This standalone module is the last vestage of ATM support in the tree so
send it on its way.
Reviewed by: manu, emaste
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D38880
Most ATM support was removed prior to FreeBSD 12. The netgraph support
was kept as it was less intrusive, but it is presumed to be unused.
Reviewed by: manu
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D38879
and remove non-present symbols that are now reported by kmod_syms.awk.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32878
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
This node is part of an A10-NSP (L2-BSA) development.
Carrier networks tend to stack three or more tags for internal
purposes and therefore hiding the service tags deep inside of the
stack. When decomposing such an access network frame, the processing
order is typically reversed: First distinguish by service, than by
other means.
This new netgragh node allows to bring the relevant VLAN in front (to
the out-most position). This way other netgraph nodes (like ng_vlan)
can operate on this specific type.
Reviewed by: manpages (gbe), brueffer (manpages), kp
Approved by: kp (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: IKS Service GmbH
Differential Revision: https://reviews.freebsd.org/D22076
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.
Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.
This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.
PR: 237083
Reviewed by: hps, emax
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21071
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
Support for compression has been available from July 2007 but it
was never imported due to concerns with patents once held by
STAC/HiFn. The issues have clearly been resolved so bring it
in now.
Special thanks to Brett Glass for preserving the code and
pointing documentation for the expiration case.
Obtained from: mav (through Brett Glass)
Relnotes: yes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6739
options into kern.opts.mk and change all the places where we use
src.opts.mk to pull in the options. Conditionally define SYSDIR and
use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all
instances of CURDIR/../../etc with STSDIR, but only in the affected
files.
As a special compatibility hack, include bsd.owm.mk at the top of
kern.opts.mk to allow the bare build of sys/modules to work on older
systems. If the defaults ever change between 9.x, 10.x and current for
these options, however, you'll wind up with the host OS' defaults
rather than the -current defaults. This hack will be removed when
we no longer need to support this build scenario.
Reviewed by: jhb
Differential Revision: https://phabric.freebsd.org/D529
opt_inet6.h into kmod.mk by forcing almost everybody to eat the same
dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h
targets here too.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
it had no hooks. It has abused ifnet's if_afdata slot and actually
abused every subsystem it touched.
lagg(4) is a proper trunking solution at ifnet(9) layer.
ng_one2many(4) is a proper trunking solution in netgraph(4).
build it with and without INET/INET6 support.
Submitted by: Alexander V. Chernikov <melifaro at yandex-team.ru> [1]
Tested by: Alexander V. Chernikov <melifaro at yandex-team.ru> [1]
Approved by: re (bz)
MFC after: 2 weeks
passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.
Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com>
Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with: net@
Approved by: mav (mentor)
MFC after: 1 month
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
in FreeBSD 5.x to allow network device drivers to run with Giant
despite the network stack being Giant-free. This significantly
simplifies calls into ioctl() on network interfaces, especially
in the multicast code, as well as eliminates deferred invocation
of interface if_start routines.
Disable the build on device drivers still depending on
IFF_NEEDSGIANT as they no longer compile. They will be removed
in a few weeks if they haven't been made MPSAFE in that time.
Disabled drivers:
if_ar
if_axe
if_aue
if_cdce
if_cue
if_kue
if_ray
if_rue
if_rum
if_sr
if_udav
if_ural
if_zyd
Drivers that were already disabled because of tty changes:
if_ppp
if_sl
Discussed on: arch@
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
As clearly mentioned on the mailing lists, there is a list of drivers
that have not been ported to the MPSAFE TTY layer yet. Remove them from
the kernel configuration files. This means people can now still use
these drivers if they explicitly put them in their kernel configuration
file, which is good.
People should keep in mind that after August 10, these drivers will not
work anymore. Even though owners of the hardware are capable of getting
these drivers working again, I will see if I can at least get them to a
compilable state (if time permits).
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)