Commit Graph

18 Commits

Author SHA1 Message Date
Konstantin Belousov
6992112349 Commit the 64-bit inode project.
Extend the ino_t, dev_t, nlink_t types to 64-bit ints.  Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment.  Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.

ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks.  Unfortunately, not everything can be
fixed, especially outside the base system.  For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.

Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.

Struct xvnode changed layout, no compat shims are provided.

For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.

Update note: strictly follow the instructions in UPDATING.  Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.

Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb).  Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver.  Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem).  Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).

Sponsored by:	The FreeBSD Foundation (emaste, kib)
Differential revision:	https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
Konstantin Belousov
d9d09103dd Use standard Versions.def for libprocstat.
This makes the versions inheritance consistent for our versioned libraries.

Extracted from:	ino64
Discussed with:	kan
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2017-01-09 11:11:52 +00:00
Konstantin Belousov
06c76d249c Use tab for indent.
Extracted from:	ino64 work by gleb
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2017-01-09 10:47:20 +00:00
Marcel Moolenaar
2b4da8aa20 When MAKEOBJDIRPREFIX points to a case-insensitive file system, the
build can break when different source files create the same target
files (case-insensitivity speaking).  This is the case for object
files compiled with -fpic and shared libraries. The former uses
an extension of ".So", and the latter an extension ".so".  Rename
shared object files from *.So to *.pico to match what NetBSD does.

See also r305855

MFC after:	1 month
Sponsored by:	Bracket Computing
Differential Revision:	https://reviews.freebsd.org/D7906
2016-09-24 15:11:27 +00:00
Glen Barber
a70cba9582 First pass through library packaging.
Sponsored by:	The FreeBSD Foundation
2016-02-04 21:16:35 +00:00
Allan Jude
04017fc7a4 Create links to the libprocstat man pages for all of the libprocstat functions so they can be looked up by name
Add a cross refrence to libprocstat in the procstat.1 man page

Differential Revision:	https://reviews.freebsd.org/D2578
Suggested by:	jmg
Reviewed by:	brueffer
Approved by:	wblock (mentor)
MFC after:	1 week
Sponsored by:	ScaleEngine Inc.
2015-05-21 03:32:44 +00:00
Baptiste Daroussin
6b129086dc Convert libraries to use LIBADD
While here reduce a bit overlinking
2014-11-25 11:07:26 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Davide Italiano
237abf0c56 - Trim an unused and bogus Makefile for mount_smbfs.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
2013-06-28 21:00:08 +00:00
Mikolaj Golub
7153ad2b72 Make libprocstat(3) extract procstat notes from a process core file.
PR:		kern/173723
Suggested by:	jhb
Glanced by:	kib
MFC after:	1 month
2013-04-20 07:47:26 +00:00
Attilio Rao
2e564269d0 Disconnect non-MPSAFE SMBFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.

In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.

Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.

This is not targeted for MFC.
2012-10-18 12:04:56 +00:00
Attilio Rao
a42ac676f5 Disconnect non-MPSAFE NTFS from the build in preparation for dropping
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.

In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.

This is not targeted for MFC.
2012-10-17 11:30:00 +00:00
Attilio Rao
e6116d5b8e Disconnect non-MPSAFE NWFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.

In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.

This is not targeted for MFC.
2012-10-17 11:16:17 +00:00
Sergey Kandaurov
c66ca7723b Provide a simple manual page for libprocstat(3).
Reviewed by:	jilles, gjb
2011-07-12 13:46:13 +00:00
Sergey Kandaurov
76341556c9 Add missing libkvm and libutil dependencies.
Now libprocstat takes care of its own dependencies and does not
require applications to specify them.

Reviewed by:	stas, jilles
2011-06-25 11:21:23 +00:00
Stanislav Sedov
2f7e4c22b9 - Add symbol versioning to libprocstat.
Suggested by:	kib
2011-05-14 22:15:38 +00:00
Stanislav Sedov
59ea47d08d - Don't try to build NWFS support module if NCP/IPX is disabled in the build.
- Rename ZFS definition to LIBPROCSTAT_ZFS to be consistent with NWFS and to
  prevent possible collisions.

Reported by:	many
2011-05-12 22:21:39 +00:00
Stanislav Sedov
0daf62d9f5 - Commit work from libprocstat project. These patches add support for runtime
file and processes information retrieval from the running kernel via sysctl
  in the form of new library, libprocstat.  The library also supports KVM backend
  for analyzing memory crash dumps.  Both procstat(1) and fstat(1) utilities have
  been modified to take advantage of the library (as the bonus point the fstat(1)
  utility no longer need superuser privileges to operate), and the procstat(1)
  utility is now able to display information from memory dumps as well.

  The newly introduced fuser(1) utility also uses this library and able to operate
  via sysctl and kvm backends.

  The library is by no means complete (e.g. KVM backend is missing vnode name
  resolution routines, and there're no manpages for the library itself) so I
  plan to improve it further.  I'm commiting it so it will get wider exposure
  and review.

  We won't be able to MFC this work as it relies on changes in HEAD, which
  was introduced some time ago, that break kernel ABI.  OTOH we may be able
  to merge the library with KVM backend if we really need it there.

Discussed with:	rwatson
2011-05-12 10:11:39 +00:00