This removes the getuid check for delay==0. It didn't prevent users from
writing similar programs in the general case. In theory, if top(1) is
among one of the few restricted programs you're allowed to run, it may
have helped a little, but there are better ways of handling that case.
I had changed this from a for loop to a memset during an earlier
cleanup. This change was incorrect so revert it.
While here, clean up
Reported by: flo
- By popular demand, implement a different switch ("T") for toggling
between thread id and process id.
- Add an assert that the size of command chars is as expected.
- Also clean up some messiness I found when implementing this.
- Further document the new flag.
Requested by: flo, ronald-lists@klop.ws, bapt
PR: 139389 (for the record)
X-MFC-With: r334474
- Change headers to more closely match what we use
- use more standard functions instead of bzero, bcmp, bcopy
- Add myself to authors.
Tested with: base clang (amd64), gcc 9 (amd64), base clang (i386), base
gcc (mips)
- avoid the need to call a function to get size of known array. I'll
likely re-arrange some of the indirect in a later to avoid the magic
constants.
- use correct type
- add const
- replace caddr_t with void*. This corrects an alignment warning.
- remove duplicated include from immediately prior commit
Under base clang we're now down to:
- 3 warning in top.c, 1 warning in mahcine.c, 4 warning in display.c,
- 1 warning in utils.c
Tested with base clang, gcc7, gcc9, base gcc (mips)
- Add const where helpful
- add missing 'static' for file-local functions
- use nitems where possible
- convert manual abort() to assert
- use strndup instead of homegrown version
Tested with clang, gcc7, and gcc9
In fixing issues with uid > INT_MAX, I broke the uid without username
case. The latter is more important so return the old state.
Discussed with: allanjude
One of the downsides of using numeric WARNS is that if we only have a
single type of issue we get no protection from other changes. For
example, we got no warning for missing variable declaration, due to
the issues with "const".
For this utility, explicitly list out the warnings which are failing.
They should still be fixed, so only reduce them to warning instead of
error.
Tested with: clang base (amd64, i386), gcc6, gcc7, gcc9, gcc base (mips)
- use bool instead of int [0]
- use calloc correctly [0]
(this also caught an incorrect sizeof argument) [1]
- use size_t over int [2]
- correct style
Reported by: pfg [0], scan-build [1], gcc [2]
- Prefer calloc over malloc. This is more predicable and we're not in a
performance sensitive context. [1]
- Remove bogus comment (obsolete from prior commit). [2]
- Remove void casts and type casts of NULL
- Remove redundant declaration of 'quit'
- Add additional const
Reported by: kib [1], vangyzen [2]
Allow to show only a single process specified by PID. This could
be done either by running top like 'top -p PID' or using the 'p' command
inside top.
Reviewed by: eadler
Approved by: eadler
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D15501
- Prefer using ansi prototypes rather than C prototypes
- Keep type on separate line from name of function
- Try to keep things const where possible. This will help get to WARNS=6
- switch to "bool" where it makes sense
Some users prefer seeing the TID when viewing individual threads. This
makes sense as the PID will be the same for multiple entries. An attempt
was made to include both, but there is insufficient room. As such, using
the TID.
While here, rename the header variables to be more understandable.
Discussed with: mmacy
Reported on: 2009-10-07
This corrects a warning issues by gcc9:
/srv/src/freebsd/head/usr.bin/top/machine.c:988:22: warning: '%5zu'
directive writing between 5 and 20 bytes into a
region of size 15 [-Wformat-overflow=]
sprintf(status, "?%5zu", state);
Remove 'top.local.hs'. This was not noticed since
/srv/obj/fbsd/srv/src/freebsd/svn/head/amd64.amd64/usr.bin/top/top.local.h
existed locally on my machine despite "make clean". Only fully removing
the objdir allowed me to observe the error directly.
Pointyhat to: me
This leaves at WARNS=6:
35 warnings in top.c
88 warnings in machine.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
- Replace caddr_t with "void *". This reduces
the number of warnings at WARNS=6
- use "static" where possible
- sprinkle const where possible
This leaves at WARNS=6:
35 warnings in top.c
88 warnings in machine.c
7 warnings in commands.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
- Replace caddr_t with "void *". This reduces
the number of warnings at WARNS=6
- use "static" where possible
- sprinkle const where possible
This leaves at WARNS=6:
35 warnings in top.c
72 warnings in machine.c
5 warnings in commands.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
This changes previous behavior of calculating it at startup based on
the current max username length.
