Commit Graph

1711 Commits

Author SHA1 Message Date
Navdeep Parhar
ce9ac139d4 ip6_output runs with the inp lock held, just like ip_output. 2017-05-10 00:14:55 +00:00
Michael Tuexen
d274bcc661 Fix an issue with MTU calculation if an ICMP messaeg is received
for an SCTP/UDP packet.

MFC after:	1 week
2017-04-26 20:21:05 +00:00
Michael Tuexen
6ebfa5ee14 Use consistently uint32_t for mtu values.
This does not change functionality, but this cleanup is need for further
improvements of ICMP handling.

MFC after:	1 week
2017-04-26 19:26:40 +00:00
Kristof Provost
d78c0804fb Rename variable for clarity
Rename the mtu variable in ip6_fragment(), because mtu is misleading. The
variable actually holds the fragment length.
No functional change.

Suggested by: ae
2017-04-22 13:04:36 +00:00
Kristof Provost
00eab743ab pf: Fix possible incorrect IPv6 fragmentation
When forwarding pf tracks the size of the largest fragment in a fragmented
packet, and refragments based on this size.
It failed to ensure that this size was a multiple of 8 (as is required for all
but the last fragment), so it could end up generating incorrect fragments.

For example, if we received an 8 byte and 12 byte fragment pf would emit a first
fragment with 12 bytes of payload and the final fragment would claim to be at
offset 8 (not 12).

We now assert that the fragment size is a multiple of 8 in ip6_fragment(), so
other users won't make the same mistake.

Reported by:	Antonios Atlasis <aatlasis at secfu net>
MFC after:	3 days
2017-04-20 09:05:53 +00:00
Andrey V. Elsukov
c33a231337 Rework r316770 to make it protocol independent and general, like we
do for streaming sockets.

And do more cleanup in the sbappendaddr_locked_internal() to prevent
leak information from existing mbuf to the one, that will be possible
created later by netgraph.

Suggested by:	glebius
Tested by:	Irina Liakh <spell at itl ua>
MFC after:	1 week
2017-04-14 09:00:48 +00:00
Andrey V. Elsukov
8428914909 Clear h/w csum flags on mbuf handled by UDP.
When checksums of received IP and UDP header already checked, UDP uses
sbappendaddr_locked() to pass received data to the socket.
sbappendaddr_locked() uses given mbuf as is, and if NIC supports checksum
offloading, mbuf contains csum_data and csum_flags that were calculated
for already stripped headers. Some NICs support only limited checksums
offloading and do not use CSUM_PSEUDO_HDR flag, and csum_data contains
some value that UDP/TCP should use for pseudo header checksum calculation.

When L2TP is used for tunneling with mpd5, ng_ksocket receives mbuf with
filled csum_flags and csum_data, that were calculated for outer headers.
When L2TP header is stripped, a packet that was tunneled goes to the IP
layer and due to presence of csum_flags (without CSUM_PSEUDO_HDR) and
csum_data, the UDP/TCP checksum check fails for this packet.

Reported by:	Irina Liakh <spell at itl ua>
Tested by:	Irina Liakh <spell at itl ua>
MFC after:	1 week
2017-04-13 17:03:57 +00:00
Steven Hartland
4d806fc663 Allow explicitly assigned IPv6 loopback address to be used in jails
If a jail has an explicitly assigned IPv6 loopback address then allow it
to be used instead of remapping requests for the loopback adddress to the
first IPv6 address assigned to the jail.

This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.

This is the same fix applied to IPv4 fix by: r316313

Also:
* Correct the description of prison_check_ip6_locked to match the code.

MFC after:	2 weeks
Relnotes:	Yes
Sponsored by:	Multiplay
2017-03-31 09:10:05 +00:00
Mike Karels
8c1960d506 Fix reference count leak with L2 caching.
ip_forward, TCP/IPv6, and probably SCTP leaked references to L2 cache
entry because they used their own routes on the stack, not in_pcb routes.
The original model for route caching was callers that provided a route
structure to ip{,6}input() would keep the route, and this model was used
for L2 caching as well. Instead, change L2 caching to be done by default
only when using a route structure in the in_pcb; the pcb deallocation
code frees L2 as well as L3 cacches. A separate change will add route
caching to TCP/IPv6.

