Commit Graph

14 Commits

Author SHA1 Message Date
Justin Hibbits
24f4202df8 Check all compatible strings on uart devices in powerpc
Summary:
Some device trees put "fsl,ns16650" first in the compatible list.  This causes
the probe code to choke, even though the device is compatible with ns16650, and
has it listed later in the tree.

Reviewed by:	nwhitehorn
MFC after:	1 week
Differential Revision: https://reviews.freebsd.org/D7676
2016-08-28 21:31:21 +00:00
Andrew Turner
45fd186285 Allow callers of OF_decode_addr to get the size of the found mapping. This
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.

As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.

Reviewed by:	jhibbits
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5258
2016-02-16 15:18:12 +00:00
Marcel Moolenaar
359ee827e1 Do not fail the low-level device probe simply because the kernel
doesn't have support for the Z8530. Embedded PowerPC platforms
typically don't. Fail when the device class we actually need is
not present.

Obtained from:	Juniper Networks, Inc.
2014-07-26 17:49:40 +00:00
Nathan Whitehorn
02ef3f33de Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use
the right type.
2013-12-01 19:05:32 +00:00
Nathan Whitehorn
49aba28afe Make uart_cpu_powerpc work on both FDT and OFW systems. This is the last
remaining modification required to build kernels that work with both on
PowerPC.
2013-12-01 16:02:22 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Nathan Whitehorn
ccf6415e82 Fix serial console on Apple Xserve G5 by falling back to input-device-1
if input-device is unavailable. The Xserve G5 defaults to using
screen/keyboard for output-device/input-device even if these are not
installed, and then falls back to serial ports at boot time.

Reviewed by:	marcel
Hardware from:	grehan
Approved by:	re (kib)
2009-07-23 12:51:27 +00:00
Marcel Moolenaar
39bc3bff94 Don't use pmap_kextact() when comparing bus handles for Book-E.
We typically wire translation to devices with TLB1 entries and
pmap_kextract() does not know about those and returns 0.  This
causes false positives (read: all serial ports suddenly become
the console).
2009-04-08 22:19:39 +00:00
Nathan Whitehorn
1c96bdd146 Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode
provided, for example, on the PowerPC 970 (G5), as well as on related CPUs
like the POWER3 and POWER4.

This also adds support for various built-in hardware found on Apple G5
hardware (e.g. the IBM CPC925 northbridge).

Reviewed by:    grehan
2009-04-04 00:22:44 +00:00
Rafal Jaworowski
6b7ba54456 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00
Marcel Moolenaar
de2fa7b8af Redefine bus_space_tag_t on PowerPC from a 32-bit integral to
a pointer to struct bus_space. The structure contains function
pointers that do the actual bus space access.

The reason for this change is that previously all bus space
accesses were little endian (i.e. had an explicit byte-swap
for multi-byte accesses), because all busses on Macs are little
endian.
The upcoming support for Book E, and in particular the E500
core, requires support for big-endian busses because all
embedded peripherals are in the native byte-order.

With this change, there's no distinction between I/O port
space and memory mapped I/O. PowerPC doesn't have I/O port
space. Busses assign tags based on the byte-order only.
For that purpose, two global structures exist (bs_be_tag and
bs_le_tag), of which the address can be taken to get a valid
tag.

Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
Marcel Moolenaar
f8100ce2a7 Don't expose the uart_ops structure directly, but instead have
it obtained through the uart_class structure. This allows us
to declare the uart_class structure as weak and as such allows
us to reference it even when it's not compiled-in.
It also allows is to get the uart_ops structure by name, which
makes it possible to implement the dt tag handling in uart_getenv().
The side-effect of all this is that we're using the uart_class
structure more consistently which means that we now also have
access to the size of the bus space block needed by the hardware
when we map the bus space, eliminating any hardcoding.
2007-04-02 22:00:22 +00:00
Marcel Moolenaar
e997db5d3a Implement uart_cpu_eqres() and uart_cpu_getdev(). This allows
FreeBSD to use a serial console, as per the OFW settings.
2006-07-26 17:17:23 +00:00
Marcel Moolenaar
ce8f00136f Allow uart(4) to be built on PowerPC. 2006-03-31 01:42:55 +00:00