Garbage in the passed-in buffer can cause problems if any attempts to read
the kenv are inadvertently made between init_static_kenv and the first
kern_setenv -- assuming there is one.
This is cheap and easy, so do it. This also helps rule out some class of
bugs as one tries to debug; tunables fetch from the static environment up
until SI_SUB_KMEM + 1, and many of these buffers are global ~4k buffers that
rely on BSS clearing while others just grab a page of free memory and use it
(e.g. xen).
Execution of "Soft reset" command (IG4_REG_RESETS_SKL) at controller init
stage sets SDA_HOLD register value to 0x0001 which is often too low for
normal operation.
Set SDA_HOLD back to 28 after reset to restore controller functionality.
PR: 240339
Reported by: imp, GregV, et al.
MFC after: 3 days
Setting the B_INVALONERR flag before a synchronous write causes the buf
cache to forcibly invalidate contents if the write fails (BIO_ERROR).
This is intended to be used to allow layers above the buffer cache to make
more informed decisions about when discarding dirty buffers without
successful write is acceptable.
As a proof of concept, use in msdosfs to handle failures to mark the on-disk
'dirty' bit during rw mount or ro->rw update.
Extending this to other filesystems is left as future work.
PR: 210316
Reviewed by: kib (with objections)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21539
When SO_TIMESTAMP is set, the kernel will attempt to attach a timestamp as
ancillary data to each IP datagram that is received on the socket. However,
it may fail, for example due to insufficient memory. In that case the
packet will still be received but not timestamp will be attached.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21607
When communicating with a FUSE server that implements version 7.8 (or older)
of the FUSE protocol, the FUSE_WRITE request structure is 16 bytes shorter
than normal. The protocol version check wasn't applied universally, leading
to an extra 16 bytes being sent to such servers. The extra bytes were
allocated and bzero()d, so there was no information disclosure.
Reviewed by: emaste
MFC after: 3 days
MFC-With: r350665
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21557
ping(8) uses SO_TIMESTAMP, which attaches a timestamp to each IP datagram at
the time it's received by the kernel. Except that occasionally it doesn't.
Add a check to see whether such a timestamp was actually set before trying
to read it. This fixes segfaults that can happen when the kernel doesn't
attach a timestamp.
The bug has always existed, but prior to r351461 it manifested as an
implausible round-trip-time, not a segfault.
Reported by: pho
MFC after: 3 days
MFC-With: 351461
Don't call arc4random() unconditionally to initialize sc_iss, and
then when syncookies are enabled, just overwrite it with the
return value from from syncookie_generate(). Instead, only call
arc4random() to initialize sc_iss when syncookies are not
enabled.
Note that on a system under a syn flood attack, arc4random()
becomes quite expensive, and the chacha_poly crypto that it calls
is one of the more expensive things happening on the
system. Removing this unneeded arc4random() call reduces CPU from
about 40% to about 35% in my test scenario (Broadwell Xeon, 6Mpps
syn flood attack).
Reviewed by: rrs, tuxen, bz
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21591
This was used to store the mtime of the source file in a commment in a
generated header file. This is of little-to-no diagnostic value and
the result doesn't even end up in the source tree.
Reported by: arichardson
Reviewed by: arichardson
MFC after: 1 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21605
fdt_is_compatible_strict() inspects the first compatible property.
We need to inspect the following properties for 'riscv'.
ofw_bus_node_is_compatible() does a recursive search.
This patch fixes "Can't find CPU" error message when bootverbose = true.
Submitted by: Nicholas O'Brien (nickisobrien_gmail.com)
Reviewed by: philip, kp
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21576
sb_tls_flags, its just the sb_flags. Also the ratelimit
code, now that the defintion is in sockbuf.h, does not
need the ktls.h file (or its predecessor).
Sponsored by: Netflix Inc
- make abday, day, abmon, mon, am_pm output quoting match linux
- workaround localeconv() issue for mon_grouping and grouping (PR172215)
- for other values not available in default locale, output -1 instead of
127 (CHAR_MAX) as returned by localeconv()
With these changes, output of `locale` and `locale -k` for all keywords
specified by POSIX exactly matches the linux one.
PR: 237752
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D21599
Multiple tools use @generated to identify generated files (for example,
in a review Phabricator will by default hide diffs in enerated files).
Use the @generated tag in makesyscalls.sh as we've done for other
generated files.