This is done because:
- it is in theory possible for the max length to change at run-time
(e.g., a new user is added after top starts running)
- on machines with many users this delays startup significantly
PR: 20799
PR: 89762
Reported by: ob@e-Gitt.NET
Reported by: wkwu@Kavalan.csie.NCTU.edu.tw
Reported on: 2000-08-23 and 2005-11-30
This is all warnings at level six (6) that are not
char-subscripts, incompatible-pointer-types,
sign-compare, switch, int-conversion,
missing-variable-declarations, cast-qual, cast-align
Some warnings that are fixed by this commit are:
shadow, strict-prototypes, missing-prototypes, pointer-arith,
unused-parameter, unused-const-variable, and several others
We've been maintaining top(1) for a long time, and the upstream
hasn't existed/been used in similarly as long. Make it clear that we own
top(1)
Tested with 'make universe'. Everything passed except MIPS which failed
for unrelated reasons. Install also tested for amd64.
Reviewed by: sbruno
No objections: imp, mmacy
Differential Revision: https://reviews.freebsd.org/D15387
handle.
Keep both pagesize and the new swap_maxpages in the static variables
to save sysctl calls.
Submitted by: ota@j.email.ne.jp
PR: 223149
MFC after: 2 weeks
Based on feedback from OpenZFS developers Matt Ahrens and George Wilson,
the calculation of the ratio no longer takes in to account overhead.
The old formula could result in reporting a negative compression ratio
This could confuse the user or give a false impression that there would be
an advantage to disabling the compressed ARC feature.
The new formula will more closely match an average of the on-disk
compression ratio, as reported by the ZFS property 'compressratio'
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
top(1) read the wrong amount of data from sysctl, uint64_t instead of
boolean_t, resulting in the stats not showing in many cases.
X-MFC-With: r315435
Sponsored by: ScaleEngine Inc.
implemented in top(1), rather than relying on K&R prototypes, which can
cause problems on targets where there are multiple incompatible calling
conventions and the compiler requires argument information to select the
correct one.
(There's a bit more to do here, since it looks like top(1) also sometimes
provides prototypes for various curses functions rather than relying on
the header file...)
Sponsored by: DARPA, AFRL
MFC after: 1 week
Provides:
amount of compressed data
logical size of compressed data (how much it would have taken uncompressed)
compression ratio (logical size : total ARC size)
Overhead (space consumed for compression headers)
Example output:
ARC: 31G Total, 18G MFU, 9067M MRU, 2236K Anon, 615M Header, 2947M Other
25G Compressed, 54G Uncompressed, 1.76:1 Ratio, 2265M Overhead
Reviewed by: jpaetzel, smh, imp, jhb (previous version)
MFC after: 2 week
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9829
Prefer ${SRCTOP}/foo over ${.CURDIR}/../../foo and ${SRCTOP}/usr.bin/foo
over ${.CURDIR}/../foo for paths in Makefiles.
Differential Revision: https://reviews.freebsd.org/D9932
Sponsored by: Netflix
Silence on: arch@ (twice)
kinfo_proc::ki_tdname is three characters shorter than
thread::td_name. Add a ki_moretdname field for these three
extra characters. Add the new field to kinfo_proc32, as well.
Update all in-tree consumers to read the new field and assemble
the full name, except for lldb's HostThreadFreeBSD.cpp, which
I will handle separately. Bump __FreeBSD_version.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D8722
process. We don't *quite* pull that number out of our backside, as
the actual number is difficult to determine without modifying the VM
system to report it, but it's still useful to get an idea of what's
going on when a machine unexpectedly starts swapping.
MFC after: 1 week
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
contrib/top/top.local.H to contrib/top/top.local.hs.
This fixes a build breakage when src is on a case-
insensitive file system -- we never properly create
top.x nor top.local.h. Change the makefile accordingly.