Another suggestion was to have the transport protocols indicate willingness
to use L2 caching, but this approach keeps the changes in the network
level

Reviewed by:    ae gnn
MFC after:      2 weeks
Differential Revision:  https://reviews.freebsd.org/D10059
2017-03-25 15:06:28 +00:00
Alan Somers
559b42968c Constrain IPv6 routes to single FIBs when net.add_addr_allfibs=0
sys/netinet6/icmp6.c
	Use the interface's FIB for source address selection in ICMPv6 error
	responses.

sys/netinet6/in6.c
	In in6_newaddrmsg, announce arrival of local addresses on the
	interface's FIB only.  In in6_lltable_rtcheck, use a per-fib ND6
	cache instead of a single cache.

sys/netinet6/in6_src.c
	In in6_selectsrc, use the caller's fib instead of the default fib.
	In in6_selectsrc_socket, remove a superfluous check.

sys/netinet6/nd6.c
	In nd6_lle_event, use the interface's fib for routing socket
	messages.  In nd6_is_new_addr_neighbor, check all FIBs when trying
	to determine whether an address is a neighbor.  Also, simplify the
	code for point to point interfaces.

sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
	Make defrouter_select fib-aware, and make all of its callers pass in
	the interface fib.

sys/netinet6/nd6_nbr.c
	When inputting a Neighbor Solicitation packet, consider the
	interface fib instead of the default fib for DAD.  Output NS and
	Neighbor Advertisement packets on the correct fib.

sys/netinet6/nd6_rtr.c
	Allow installing the same host route on different interfaces in
	different FIBs.  If rt_add_addr_allfibs=0, only install or delete
	the prefix route on the interface fib.

tests/sys/netinet/fibs_test.sh
	Clear some expected failures, but add a skip for the newly revealed
	BUG217871.

PR:		196361
Submitted by:	Erick Turnquist <jhujhiti@adjectivism.org>
Reported by:	Jason Healy <jhealy@logn.net>
Reviewed by:	asomers
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9451
2017-03-17 16:50:37 +00:00
Ermal Luçi
dce33a45c9 The patch provides the same socket option as Linux IP_ORIGDSTADDR.
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.

The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.

This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.

Reviewed by:	adrian, aw
Approved by:	ae (mentor)
Sponsored by:	rsync.net
Differential Revision:	D9235
2017-03-06 04:01:58 +00:00
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Andrey V. Elsukov
9907aba370 When IPv6 fragments reassembly is complete, update mbuf's csum_data
and csum_flags using information from all fragments. This fixes
dropping of reassembled packets due to wrong checksum when the IPv6
checksum offloading is enabled on a network card.

Obtained from:	Yandex LLC
MFC after:	1 week
Sponsored by:	Yandex LLC
2017-02-28 22:58:19 +00:00
Andrey V. Elsukov
627c036f65 Remove IPsec related PCB code from SCTP.
The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.

SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.

To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.

Reported by:	tuexen
Reviewed by:	tuexen
Differential Revision:	https://reviews.freebsd.org/D9538
2017-02-13 11:37:52 +00:00
Ermal Luçi
c10c5b1eba Committed without approval from mentor.
Reported by:	gnn
2017-02-12 06:56:33 +00:00
Ermal Luçi
70d81c5e91 Use proper value for socket option on IPv6
Reported-by: ohartmann@walstatt.org
2017-02-10 06:20:27 +00:00
Ermal Luçi
4616026faf Revert r313527
Heh svn is not git
2017-02-10 05:58:16 +00:00
Ermal Luçi
c0fadfdbbf Correct missed variable name.
Reported-by: ohartmann@walstatt.org
2017-02-10 05:51:39 +00:00
Ermal Luçi
ed55edceef The patch provides the same socket option as Linux IP_ORIGDSTADDR.
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.

