which was causing the link of the kernel to fail. Since layer4/i4b_l4mgmt.c
is always required by i4b and layer3/i4b_q931.c is only needed when a
passive card is present it makes sense to have the declaration in the
former file only.
No MFC required since the problem only became apparent after a change to
the compile options in -current which AFAIK wasn't made in -stable.
form L0IFPI2UNIT. This could result in a panic if the user tried to
trace using isdntrace(8). I fixed this locally but forgot to commit it.
Reminded by: "Wittig, Christoph" <wc@medianet-world.de>
lengths for CONNECT_REQ and CONNECT_IND are incorrect, which causes
dialouts to fail after certain error situations (an invalid -- not
wrong! -- number has been dialed). Since these messages are tagged as
too short, the device reads trailing garbage as the B protocol
parameters; this is OK as long as the garbage consists of zero bytes,
which it usually does, except after the said error.
Another change we have taken into use is to send an explicit Q.850
"normal call clearing" code when a call is ignored using PRI equipment
(specifically AVM T1); the CAPI pseudo-code for ignore, 1, translates
into something at least Ericsson exchanges interpret oddly (message
"this area is not reachable from your number"). NCCLR makes the exchange
give a busy signal, which is the behaviour at least we prefer
(conceivably, the ignore code could be made a sysctl variable).
The attached patch corrects the message length issue. It also includes a
somewhat unpretty solution for the PRI ignore code (if device's number
of channels equals 30, assume PRI and send NCCLR, otherwise send CAPI
ignore). Tested using AVM B1 PCI and T1 PCI.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Reviewed by: hm
MFC after: 1 month
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
Add a CAPI (hardware independent) driver i4bcapi(4) and hardware driver
iavc (4) to support active CAPI-based BRI and PRI cards (currently AVM
B1 and T1 cards) to isdn4bsd.
Reviewed by: hm
Bug in i4btel driver read routine corrected. The conditions in the
while() clause caused the receive queue to be referenced before checking
if a channel is connected, leading to kernel panic (do a 'dd
if=/dev/i4btel0 of=/dev/null' on an unconnected tel device, panic will
follow). Correction was to reorder the while clause conditions to check
for connectedness first.
Merge rev's 1.65 and 1.66 from sys/net/if_spppsubr.c (implement the
`restart' option, and fix a blatant bug with PAP authentication).
The i4b implementation of this file should be merged back, but for now,
we need this here as well.
Reviewed by: gj
There are two 3rd party code chunks using this still - the IPv6 stuff and
i4b. Give them a private copy as an alternative to changing them too much.
XXX sys/kernel.h still has a #include <sys/module.h> in it. I will be
taking this out shortly - this affects a number of drivers.
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
- remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
broken the handling of uncompressed VJ packets. The attached diff should
hopefully fix that.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: Sergio de Souza Prallon <prallon@tmp.com.br>
from Traverse Technology and also the Teles PCI-TJ cards both based on the
chipset combination of the Siemens ISAC and the TJNet Tiger300/320 chips.
The itjc/i4b_hdlc.h file will hopefully soon be merged with the file
/usr/src/sys/i4b/layer1/i4b_hdlc.h.
Submitted by: Sergio de Souza Prallon <prallon@tmp.com.br>
enables the driver to work on current (I have not tested the isa part fully,
but I suppose it should work). The patching from jlemon caused a crash at
probe time. This is probably my fault not having added a comment for
"RESET_SOFT" saying: "this resets all!".
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
avma1pp_attach_avma1pp, since the former may be called multiple
times and we only want to initialize the mutex once.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
This version is functional and is aproaching solid..
notice I said APROACHING. There are many node types I cannot test
I have tested: echo hole ppp socket vjc iface tee bpf async tty
The rest compile and "Look" right. More changes to follow.
DEBUGGING is enabled in this code to help if people have problems.
format version number. (userland programs should not need to be
recompiled when the netgraph kernel internal ABI is changed.
Also fix modules that don;t handle the fact that a caller may not supply
a return message pointer. (benign at the moment because the calling code
checks, but that will change)
