it by having ifconfig tread all over /dev/kmem.
m_adj() and then check the resulting mbuf for misalignment, copying
backwards to align the mbuf if required.
This fixes a longstanding problem where an mbuf which would have been
properly aligned after an m_adj() was being misaligned and causing an
unaligned access trap in ip_input(). This bug only triggered when booting
diskless.
Reviewed by: dfr
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.
The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.
The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.
Reviewed by: freebsd-net
search routine, and scratching our heads over why it was so obfuscated.
This delta fixes a number of confusing style bugs and renames several
structure members to have more meaningful names. There remain a number
of odd control-flow structures. These changes do not affect the generated
code.
would be returned with a wrong value.
While we're here, get rid of unnecessary panic call.
PR: 17311, 12996, 14457
Submitted by: Patrick Bihan-Faou <patrick@mindstep.com>,
Kris Kennaway <kris@FreeBSD.org>
From the README:
Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
with PCnetMobile firmware by AMD.
BayStack 650 1Mbps Frequency Hopping PCCARD adapter
BayStack 660 2Mbps Direct Sequence PCCARD adapter
Icom SL-200 2Mbps Direct Sequence PCCARD adapter
Melco WLI-PCM 2Mbps Direct Sequence PCCARD adapter
NEL SSMagic 2Mbps Direct Sequence PCCARD adapter
Netwave AirSurfer Plus
1Mbps Frequency Hopping PCCARD adapter
Netwave AirSurfer Pro
2Mbps Direct Sequence PCCARD adapter
Known Problems:
WEP is not supported.
Does not create IBSS itself.
Cannot configure the following on FreeBSD:
selection of infrastructure/adhoc mode
ESSID
...
Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
It was not a good idea to remove csu_header from struct cspace, it had
ramifications which I didn't notice.
Restore src/usr.sbin/ppp/slcompress.h to the way it was, since MAX_HDR
was already defined as 128 there and it's a user program anyway.
In sys/net/slcompress.h make MAX_HDR 128 intead of MLEN to avoid
bloat.
My apologies for any inconvenience.
tree. This considerably reduces unnecessary bloat in struct slcompress.
I'm running with this change right now and have seen no negative
side-effects.
On my sytem this reduced kernel BSS by about 25KB.
Submitted by: bde
Approved by: brian for user-ppp
from iso88025.h.
o Add minimal llc support to iso88025_input.
o Clean up most of the source routing code.
* Submitted by: Nikolai Saoukh <nms@otdel-1.org>
possible for a panic to occur if BPF is in use on the interface at the
time of the call to if_detach. This happens because BPF maintains pointers
to the struct ifnet describing the interface, which is freed by if_detach.
To correct this problem, a new call, bpfdetach, is introduced. bpfdetach
locates BPF descriptor references to the interface, and NULLs them. Other
BPF code is modified so that discovery of a NULL interface results in
ENXIO (already implemented for some calls). Processes blocked on a BPF
call will also be woken up so that they can receive ENXIO.
Interface drivers that invoke bpfattach and if_detach must be modified to
also call bpfattach(ifp) before calling if_detach(ifp). This is relevant
for buses that support hot removal, such as pccard and usb. Patches to
all effected devices will not be committed, only to if_wi.c, due to
testing limitations. To reproduce the crash, load up tcpdump on you
favorite pccard ethernet card, and then eject the card. As some pccard
drivers do not invoke if_detach(ifp), this bug will not manifest itself
for those drivers.
Reviewed by: wes
not the current BPF device should report locally generated packets or not.
This allows sniffing applications to see only packets that are not generated
locally, which can be useful for debugging bridging problems, or other
situations where MAC addresses are not sufficient to identify locally
sourced packets. Default to true for this flag, so as to provide existing
behavior by default.
Introduce two new ioctls, BIOCGSEESENT and BIOCSSEESENT, which may be used
to manipulate this flag from userland, given appropriate privilege.
Modify bpf.4 to document these two new ioctl arguments.
Reviewed by: asmodai
Now most big problem of IPv6 is getting IPv6 address
assignment.