MFC after: 3 days
more obvious imprecision in the previous top changes.
Specifically, top uses a delta of clock_gettime() calls right after
invoking the kern.proc sysctl to fetch the process/thread list to
compute the time delta between the fetches. However, the kern.proc
sysctl handler does not run in constant time. It can spin on locks,
be preempted by an interrupt handler, etc. As a result, the time
between the gathering of stats for individual processes or threads
between subsequent kern.proc handlers can vary. If a "slow" kern.proc
run is followed by a "fast" kern.proc run, then the threads/processes
at the start of the "slow" run will have a longer time delta than the
threads/processes at the end. If the clock_gettime() time delta is
not itself skewed by preemption, then the delta may be too short for
a given thread/process resulting in a higher percent CPU than actual.
However, there is no good way to calculate the exact amount of overage,
nor to know which threads to subtract the overage from. Instead, just
punt and fix the definitely-wrong case of an individual thread having
more than 100% CPU.
Discussed with: zonk
displays after a pause, use the difference in runtime divided by the
length of the pause as the percentage of CPU used instead of the value
calculated by the kernel. In addition, when determing if a process or
thread is idle or not, treat any process or thread that has used any
runtime or performed any context switches during the interval as busy.
Note that the percent CPU is calculated as a double and stored in an
array to avoid recalculating the value multiple times in the comparison
method used to sort processes in the CPU display.
Tested by: Jamie Landeg-Jones <jamie@dyslexicfish.net>
Reviewed by: emaste (earlier version)
MFC after: 1 week
to 999.99% CPU. It still won't be aligned if you have a multithreaded
process using more than 1000% CPU (e.g. idle process on an idle 12-way
system), but 100% is a common case.
Submitted by: Jeremy Chadwick (partial)
MFC after: 1 week
in the manpage by having it display the current CPU (ki_oncpu) rather
than the previously used CPU (ki_lastcpu). ki_lastcpu is still used for
all other thread states.
Reported by: Chris Ross <cross+freebsd@distal.com>
MFC after: 1 week
cmdlengthdelta is the size of the header and we were using it to
allocate a buffer to store the command line. This would mean that
the cmdbuf could be too short. In practice this was never noticed unless
you usually run top -a. On a stock FreeBSD system you can see the
problem by running sendmail and then running top -a on a big terminal
window. In practice this doubles to size available to cmdbuf since the
header is around 65-68 bytes.
Reviewed by: adrian
usage on hosts using ZFS. The new line displays the total amount of RAM
used by the ARC along with the size of MFU, MRU, anonymous (in flight),
headers, and other (miscellaneous) sub-categories. The line is not
displayed on systems that are not using ZFS.
Reviewed by: avg, fs@
MFC after: 3 days
to the maximum number of CPUs to ensure that lcpustates[] array is always
allocated to the maximum size. Previously, if top was started without
per-CPU stats it would allocate a smaller lcpustates[] array. When
per-CPU stats were then enabled, it would overflow the array and trash
the cpustates_columns[] array causing the CPU stats to be printed in the
wrong locations.
Approved by: re (kib)
MFC after: 1 week
ki_rusage member when KERN_PROC_INC_THREAD is passed to one of the
process sysctls.
- Correctly account for the current thread's cputime in the thread when
doing the runtime fixup in calcru().
- Use TIDs as the key to lookup the previous thread to compute IO stat
deltas in IO mode in top when thread display is enabled.
Reviewed by: kib
Approved by: re (kib)
rather than at the bottom of the manpage.
- Remove an obsolete comment about SWAIT being a stale state. It was
resurrected for a different purpose in FreeBSD 5 to mark idle ithreads.
- Add a comment documenting that the SLEEP and LOCK states typically
display the name of the event being waited on with lock names being
prefixed with an asterisk and sleep event names not having a prefix.
MFC after: 1 week
idle threads). The process is displayed by default (subject to whether or
not system processes are displayed) to preserve existing behavior. The
system idle process can be hidden via the '-z' command line argument or the
'z' key while top is running. When it is hidden, top more closely matches
the behavior of FreeBSD <= 4.x where idle time was not accounted to any
process.
MFC after: 2 weeks
