Submitted by: fgray@rice.edu
this driver hasn't been checked but as a separate module, bringing it in won't
break anything else and it't the best way of testing it......
julian
line discipline interrupt handlers more or less expect to be called at
spltty() == splimp(), although they have internal splimp()s that are
bogus if this expectation is satisfied. They are called at splsoftty()
from many tty drivers, so they were not protected from being reentered
from their own netisrs. They certainly don't expect that but are
apparently remarkably robust if it occurs. The problem in PR 798 seems
to be caused by pppstart() being reentered and finishing off the output
in progress by following the (stale) sc->sc_outm pointer. Then the
original pppstart() finds garbage in m2 after MFREE(m, m2). slstart()
doesn't have internal state like sc_outm so reentry of it probably only
causes out of order and dropped packets.
in the FIN_WAIT_2 state in order to prevent the conn. hanging there
forever.
Reviewed by: davidg, olah
Submitted by: Arne Henrik Juul <arnej@imf.unit.no>
Obtained from: bugs@netbsd.org
modularization of the wd/wcd/atapi driver is ugly.
Include cons.h from a less bogus place.
Removed an ARGSUSED. Unused args are normal for devswitch functions
and lint was informed about them for about 5 functions out of 1000.
Lint should be informed about them, if at all, in some other way.
Remove confusing backwards compatibility code that allowed driver to be
used in pre-4.4 releases. The 3COM card's use -link2 to switch tranceivers.
(no functional changes here)
This code will only be included in your kernel if you have
'options DEVRANDOM', but that will fall away in a couple of days.
Obtained from: Theodore Ts'o, Linux
The goal is to make them "user-friendly" :-)
In the end this will allow a SNMP style "getnext" function, sysctl editing
in the boot-editor and/or debugger, LKMs can define sysctl vars when
they get loaded, and remove them when unloaded and other interesting
uses for dynamic sysctl variables.
convention of having their entry point named "<modname>_mod"".
Symorder is enforcing this when the current bsd.kmod.mk is installed.
I've not tested all these, but at least they all compile now.
Reattach them to the makefile.
Note that the change that I made to symorder needs to be compiled and
installed before any LKM's will work - the last version was corrupting
the relocation tables. A "make world" will to this, but if you
manually run a make on the lkm's you'll need to take care of it by
hand.
PR 795.
Set the size before one error return from sysctl_vnode() the same as before
the other. The caller might want to know about the amount successfully
read although the current caller doesn't.
If RAMENB is set in devconfig, walk the external SCBs. Some Intel Xpress
motherboards set this bit.
For external SCBs for the 3940. It doesn't set RAMPS or RAMENB, but does
have the ram.
the new seeprom format and negotiate up to 20MHz sync if set in SCSI-Select.
Reduce the complexity of the timeout code by running it at splhigh(). Fix
a bug that caused rescheduled timeouts at 0 clock ticks in the future causing
an infinite loop.
Obtained from: Timeout bug noticed by David Greenman and wcarchive.
in each phase routine. Saves a few instructions.
Be more careful in how we deal with SXFRCTL0. Or in the control bits of
interest instead of using mvi. The kernel driver will set the ULTRAEN
bit of SXFRCTL0 if we are using Ultra (20MHz) mode and we don't want to
clobber it.
In sdtr_to_rate divide by two if we are in ultra mode to get the correct
setting since its a 20MHz instead of 10MHz scale.
Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
"I screwed the initialization of the burstsize. Right now it will default
to 0 (which can cause corruption problems on high latency PCI buses). It
should be set to 8 longwords to avoid problems with certain PCI chipsets."
Submitted by: Matt Thomas <matt@lkg.dec.com>
at the end of each write for writes of more than 1K.
Fixed handling of residual count for early returns in writes to pty masters.
It was only adjusted in 2 out of 6 cases.
Added prototypes.
TTYHOG = 1024 bytes, 10 cblocks were reserved. This was thought to
provide 10 * CBSIZE = 1080 bytes of buffering, but if the head pointer
is at the end of a cblock, then it only provides 1 + 9 * CBSIZE = 973
bytes of buffering. This caused serious data loss for ptys because the
flow control is deterministic and requires at least TTYHOG bytes of
buffering. For ttys, if input flow control is used then there is
usually enough slop in the high watermark to avoid problems, and if
input flow control isn't used then a limit of 973 is not much different
from a limit of 1024.
Add prototypes.
Continue cleaning up new init stuff.
the !COMPAT_43 case - use a common function even when there is no
`old' function. The diffs for this are large because of code motion
to restore the function order to what it was before the pseudo-argument
changes.
Include <sys/sysproto.h> to get correct args structs and prototypes.
The diffs for this are large because the declarations of the args structs
were moved to become comments in the function headers. The comments may
actually match the automatically generated declarations right now.
Add prototypes.