6to4 solve the problem. 6to4 addr is defined like below,
2002: 4byte v4 addr : 2byte SLA ID : 8byte interface ID
The most important point of the address format is that an IPv4 addr
is embeded in it. So any user who has IPv4 addr can get IPv6 address
block with 2byte subnet space. Also, the IPv4 addr is used for
semi-automatic IPv6 over IPv4 tunneling.
With 6to4, getting IPv6 addr become dramatically easy.
The attached patch enable 6to4 extension, and confirmed to work,
between "Richard Seaman, Jr." <dick@tar.com> and me.
Approved by: jkh
Reviewed by: itojun
is triggered when qmail is used with INET6 enabled. The bug
manifests itself in that the space variable can become negative
and that in the comparison in the guards of the 2 loops, this was
not noticed because sizeof() returns an unsigned and thus the signed
variable gets promoted to unsigned. I decided not to make space
unsigned because I think we should guard against this from happening.
Thus panic() in case space becomes negative.
Approved by: jkh
attempt to copy the ethernet header forward and otherwise encapsulate
a packet for output.
This fixes the panic when using VLAN devices on hardware that doesn't
do 802.1Q tagging onboard. (That is to say, all drivers except the Tigon.)
My tests consisted of telnet, ttcp, and a pingflood of packets
between 1 and 1600 (plus headers) bytes.
MFC to follow in 1 week.
Approved by: jkh
Some LAN card chip for fxp is known to cause problem at
interface initialization with IPv6 enabled. It happens at
some delicate timing.
And also, just adding some DELAY before IPv6 address
autoconfiguration is known to avoid the problem.
Complete fix is changing the driver not to use interrupt at
multicast filter initialization, but trying such change in
this stage will be dangerous.
So I add some DELAY() only inside #ifdef INET6 part,
as temporal workaround only for 4.0.
Approbed by: jkh
Noticed by: Mattias Pantzare <pantzer@ludd.luth.se>
Obtained from: openbsd-tech mailing list
tested with LINT. I've put back netatm/kern_include.h and maked it
with a fixme!, otherwise NETISR_ATM isn't defined as ATM_KERNEL isn't
defined. Defining that exposes a whole bunch of other dependencies.. :-(
include this in all kernels. Declare some const *intrq_present
variables that can be checked by a module prior to using *intrq
to queue data.
Make the if_tun module capable of processing atm, ip, ip6, ipx,
natm and netatalk packets when TUNSIFHEAD is ioctl()d on.
Review not required by: freebsd-hackers
tells that tun unit to prepend a four byte address family to packets
queued for tunread() and to expect a four byte address family at the
front of data received by tunwrite().
We queue any protocol received from the interface for tunread(), but
only accept INET, INET6, IPX and NETATALK from tunwrite(). There is
support for Xerox's NS stuff, but AFAICT config(8) doesn't ever
define NS.
|for high speed networks (even at 100Mbit/s this corresponds to 1/300th
|of a second). The default buffer size is 4KB, but libpcap and ipfilter
|both override this (using the BIOCSBLEN ioctl) and allocate 32KB.
|
|The following patch adds an sysctl for bpf_maxbufsize, similar to the
|one for bpf_bufsize that you added back in December 1995. I choose to
|make the default for this limit 512KB (the value suggested by NFR).
Submitted by: se
Reviewed by: phk
Pleases let me make sure that no one touch the invalid ro_rt pointer,
after splx(s) and before next ro_rt initialization.
Though usually this seems to be already called at splnet,
I still sometime experience kernel crash at rtfree() in my
INET6 enabled environment where IPv6 connection is frequently used.
(Off-course, it might be just due to another bug.)
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.
There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)
The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.
The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.
Also removed some uneeded includes from if_aue.c and if_kue.c
Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
-it not seems to be necessary
-to avoid dhcp messages or something like that sent to faith interface
The problem reported by: Jim Bloom <bloom@acm.org>
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
do not pollute the interface further.
o Run if_detach at splnet().
o Creatively swipe the relevant parts of the netatm atm_nif_detach
which will delete the relevant references to the interface going
away.
frame types. Currently it supports only IPX protocol and doesn't
affect existing functionality when not loaded.
