Commit Graph

27 Commits

Author SHA1 Message Date
John Baldwin
7048a99c30 Minor overhaul of SMBus support:
- Change smbus_callback() to pass a void * rather than caddr_t.
- Change smbus_bread() to pass a pointer to the count and have it be an
  in/out parameter.  The input is the size of the buffer (same as before),
  but on return it will contain the actual amount of data read back from
  the bus.  Note that this value may be larger than the input value.  It
  is up to the caller to treat this as an error if desired.
- Change the SMB_BREAD ioctl to write out the updated struct smbcmd which
  will contain the actual number of bytes read in the 'count' field.  To
  preserve the previous ABI, the old ioctl value is mapped to SMB_OLD_BREAD
  which doesn't copy the updated smbcmd back out to userland.  I doubt anyone
  actually used the old BREAD anyway as it was rediculous to do a bulk-read
  but not tell the using program how much data was actually read.
- Make the smbus driver and devclass public in the smbus module and
  push all the DRIVER_MODULE()'s for attaching the smbus driver to
  various foosmb drivers out into the foosmb modules.  This makes all
  the foosmb logic centralized and allows new foosmb modules to be
  self-contained w/o having to hack smbus.c everytime a new smbus driver
  is added.
- Add a new SMB_EINVAL error bit and use it in place of EINVAL to return
  an error for bad arguments (such as invalid counts for bread and bwrite).
- Map SMB bus error bits to EIO in smbus_error().
- Make the smbus driver call bus_generic_probe() and require child drivers
  such as smb(4) to create device_t's via identify routines.  Previously,
  smbus just created one anonymous device during attach, and if you had
  multiple drivers that could attach it was just random chance as to which
  driver got to probe for the sole device_t first.
- Add a mutex to the smbus(4) softc and use it in place of dummy splhigh()
  to protect the 'owner' field and perform necessary synchronization for
  smbus_request_bus() and smbus_release_bus().
- Change the bread() and bwrite() methods of alpm(4), amdpm(4), and
  viapm(4) to only perform a single transaction and not try to use a
  loop of multiple transactions for a large request.  The framing and
  commands to use for a large transaction depend on the upper-layer
  protocol (such as SSIF for IPMI over SMBus) from what I can tell, and the
  smb(4) driver never allowed bulk read/writes of more than 32-bytes
  anyway.  The other smb drivers only performed single transactions.
- Fix buffer overflows in the bread() methods of ichsmb(4), alpm(4),
  amdpm(4), amdsmb(4), intpm(4), and nfsmb(4).
- Use SMB_xxx errors in viapm(4).
- Destroy ichsmb(4)'s mutex after bus_generic_detach() to avoid problems
  from child devices making smb upcalls that would use the mutex during
  their detach methods.

MFC after:	1 week
Reviewed by:	jmg (mostly)
2006-09-11 20:52:41 +00:00
Brian Somers
0d10741255 This signal handling code is worse than a no-op. If a
signal is received during the msleep, the msleep is retried
indefinitely as it just keeps returning ERESTART because of
the pending signal.

Instead, just don't PCATCH - the signal can wait.

Sponsored by:	Sophos/ActiveState
2006-01-03 17:01:43 +00:00
Brian Somers
fa6e2680c0 Make ichsmb unloadable.
It seems that the unload problems were due to a dodgy sc->smb usage and a
missing mtx_destroy().

Sponsored by:	ActiveState/Sophos
MFC after:	3 weeks
2005-07-29 00:20:50 +00:00
Takanori Watanabe
2e6e32da7b Make ichsmb(4) child device handling properly. 2005-06-10 16:12:43 +00:00
Takanori Watanabe
6193c1880d Make ichsmb loadable.
PR:	kern/81912
Submitted by:	 nork
2005-06-05 11:55:29 +00:00
Warner Losh
b77e575e1d Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:17:35 +00:00
Joerg Wunsch
a5f50ef9e4 netchild's mega-patch to isolate compiler dependencies into a central
place.

This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.

By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild.  Extension to other compilers is supposed
to be possible, of course.

Submitted by:	netchild
Reviewed by:	various developers on arch@, some time ago
2005-03-02 21:33:29 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Doug Ambrisko
c3c409c498 Add PCI Device ID for 6300ESB ICH. If allocating 16 bytes fails then try 32.
This is also require for 6300ESB.
2004-06-24 18:21:28 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Tom Rhodes
a122cca953 These are changes to allow to use the Intel C/C++ compiler (lang/icc)
to build the kernel. It doesn't affect the operation if gcc.

Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as
icc v8 may define __GNUC__ some parts may look strange but are
necessary.