The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.

This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.

Sponsored-by: rsync.net
Differential Revision: D9235
Reviewed-by: adrian
2017-02-10 05:16:14 +00:00
Andrey V. Elsukov
fcf596178b Merge projects/ipsec into head/.
Small summary
 -------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
  option IPSEC_SUPPORT added. It enables support for loading
  and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
  default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
  support was removed. Added TCP/UDP checksum handling for
  inbound packets that were decapsulated by transport mode SAs.
  setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
  build as part of ipsec.ko module (or with IPSEC kernel).
  It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
  methods. The only one header file <netipsec/ipsec_support.h>
  should be included to declare all the needed things to work
  with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
  Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
  - now all security associations stored in the single SPI namespace,
    and all SAs MUST have unique SPI.
  - several hash tables added to speed up lookups in SADB.
  - SADB now uses rmlock to protect access, and concurrent threads
    can do SA lookups in the same time.
  - many PF_KEY message handlers were reworked to reflect changes
    in SADB.
  - SADB_UPDATE message was extended to support new PF_KEY headers:
    SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
    can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
  avoid locking protection for ipsecrequest. Now we support
  only limited number (4) of bundled SAs, but they are supported
  for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
  used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
  check for full history of applied IPsec transforms.
o References counting rules for security policies and security
  associations were changed. The proper SA locking added into xform
  code.
o xform code was also changed. Now it is possible to unregister xforms.
  tdb_xxx structures were changed and renamed to reflect changes in
  SADB/SPDB, and changed rules for locking and refcounting.

Reviewed by:	gnn, wblock
Obtained from:	Yandex LLC
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
Andriy Voskoboinyk
2bbd06fc33 Garbage collect IFT_IEEE80211 (but leave the define for possible reuse)
This interface type ("a parent interface of wlanX") is not used since
r287197

Reviewed by:	adrian, glebius
Differential Revision:	https://reviews.freebsd.org/D9308
2017-01-28 17:08:40 +00:00
Luiz Otavio O Souza
338e227ac0 After the in_control() changes in r257692, an existing address is
(intentionally) deleted first and then completely added again (so all the
events, announces and hooks are given a chance to run).

This cause an issue with CARP where the existing CARP data structure is
removed together with the last address for a given VHID, which will cause
a subsequent fail when the address is later re-added.

This change fixes this issue by adding a new flag to keep the CARP data
structure when an address is not being removed.

There was an additional issue with IPv6 CARP addresses, where the CARP data
structure would never be removed after a change and lead to VHIDs which
cannot be destroyed.

Reviewed by:	glebius
Obtained from:	pfSense
MFC after:	2 weeks
Sponsored by:	Rubicon Communications, LLC (Netgate)
2017-01-25 19:04:08 +00:00
Hans Petter Selasky
f3e7afe2d7 Implement kernel support for hardware rate limited sockets.
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.

- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.

- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().

- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.

- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.

- How rate limiting works:

1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.

2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.

3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.

4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.

Reviewed by:		wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision:	https://reviews.freebsd.org/D3687
Sponsored by:		Mellanox Technologies
MFC after:		3 months
2017-01-18 13:31:17 +00:00
Mark Johnston
762d16d9e4 Improve some of the sysctl descriptions added in r299827.
Submitted by:	Marie Helene Kvello-Aune <marieheleneka@gmail.com>
		(original version)
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D5336
2017-01-16 19:35:19 +00:00
Maxim Sobolev
339efd75a4 Add a new socket option SO_TS_CLOCK to pick from several different clock
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:

o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).

In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.

Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.

This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.

There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.