Reviewed by: Ollivier Robert <roberto@keltia.freenix.fr>
are configured, and/or associated with a parent device. If you
receive a frame for a VLAN that's not in the list, you walk off
the end of the list. Boom.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
PR: 15291
vlan interfaces it manages. This prevents the interface from
actually sending or receiving data.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
PR: 15290
o be more careful about clearing addresses (this isn't a kludge)
o For AF_INET interfaces, call SIOCDIFFADDR to remove last(?) bit
of cruft.
Special cases for AF_INET shouldn't be here, but I didn't see a good
generic way of doing this. If I missed something, please let me know.
This gross hack makes pccard ejection stable for ethernet cards.
Submitted by: Atushi Onoe-san
possible for ro->ro_rt to be non-NULL even though the RTF_UP flag
is cleared. (Example: a routing daemon or the "route" command
deletes a cloned route in active use by a TCP connection.) In that
case, the code was clobbering a reference to the routing table
entry without decrementing the entry's reference count.
The splnet() call probably isn't needed, but I haven't been able
to prove that yet. It isn't significant from a performance standpoint
since it is executed very rarely.
Reviewed by: wollman and others in the freebsd-current mailing list
packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.
Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
by 2 with people just adding numbers on the end of the ethernet subtypes.
We now have an additional 14 subtypes available in ethernet.
Use one of them immediatly for homePNA.
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
is neither IFF_LOOPBACK or IFF_POINTOPOINT. It's quite common
(and probably more correct) to route local IP numbers via lo0
and it makes configuration easier to assign the hostname address
to local POINTOPOINT links too.
This message usually remains hidden because the loopback interface
gets the highest interface number at boot time, but when the
ethernet interface is added later, the message can get pretty
annoying.
Also, fix a typo.
Not objected to by: freebsd-net
for IPv6 yet)
With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
go to REQ_SENT (and we probably should also log this since it should
only happen in a cross-linked connection).
Submitted by: Mark Tinguely <tinguely@plains.NoDak.edu>
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
completion' flag. If set, the interface output routine will assume that
the packet already has a valid link-level source address. This defaults
to off (the address is overwritten)
PR: kern/10680
Submitted by: "Christopher N . Harrell" <cnh@mindspring.net>
Obtained from: NetBSD
have been there in the first place. A GENERIC kernel shrinks almost 1k.
Add a slightly different safetybelt under nostop for tty drivers.
Add some missing FreeBSD tags
fields in struct cdevsw:
d_stop moved to struct tty.
d_reset already unused.
d_devtotty linkage now provided by dev_t->si_tty.
These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.
The changes in this patch consist of:
initialize dev->si_tty in *_open()
initialize tty->t_stop
remove devtotty functions
rename ttpoll to ttypoll
a few adjustments to these changes in the generic code
a bump of __FreeBSD_version
add a couple of FreeBSD tags
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.
This does not open any security hole, because the bpf core isn't loadable
The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.
Add a couple of missing FreeBSD tags.
the loop and not set an error, so we would then try to access an invalid
mbuf...
PR: 12780
Submitted by: bright@rush.net aka zb^3
a new record in length a pr was open... only about a half hour...
of the additional checks in rev.1.12 was wrong. The others are a
bit inconsistent and are probably unnecessarily pessimal. Checking
for overflow of addition, if necessary at all, should be done in
bpf_validate().
PR: 12484
This doesn't change the size or alignment of the structure on either i386
or Alpha, and thus should be binary-compatible (modulo problems with old
applications and routes with more than 2^15 references).
Reviewed by: peter
This caused a panic in rtfreee() called with a root node from the
routing socket code (when processing a RTM_GET message looking for
the default route while there is none).
Since no existing code seems to have any use getting the root node
from rn_match(), it seems cleaner never to return it rather than
check for this condition at the caller's.
PR: kern/12265
This is inteded for to allow ifconfig to print various unstructured
information from an interface.
The data is returned from the kernel in ASCII form, see the comment in
if.h for some technicalities.
