RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
Say it with me, "I will not chain commands with && in Makefiles"
This was originally fixed and explained quite well by bde@ in r36074. The
initial bmake integration caused 'set -e' to stop being used which lead to
r252419. Later 'set -e' expectations were fixed with bmake in r254980.
Because of the && here, errors would be ignored when building in parallel and
a dependency failed. Such as bootstrap-tools since it builds everything in
parallel. If any tool failed in obj/depend/all, it would just ignore the error
and continue to build. This later would result in cascaded errors that only
confused the real issue. This could also cause commands after the failed
command to still execute, leading to more confusion.
This should be fine if the command is in a sub-shell such as: (cmd1 && cmd2)
This reverts r252419.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This allows META_FILES option to be renamed META_MODE.
Also add META_COOKIE_TOUCH for use in targets that can benefit
from a cookie when in meta mode.
Differential Revision: https://reviews.freebsd.org/D4153
Reviewed by: bdrewery
This leads the way for fixing cross-build cleanup, and eventually replacing
'cleandir' with it during the build.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not
used to achieve a safe pseudo-incremental build. This is explained in
more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the
cache, but with a full cache saves 30-50% in build times. When combined with
the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the
resulting dependency file, which it does not do when using mkdep(1)/'CC
-E'. Stats are provided at the end of this message.
This removes the need to modify /etc/make.conf with the CC:= and CXX:=
lines which conflicted with external compiler support [3] (causing the
bootstrap compiler to not be built which lead to obscure failures [4]),
incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid
Clang errors with parenthesis, and did not work with META_MODE.
The option name was picked to match the existing option in ports. This
feature is available for both in-src and out-of-src builds that use
/usr/share/mk.
Linking, assembly compiles, and pre-processing avoid using ccache since it is
only overhead. ccache does nothing special in these modes, although there is
no harm in calling it for them.
CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap
compiler to hash the content of the compiler binary to determine if it
should be a cache miss. For external compilers the 'mtime' option is used
as it is more efficient and likely to be correct. Future work may optimize the
'content' check using the same checks as whether a bootstrap compiler is needed
to be built.
The CCACHE_CPP2 pessimization is currently default in our devel/ccache
port due to Clang requiring it. Clang's -Wparentheses-equality,
-Wtautological-compare, and -Wself-assign warnings do not mix well with
compiling already-pre-processed code that may have expanded macros that
trigger the warnings. GCC has so far not had this issue so it is allowed to
disable the CCACHE_CPP2 default in our port.
Sharing a cache between multiple checkouts, or systems, is explained in
the ccache manual. Sharing a cache over NFS would likely not be worth
it, but syncing cache directories between systems may be useful for an
organization. There is also a memcached backend available [5]. Due to using
an object directory outside of the source directory though you will need to
ensure that both are in the same prefix and all users use the same layout. A
possible working layout is as follows:
Source: /some/prefix/src1
Source: /some/prefix/src2
Source: /some/prefix/src3
Objdir: /some/prefix/obj
Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj'
This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace
all absolute paths to be relative. Using something like this is required due
to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache
adds into its hash for the object without CCACHE_BASEDIR.
distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc.
I have not personally tested this and assume it will not mix well with
using the bootstrap compiler.
The cache from buildworld can be reused in a subdir by first running
'make buildenv' (from r290424).
Note that the cache is currently different depending on whether -j is
used or not due to ccache enabling -fdiagnostics-color automatically if
stderr is a TTY, which bmake only does if not using -j.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files and ccache objects.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
The WITH_FAST_DEPEND feature was used for comparison here as well to show
the dramatic time savings with a full cache.
buildworld:
x buildworld-before
+ buildworld-ccache-empty
* buildworld-ccache-full
% buildworld-ccache-full-fastdep
# buildworld-fastdep
+-------------------------------------------------------------------------------+
|% * # +|
|% * # +|
|% * # xxx +|
| |A |
| A|
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 4519 4525.04 4520.73 4521.59 3.1104823
Difference at 95.0% confidence
758.027 +/- 43.4565
20.1412% +/- 1.15466%
(Student's t, pooled s = 19.1726)
* 3 1823.08 1827.2 1825.62 1825.3 2.0785572
Difference at 95.0% confidence
-1938.26 +/- 43.298
-51.5007% +/- 1.15045%
(Student's t, pooled s = 19.1026)
% 3 1266.96 1279.37 1270.47 1272.2667 6.3971113
Difference at 95.0% confidence
-2491.3 +/- 44.3704
-66.1952% +/- 1.17895%
(Student's t, pooled s = 19.5758)
# 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-ccache-empty
* buildkernel-ccache-empty-fastdep
% buildkernel-ccache-full
# buildkernel-ccache-full-fastdep
@ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|# @ % * |
|# @ % * x + |
|# @ % * xx ++|
| MA |
| MA|
| A |
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 727.97 731.91 728.06 729.31333 2.2492295
Difference at 95.0% confidence
156.88 +/- 4.17129
27.4058% +/- 0.728695%
(Student's t, pooled s = 1.84034)
* 3 527.1 528.29 528.08 527.82333 0.63516402
Difference at 95.0% confidence
-44.61 +/- 2.33254
-7.79305% +/- 0.407478%
(Student's t, pooled s = 1.02909)
% 3 400.4 401.05 400.62 400.69 0.3306055
Difference at 95.0% confidence
-171.743 +/- 2.16453
-30.0023% +/- 0.378128%
(Student's t, pooled s = 0.954969)
# 3 201.94 203.34 202.28 202.52 0.73020545
Difference at 95.0% confidence
-369.913 +/- 2.40293
-64.6212% +/- 0.419774%
(Student's t, pooled s = 1.06015)
@ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
[1] https://ccache.samba.org/performance.html
[2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html
[3] https://reviews.freebsd.org/D3484
[5] https://github.com/jrosdahl/ccache/pull/30
PR: 182944 [4]
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Relnotes: yes
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
The condition used matches the condition in sys.mk for setting _+_ to blank
or +.
With this -n will continue to not descend into Makefile.inc1, while -n -n will
and cause Makefile.inc1's target to run with -n.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is relevant for makeman using the 'make targets' output in src.conf(5).
This makes a _UNIVERSE_TARGETS that removes arm64 if the build
requirements are not met.
bmake specific constructs not needed for make bootstrap so fmake
doesn't see them. This works with fmake just well enough for us to
build bmake to build the rest of the tree without fatal errors. Tested
only with fmake package.
arm64 relies on an external binutils port or package right now, because
the in-tree linker from binutils 2.17.50 does not support arm64. Add
arm64 to universe if the linker is available. If not output a message
that arm64 is skipped.
buildworld and buildkernel use the external binutils automatically, so
it's sufficient to run 'pkg install aarch64-binutils' to build
FreeBSD/arm64.
Differential Revision: https://reviews.freebsd.org/D2302
Reviewed by: andrew, imp
Sponsored by: The FreeBSD Foundation
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Dynamically figure out the list of targets based on tags passed on the mtrees
First sanity check that all packages have existing manifests
Generate the packages
Please note that for now the mtree needs more work as it has duplicate entries,
everything is not yet tagged
The packages now have generic entries and needs to be customize