Additional changes:
 - in_cksum.[ch]:
   * use a generic C version instead of the assembly version in the !gcc
     case (ASM code breaks with the optimizations icc does)
     -> no bad checksums with an icc compiled kernel
     Help from:		andre, grehan, das
     Stolen from: 	alpha version via ppc version
     The entire checksum code should IMHO be replaced with the DragonFly
     version (because it isn't guaranteed future revisions of gcc will
     include similar optimizations) as in:
        ---snip---
          Revision  Changes    Path
          1.12      +1 -0      src/sys/conf/files.i386
          1.4       +142 -558  src/sys/i386/i386/in_cksum.c
          1.5       +33 -69    src/sys/i386/include/in_cksum.h
          1.5       +2 -0      src/sys/netinet/igmp.c
          1.6       +0 -1      src/sys/netinet/in.h
          1.6       +2 -0      src/sys/netinet/ip_icmp.c

          1.4       +3 -4      src/contrib/ipfilter/ip_compat.h
          1.3       +1 -2      src/sbin/natd/icmp.c
          1.4       +0 -1      src/sbin/natd/natd.c
          1.48      +1 -0      src/sys/conf/files
          1.2       +0 -1      src/sys/conf/files.amd64
          1.13      +0 -1      src/sys/conf/files.i386
          1.5       +0 -1      src/sys/conf/files.pc98
          1.7       +1 -1      src/sys/contrib/ipfilter/netinet/fil.c
          1.10      +2 -3      src/sys/contrib/ipfilter/netinet/ip_compat.h
          1.10      +1 -1      src/sys/contrib/ipfilter/netinet/ip_fil.c
          1.7       +1 -1      src/sys/dev/netif/txp/if_txp.c
          1.7       +1 -1      src/sys/net/ip_mroute/ip_mroute.c
          1.7       +1 -2      src/sys/net/ipfw/ip_fw2.c
          1.6       +1 -2      src/sys/netinet/igmp.c
          1.4       +158 -116  src/sys/netinet/in_cksum.c
          1.6       +1 -1      src/sys/netinet/ip_gre.c
          1.7       +1 -2      src/sys/netinet/ip_icmp.c
          1.10      +1 -1      src/sys/netinet/ip_input.c
          1.10      +1 -2      src/sys/netinet/ip_output.c
          1.13      +1 -2      src/sys/netinet/tcp_input.c
          1.9       +1 -2      src/sys/netinet/tcp_output.c
          1.10      +1 -1      src/sys/netinet/tcp_subr.c
          1.10      +1 -1      src/sys/netinet/tcp_syncache.c
          1.9       +1 -2      src/sys/netinet/udp_usrreq.c

          1.5       +1 -2      src/sys/netinet6/ipsec.c
          1.5       +1 -2      src/sys/netproto/ipsec/ipsec.c
          1.5       +1 -1      src/sys/netproto/ipsec/ipsec_input.c
          1.4       +1 -2      src/sys/netproto/ipsec/ipsec_output.c

          and finally remove
            sys/i386/i386        in_cksum.c
            sys/i386/include     in_cksum.h
        ---snip---
 - endian.h:
   * DTRT in C++ mode
 - quad.h:
   * we don't use gcc v1 anymore, remove support for it
   Suggested by:	bde (long ago)
 - assym.h:
   * avoid zero-length arrays (remove dependency on a gcc specific
     feature)
     This change changes the contents of the object file, but as it's
     only used to generate some values for a header, and the generator
     knows how to handle this, there's no impact in the gcc case.
   Explained by:	bde
   Submitted by:	Marius Strobl <marius@alchemy.franken.de>
 - aicasm.c:
   * minor change to teach it about the way icc spells "-nostdinc"
   Not approved by:	gibbs (no reply to my mail)
 - bump __FreeBSD_version (lang/icc needs to know about the changes)

Incarnations of this patch survive gcc compiles since a loooong time,
I use it on my desktop. An icc compiled kernel works since Nov. 2003
(exceptions: snd_* if used as modules), it survives a build of the
entire ports collection with icc.

Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.

Reviewed by:	-arch
Submitted by:	netchild
2004-03-12 21:45:33 +00:00
Nate Lawson
5fd86f39d0 Update the comment to indicate ICH5 support 2003-08-31 19:23:00 +00:00
Nate Lawson
58f946c5f5 Add support for the 82801EB (ICH5) SMBus controller.
PR:		kern/55485
Submitted by:	Shin-ichi Yoshimoto <yosimoto@waishi.jp>
MFC after:	1 day
2003-08-31 01:28:02 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
77e6a3b2dd Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:00:27 +00:00
Yoshihiro Takahashi
0399c2578e typo.
Submitted by:	SAWADA Hodaka <hoda@tail.gr.jp>
MFC after:	1 day
2002-10-18 12:06:01 +00:00
Mark Peek
99c027ed09 Add PCI ID for ICH4 SMBus controller. 2002-08-12 16:22:12 +00:00
John Baldwin
492da65ed7 Detect and attach to the ICH3 SMBus controller.
PR:		i386/36972
Submitted by:	Colin Perkins <csp@isi.edu>
Requested by:	Larry Rosenman <ler@lerctr.org>
MFC After:	7 days
2002-05-08 00:51:54 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
John Baldwin
f34fa851e0 Catch up to header include changes:
- <sys/mutex.h> now requires <sys/systm.h>
- <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
John Baldwin
21bd1ed3bf - Don't pass in MTX_NORECURSE, as that is only used with spin mutexes and
is going away soon anyways.  Instead, don't pass MTX_RECURSE to mtx_init,
  so that WITNESS will panic if the driver mutex is recursed on.
- Use MTX_DEF in mtx_init() instead of assuming that it will be 0.
2001-01-26 03:18:17 +00:00
Archie Cobbs
fa5e41c85d Add missing #include. 2000-12-08 00:49:37 +00:00
Archie Cobbs
3a50ed55e2 Convert from spl -> mutex. 2000-12-07 02:09:39 +00:00
Archie Cobbs
3c5656bf03 Driver for the Intel 82801AA (ICH) SMBus controller and compatibles.
Obtained from:	Whistle source tree
2000-10-06 00:09:46 +00:00