Reviewed by:    adrian, gnn
Differential Revision:  https://reviews.freebsd.org/D9171
2017-01-16 17:46:38 +00:00
Mark Johnston
8cd3b2042c Release the ND6 list lock before making a prefix off-link in nd6_timer().
Reported by:	Jim <BM-2cWfdfG5CJsquqkJyry7hZT9LypbSEWEkQ@bitmessage.ch>
X-MFC With:	r306829
2017-01-08 18:46:00 +00:00
Michael Tuexen
b7b84c0e02 Whitespace changes.
The toolchain for processing the sources has been updated. No functional
change.

MFC after:	3 days
2016-12-26 11:06:41 +00:00
Mark Johnston
62280740d6 Remove a bogus KASSERT from nd6_prefix_unlink().
The caller may unlink a prefix before purging referencing addresses. An
identical assertion in nd6_prefix_del() verifies that the addresses are
purged before the prefix is freed.

PR:		215372
X-MFC With:	r306829
2016-12-19 19:21:28 +00:00
Andrey V. Elsukov
ad9f4d6ab6 ip[6]_tryforward does inbound and outbound packet firewall processing.
This can lead to change of mbuf pointer (packet filter could do m_pullup(),
NAT, etc). Also in case of change of destination address, tryforward can
decide that packet should be handled by local system. In this case modified
mbuf can be returned to the ip[6]_input(). To handle this correctly, check
M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present,
update variables that depend from mbuf pointer and skip another inbound
firewall processing.

No objection from:	#network
MFC after:	3 weeks
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
Andrey V. Elsukov
8a030e9c6e Modify IPv6 statistic accounting in ip6_input().
Add rcvif local variable to keep inbound interface pointer. Count
ifs6_in_discard errors in all "goto bad" cases. Now it will count
errors even if mbuf was freed. Modify all places where m->m_pkthdr.rcvif
is used to use local rcvif variable.

Obtained from:	Yandex LLC
MFC after:	1 month
2016-12-12 11:26:59 +00:00
Andrey V. Elsukov
5a1842a24a Add ip6_tryforward() - a run to completion forwarding implementation
for IPv6.

It gets performance benefits from reduced number of checks. It doesn't
copy mbuf to be able send ICMPv6 error message, because it keeps mbuf
unchanged until the moment, when the route decision has been made.
It doesn't do IPsec checks, and when some IPsec security policies present,
ip6_input() uses normal slow path.

Reviewed by:	bz, gnn
Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D8527
2016-12-12 10:57:32 +00:00
Michael Tuexen
5b495f17a5 Whitespace changes.
The tools using to generate the sources has been updated and produces
different whitespaces. Commit this seperately to avoid intermixing
these with real code changes.

MFC after:	3 days
2016-12-06 10:21:25 +00:00
Michael Tuexen
3e1465754f Make ICMPv6 hard error handling for TCP consistent with the ICMPv4
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
  to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
  to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
  to the TCP user for both IPv4 and IPv6.
  For IPv6 the TCP connected was dropped but errno wasn't set.

Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
2016-10-21 10:32:57 +00:00
George V. Neville-Neil
aec9c8d5a5 Limit the number of mbufs that can be allocated for IPV6_2292PKTOPTIONS
(and IPV6_PKTOPTIONS).

PR:		100219
Submitted by:	Joseph Kong
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D5157
2016-10-17 23:25:31 +00:00
Gleb Smirnoff
cc94f0c2d7 - Revert r300854, r303657 which tried to fix regression from r297225.
- Fix the regression proper way using RO_RTFREE().

Submitted by:	ae
2016-10-13 20:15:47 +00:00
Mark Johnston
d748f7efcd Lock the ND prefix list and add refcounting for prefixes.
This change extends the nd6 lock to protect the ND prefix list as well
as the list of advertising routers associated with each prefix. To handle
cases where the nd6 lock must be dropped while iterating over either the
prefix or default router lists, a generation counter is used to track
modifications to the lists. Additionally, a new mutex is used to serialize
prefix on-link/off-link transitions. This mutex must be acquired before
the nd6 lock and is held while updating the routing table in
nd6_prefix_onlink() and nd6_prefix_offlink().