Canonical cut&paste example to be found in if_tun.c
Initial use:
Now tun* interfaces tell the PID of the process which opened them.
Future uses could be (volounteers welcome!):
Have ppp/slip interfaces tell which tty they use.
Make sync interfaces return their media state: red/yellow/blue
alarm, timeslot assignment and so on.
Make ethernets warn about missing heartbeats and/or cables
This means that the driver will add/delete routes when it knows it is
up/down, rather than have the generic code belive it is up if configured.
This is probably most useful for serial lines, although many PHY chips
could probably tell us if we're connected to the cable/hub as well.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it. cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.
cdevsw_add() will print an message if the d_maj field looks bogus.
Remove nblkdev and nchrdev variables. Most places they were used
bogusly. Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.
Move bdevsw() and devsw() functions to kern/kern_conf.c
Bump __FreeBSD_version to 400006
This commit removes:
72 bogus makedev() calls
26 bogus SYSINIT functions
if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.
I4b and vinum not changed. Patches emailed to authors. LINT
probably broken until they catch up.
Reformat and initialize correctly all "struct cdevsw".
Initialize the d_maj and d_bmaj fields.
The d_reset field was not removed, although it is never used.
I used a program to do most of this, so all the files now use the
same consistent format. Please keep it that way.
Vinum and i4b not modified, patches emailed to respective authors.
Submitted by: adrian@freebsd.org
Change reference count in struct ifaddr to a u_int, to be able
to handle more than 2^16 routes to the same interface.
Fix suggested by Andrew Bangs <andrewb@demon.net> in PR kern/10570.
Tested by <adrian@freebsd.org> and me under -current.
o fix DDB support
- include "opt_ddb.h"
- fix Debugger() arg
pointed out by bde
o back out pvc shadow interface support
- it is currently not used
- to make it easier to merge another implementation
o misc minor cleanup
Made a new (inline) function devsw(dev_t dev) and substituted it.
Changed to the BDEV variant to this format as well: bdevsw(dev_t dev)
DEVFS will eventually benefit from this change too.
routines. The descriptor contains parameters which could be used
within those routines (eg. ip_output() ).
On passing, add IPPROTO_PGM entry to netinet/in.h
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
that doesn't have it. This is achieved by having minimal do-nothing stubs
enabled when there are no bpfilter devices configured.
Driver modules should be built with BPF enabled for maximum
convenience (but can be built without it for maximum performance).
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
able to expand the zeros, ones etc masks on the fly. It seems a good
number of domains don't set the rn_maxkey variable anyway, and because
this is a domain itself, there is no guarantee we've been called after
a protocol that actually has set it (ie: inet), so start with a maxkey
of a relatively sane size as a base point until it can adapt on the fly.
it used to be that way. I'm not sure that it's needed, but it does
walk the ifp list..
Incidently, there's nothing to sanity check the ifq_maxlen on loaded
interfaces..
- unifdef -DCOMPAT_IPFW (this was on by default already)
- remove traces of in-kernel ip_nat package, it was never committed.
- Make IPFW and DUMMYNET initialize themselves rather than depend on
compiled-in hooks in ip_init(). This means they initialize the same
way both in-kernel and as kld modules. (IPFW initializes now :-)
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition. eisa, isapnp and pccard* are
not yet using the new resource manager. Once fully converted, all drivers
will be loadable, including PCI and ISA.
(Some other changes appear to have snuck in, including a port of Soren's
ATA driver to the Alpha. Soren, back this out if you need to.)
This is a checkpoint of work-in-progress, but is quite functional.
The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.
Approved by: core
- add support for devices that do vlan tag insertion/deletion in firmware
- add multicast support
- add vlan_unconfig() to complement vlan_config()
- update ifconfig(8) to configure vlan interfaces (vlan tag and
parent device)
Also fix a small bug in ifconfig; sometimes sa_family is overwritten
by ioctls.
Reviewed by: wollman
Move the Olicom token ring driver to the officially sanctionned location of
/sys/contrib. Also fix some brokenness in the generic token ring support.
Be warned that if_dl.h has been changed and SOME programs might
like recompilation.
