tunable_mbinit() where it is next to where it is used later.
Change the sysinit level of tunable_mbinit() from SI_SUB_TUNABLES
to SI_SUB_KMEM after the VM is running. This allows to use better
methods to determine the effectively available physical and virtual
memory available to the kernel.
Update comments.
In a second step it can be merged into mbuf_init().
- unp_zone: kern.ipc.maxsockets limit reached
- socket_zone: kern.ipc.maxsockets limit reached
- zone_mbuf: kern.ipc.nmbufs limit reached
- zone_clust: kern.ipc.nmbclusters limit reached
- zone_jumbop: kern.ipc.nmbjumbop limit reached
- zone_jumbo9: kern.ipc.nmbjumbo9 limit reached
- zone_jumbo16: kern.ipc.nmbjumbo16 limit reached
Note that those warnings are printed not often than every five minutes and can
be globally turned off by setting sysctl/tunable vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
kernel memory, whichever is lower. The overall mbuf related memory
limit must be set so that mbufs (and clusters of various sizes)
can't exhaust physical RAM or KVM.
The limit is set to half of the physical RAM or KVM (whichever is
lower) as the baseline. In any normal scenario we want to leave
at least half of the physmem/kvm for other kernel functions and
userspace to prevent it from swapping too easily. Via a tunable
kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm.
At the same time divorce maxfiles from maxusers and set maxfiles to
physpages / 8 with a floor based on maxusers. This way busy servers
can make use of the significantly increased mbuf limits with a much
larger number of open sockets.
Tidy up ordering in init_param2() and check up on some users of
those values calculated here.
Out of the overall mbuf memory limit 2K clusters and 4K (page size)
clusters to get 1/4 each because these are the most heavily used mbuf
sizes. 2K clusters are used for MTU 1500 ethernet inbound packets.
4K clusters are used whenever possible for sends on sockets and thus
outbound packets. The larger cluster sizes of 9K and 16K are limited
to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used
these large clusters will end up only on the inbound path. They are
not used on outbound, there it's still 4K. Yes, that will stay that
way because otherwise we run into lots of complications in the
stack. And it really isn't a problem, so don't make a scene.
Normal mbufs (256B) weren't limited at all previously. This was
problematic as there are certain places in the kernel that on
allocation failure of clusters try to piece together their packet
from smaller mbufs.
The mbuf limit is the number of all other mbuf sizes together plus
some more to allow for standalone mbufs (ACK for example) and to
send off a copy of a cluster. Unfortunately there isn't a way to
set an overall limit for all mbuf memory together as UMA doesn't
support such a limiting.
NB: Every cluster also has an mbuf associated with it.
Two examples on the revised mbuf sizing limits:
1GB KVM:
512MB limit for mbufs
419,430 mbufs
65,536 2K mbuf clusters
32,768 4K mbuf clusters
9,709 9K mbuf clusters
5,461 16K mbuf clusters
16GB RAM:
8GB limit for mbufs
33,554,432 mbufs
1,048,576 2K mbuf clusters
524,288 4K mbuf clusters
155,344 9K mbuf clusters
87,381 16K mbuf clusters
These defaults should be sufficient for even the most demanding
network loads.
MFC after: 1 month
Some hooks are added to clamp down maxusers and nmbclusters for
small address space systems.
VM_MAX_AUTOTUNE_MAXUSERS - the max maxusers that will be autotuned based on
physical memory.
VM_MAX_AUTOTUNE_NMBCLUSTERS - max nmbclusters based on physical memory.
These are set to the old values on i386 to preserve the clamping that was
being done to all arches.
Another macro VM_AUTOTUNE_NMBCLUSTERS is provided to allow an override
for the calculation on a MD basis. Currently no arch defines this.
Reviewed by: peter
MFC after: 2 weeks
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.
In collaboration with: jhb
allocator for the jumbo frames zones. This change has two benefits: (1) a
custom back-end deallocator is no longer required. UMA's standard
deallocator suffices. (2) It eliminates a potentially confusing artifact
of using contigmalloc(): The malloc(9) statistics contain bogus information
about the usage of jumbo frames. Specifically, the malloc(9) statistics
report all jumbo frames in use whereas the UMA zone statistics report the
"truth" about the number in use vs. the number free.
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
the field in the mbuf constructors, since otherwise we have no way to
tell if they are valid. In the future, Kip has plans to add a flag
specifically to indicate validity, which is the preferred model.
by running the tunable_mbinit() SYSINIT at SI_ORDER_MIDDLE
before the init_maxsockets() SYSINT at SI_ORDER_ANY.
Reviewed by: rwatson, zec
Sponsored by: The FreeBSD Foundation
MFC after: 4 weeks
UMA_SLAB_KERNEL for consistency with its sibling UMA_SLAB_KMEM.