Reviewed by:	ae, tuexen (SCTP bits)
Tested by:	Jason Wolfe <jason@llnw.com>,
		Larry Rosenman <ler@lerctr.org>
MFC after:	2 months
Differential Revision:	https://reviews.freebsd.org/D8125
2016-10-07 21:10:53 +00:00
Mark Johnston
c26158449e Reduce the number of conditional statements in nd6_prefix_onlink().
MFC after:	1 week
2016-10-07 21:03:18 +00:00
Mark Johnston
7b0e84b7c8 Combine several checks in nd6_prefix_offlink() into one.
MFC after:	1 week
2016-10-07 21:02:30 +00:00
Mark Johnston
7782accf13 Fix whitespace around prototypes in nd6_rtr.c.
MFC after:	1 week
2016-10-07 00:36:18 +00:00
Mark Johnston
07c1f95976 Fix a typo.
MFC after:	1 week
2016-10-07 00:35:28 +00:00
Mark Johnston
a88d6d7e07 Shorten and simplify some of the loops in pfxlist_onlink_check().
No functional change intended.

MFC after:	1 week
2016-10-07 00:34:57 +00:00
Mark Johnston
f7d91d8cdd Use a const reference to prefixes in nd6_is_new_addr_neighbor().
MFC after:	1 week
2016-10-07 00:26:36 +00:00
Mark Johnston
0ed7d74424 nd6_dad_timer(): don't assert that the address is tentative.
It appears that this assertion can be tripped in some cases when
multiple interfaces are on the same link. Until this is resolved, revert a
part of r306305 and simply log a message if the DAD timer fires on a
non-tentative address.

Reported by:	jhb
X-MFC With:	r306305
2016-10-01 01:30:34 +00:00
Andrey V. Elsukov
5a03e7819a Fix bug introduced in r274300.
In icmp6_reflect() use original source address of erroneous packet as
destination address for source selection algorithm when original
destination address is not one of our own.

Reported by:	Mark Kamichoff <prox at prolixium com>
Tested by:	Mark Kamichoff <prox at prolixium com>
MFC after:	1 week
2016-09-29 19:57:37 +00:00
Mark Johnston
970fe0938e Convert checks in nd6_dad_start() and nd6_dad_timer() to assertions.
In particular, these functions can assume they are operating on tentative
addresses.

MFC after:	2 weeks
2016-09-24 21:40:24 +00:00
Mark Johnston
0bbf244e9f Rename ndpr_refcnt to ndpr_addrcnt.
This field counts derived addresses and is not a true refcount for prefix
objects, so the previous name was misleading.

MFC after:	1 week
2016-09-24 01:14:25 +00:00
Mark Johnston
2d12d25c6a Reduce code duplication around NDP message handlers in icmp6_input().
No functional change intended.

MFC after:	2 weeks
2016-09-20 18:08:17 +00:00
Kevin Lo
c3bef61e58 Remove the 4.3BSD compatible macro m_copy(), use m_copym() instead.
Reviewed by:	gnn
Differential Revision:	https://reviews.freebsd.org/D7878
2016-09-15 07:41:48 +00:00
Mike Karels
0f5687f2ae Fix L2 caching for UDP over IPv6
ip6_output() was missing cache invalidation code analougous to
ip_output.c. r304545 disabled L2 caching for UDP/IPv6 as a workaround.
This change adds the missing cache invalidation code and reverts
r304545.

Reviewed by:	gnn
Approved by:	gnn (mentor)
Tested by:	peter@, Mike Andrews
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D7591
2016-08-24 00:52:30 +00:00
Bjoern A. Zeeb
77ecef378a Remove the kernel optoion for IPSEC_FILTERTUNNEL, which was deprecated
more than 7 years ago in favour of a sysctl in r192648.
2016-08-21 18:55:30 +00:00