':'. It's slightly wasteful, but much easier (and the savings in bytes
at runtime would be tiny, but the code to do it larger).
Submitted by: Sebastian Huber
This command simply returns 0 at the moment and explicitly takes no
arguments. This should be used by utilities wanting to see if bectl can
operate on the system they're running, or with a specific root (`bectl -r`).
It may grow more checks than "will libbe successfully init" in the future,
but for now this is enough as that checks for the dataset mounted at "/" and
that it looks capable of being a BE root (e.g. it's not a top-level dataset)
bectl commands can now specify if they want to be silent, and this will turn
off libbe_print_on_error so they can control the output as needed. This is
already used in `bectl check`, and may be turned on in the future for some
other commands where libbe errors are better suppressed as the failure mode
may be obvious.
Requested by: David Fullard
MFC after: 3 days
Just return EINVAL if flags != 0. The Linux man page documents one
case of EINVAL as "The filesystem does not support one of the flags in
flags."
After r351723 userland binaries will try using new system calls.
Reported by: mjg
Reviewed by: mjg, trasz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21590
A work callback may restart itself. Loop in the drain function to see if the
work has been rescheduled and stop the subsequent reschedules, if any.
MFC after: 1 week
Sponsored by: Mellanox Technologies
This function is not needed anymore, it allows old sh binary to continue
to run and avoid breaking backward compatibility.
Note that is now just calls the regular _el_fn_complete which does a proper
job at quoting.
Discussed with: jilles
It is typical to have one, but no longer true for multi-actuator HDDs
with separate LUN for each actuator.
MFC after: 4 days
Sponsored by: iXsystems, Inc.
ioctl(2) handling. This allows doing the pps_event() work in the polling
routine, instead of using a taskqueue task to do that work.
Also, add PNPINFO, and switch to using make_dev_s() to create the cdev.
Using a spin mutex and calling pps_event() from the polling function works
around the situation which requires more than 2 sets of timecounter
timehands in a single-core system to get reliable PPS capture. That problem
would happen when a single-core system is idle in cpu_idle() then gets woken
up with an event timer event which was scheduled to handle a hardclock tick.
That processing path would end up calling tc_windup 3 or 4 times between
when the tc polling function was called and when the taskqueue task would
eventually run, and with only two sets of timehands, the th_generation count
would always be too old to allow the captured PPS data to be used.
The box drawing characters we use aren't necessarily safe with a serial
console; for instance, in the report by npn@, these were causing his xterm
to send back a sequence that lua picked up as input and halted the boot.
This is less than ideal.
Fallback to ASCII frames for console with 'comconsole' in it. This is a
partial revert r338108 by imp@ -- instead of removing the menu entirely and
disabling color/cursor sequences, just reverting the default frame to ASCII
is enough to not break in this setup.
Reported by: npn
Triaged and recommended by: tsoome
Due to lock ordering issues (bucket lock held, vnode locks wanted) the code
starts with trylocking which in face of contention often fails. Prior to
the change it would loop back with a possible yield.
Instead note we know what locks are needed and can take them in the right
order, avoiding retries. Then we can safely re-lookup and see if the entry
we are looking for is still there.
On a 104-way box poudriere would result in constant retries during an 11h
run as seen in the vfs.cache.zap_and_exit_bucket_fail counter.
before: 408866592
after : 0
However, a new stat reports:
vfs.cache.zap_and_exit_bucket_relock_success: 32638
Note this is only a bandaid over current design issues.
Tested by: pho
Sponsored by: The FreeBSD Foundation
It used to be mp_ncpus * 64, but this gives unnecessarily big values for small
machines and at the same time constraints bigger ones. In particular this helps
on a 104-way box for which the count is now doubled.
While here make cache_purgevfs less likely. Currently it is not efficient in
face of contention due to lock ordering issues. These are fixable but not worth
it at the moment.
Sponsored by: The FreeBSD Foundation
- VM_ALLOC_NOCREAT will grab without creating a page.
- vm_page_grab_valid() will grab and page in if necessary.
- vm_page_busy_acquire() automates some busy acquire loops.
Discussed with: alc, kib, markj
Tested by: pho (part of larger branch)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21546
races with page busy state. The object lock is still used as an interlock
to ensure that the identity stays valid. Most callers should use
vm_page_sleep_if_busy() to handle the locking particulars.
Reviewed by: alc, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21255