(UMA_SLAB_KMAP met its original demise in revision 1.30 of
vm/uma_core.c.) UMA_SLAB_KERNEL is now required by the jumbo frame
allocators. Without it, UMA cannot correctly return pages from the
jumbo frame zones to the VM system because it resets the pages' object
field to NULL instead of the kernel object. In more detail, the jumbo
frame zones are created with the option UMA_ZONE_REFCNT. This causes
UMA to overwrite the pages' object field with the address of the slab.
However, when UMA wants to release these pages, it doesn't know how to
restore the object field, so it sets it to NULL. This change teaches
UMA how to reset the object field to the kernel object.
Crashes reported by: kris
Fix tested by: kris
Fix discussed with: jeff
MFC after: 6 weeks
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.
Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.
Likely break the only non-convetional user of the API, after informing
the relevant committer.
Update the mbuf(9) manual page, which was already out of sync on
this point.
Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.
This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.
This does not affect the memory layout or size of mbufs.
Parental oversight by: sam and rwatson.
No MFC is anticipated.
on 1/2 of each of the successive limits tied to the limit for
2k clusters.
- Adds real functionality in so that doing a sysctl to change these
actually changes them :-)
MFC after: 1 week
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
not being independently freeable. This allows one to embed an mbuf in
the cluster itself. This confers the benefits of the packet zone on
all cluster sizes. Embedded mbufs currently suffer from the same
limitation that packet zone mbufs do in that one cannot disconnect
them and pass them around independently of the cluster. It would
likely be possible to eliminate this limitation in the future by
adding a second reference for the mbuf itself.
Approved by: re(gnn)
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.
Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.
In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported. In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
zone. Cluster allocations fail when this happens. Also processes that may have
blocked on cluster allocations will never be woken up. Thanks to rwatson for
an overview of the issue and pointers to the mbuma paper and his tool to dump
out UMA zones.
Reviewed by: andre@
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
- Move sonewconn(), which creates new sockets for incoming connections on
listen sockets, so that all socket allocate code is together in
uipc_socket.c.
- Move 'maxsockets' and associated sysctls to uipc_socket.c with the
socket allocation code.
- Move kern.ipc sysctl node to uipc_socket.c, add a SYSCTL_DECL() for it
to sysctl.h and remove lots of scattered implementations in various
IPC modules.
- Sort sodealloc() after soalloc() in uipc_socket.c for dependency order
reasons. Statisticize soalloc() and sodealloc() as they are now
required only in uipc_socket.c, and are internal to the socket
implementation.
After this change, socket allocation and deallocation is entirely
centralized in one file, and uipc_socket2.c consists entirely of socket
buffer manipulation and default protocol switch functions.
MFC after: 1 month
jumbo mbuf clusters. To make the variable size clear they are named
MJUMPAGESIZE.
Having jumbo clusters with the native PAGE_SIZE is more useful than
a fixed 4k size according the device driver writers using this API.
The 9k and 16k jumbo mbuf clusters remain unchanged.
Requested by: glebius, gallatin
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
The success of the cluster allocation is checked through a field in the
mbuf structure. This change is non-functional but properly silences code
inspection tools.
Found by: Coverity Prevent(tm)
Coverity ID: CID807
Sponsored by: TCP/IP Optimization Fundraise 2005
4k clusters in addition to 9k and 16k ones.
struct mbuf *m_getjcl(int how, short type, int flags, int size)
void *m_cljget(struct mbuf *m, int how, int size)
m_getjcl() returns an mbuf with a cluster of the specified size attached
like m_getcl() does for 2k clusters.
m_cljget() is different from m_clget() as it can allocate clusters
without attaching them to an mbuf. In that case the return value
is the pointer to the cluster of the requested size. If an mbuf was
specified, it gets the cluster attached to it and the return value
can be safely ignored.
For size both take MCLBYTES, MJUM4BYTES, MJUM9BYTES, MJUM16BYTES.
Reviewed by: glebius
Tested by: glebius
Sponsored by: TCP/IP Optimization Fundraise 2005
from there. All others get broken up and free'd individually to the mbuf
and cluster zones.
The packet zone is a secondary zone to the mbuf zone. There is currently
a limitation in UMA which prevents decreasing the packet zone stock when
the mbuf and cluster zone are drained and all their members are part of
packets. When this is fixed this change may be reverted.
based jumbo 9k and jumbo 16k cluster support.
All mbuf's with external storage attached are mandatory reference
counted. For clusters and jumbo clusters UMA provides the refcnt
storage directly. It does not have to be separatly allocated. Any
other type of external storage gets its own refcnt allocated from
an UMA mbuf refcnt zone instead of normal kernel malloc.
The refcount API MEXT_ADD_REF() and MEXT_REM_REF() is no longer
publically accessible. The proper m_* functions have to be used.
mb_ctor_clust() and mb_dtor_clust() both handle normal 2K as well
as 9k and 16k clusters.
Clusters and jumbo clusters may be obtained without attaching it
immideatly to an mbuf. This is for high performance cluster
allocation in network drivers where mbufs are attached after the
cluster has been filled.
Tested by: rwatson
Sponsored by: TCP/IP Optimizations Fundraise 2005
