The alias needs to be part of the provider instead of the geom to work
properly. To bind the DEV geom, we need to look at the provider's names and
aliases and create the dev entries from there. If this lives in the GEOM, then
it won't propigate down the tree properly. Remove it from geom, add it provider.
Update geli, gmountver, gnop, gpart, and guzip to use it, which handles the bulk
of the uses in FreeBSD. I think this is all the providers that create a new name
based on their parent's name.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
Change the "count_until_fail" option of gnop, now it enables the failing
rating instead of setting them to 100%.
The original patch introduced the new flag, which sets the fail/rate to 100%
after N requests. In some cases, we don't want to have 100% of failure
probabilities. We want to start failing at some point.
For example, on the early stage, we may like to allow some read/writes requests
before having some requests delayed - when we try to mount the partition,
or when we are trying to import the pool.
Another case may be to check how scrub in ZFS will behave on different stages.
This allows us to cover more cases.
The previous behavior still may be configured.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22632
Thanks to this option we can create more then one gnop provider from
single provider. This may be useful for temporary labeling some data
on the disk.
Reviewed by: markj, allanjude, bcr
Differential Revision: https://reviews.freebsd.org/D22304
filling in the same defaults that the current userland module uses.
This allows an old geom_nop.so userland module to work with a new kernel.
Approved by: imp (mentor)
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21972
I/O requests after the given number have been allowed though.
Approved by: imp (mentor)
Reviewed by: rpokala kib 0mp mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21593
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
This allows to simulated disk that is responding slowly to the IO requests.
Reviewed by: markj, bcr, pjd (previous version)
Differential Revision: https://reviews.freebsd.org/D21052
operations already in its queue were not being properly drained.
The GEOM framework does the queue draining, but the module needs
to wait for the draining to happen. The waiting is done by adding
a g_nop_providergone() function to wait for the I/O operations to
finish up. This change is similar to change -r345758 made to the
memory-disk driver.
Submitted by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 1 week
Sponsored by: Netflix
GEOM's stripeoffset overflows at 4 gigabyte margin (2^32)
because of its u_int type. This leads to incorrect data in the output
generated by "sysctl kern.geom.confxml" command, "graid list" etc.
when GEOM array has volumes larger than 4G, for example.
This change does not affect ABI but changes KBI. No MFC planned.
Differential Revision: https://reviews.freebsd.org/D13426
GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.
This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.
MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.
Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
reads and writes.
PR: kern/198405
Submitted by: Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3679
it possible to "simulate" 4K media, to eg test alignment handling.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3664
When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.
The defined now safety requirements are:
- caller should not hold any locks and should be reenterable;
- callee should not depend on GEOM dual-threaded concurency semantics;
- on the way down, if request is unmapped while callee doesn't support it,
the context should be sleepable;
- kernel thread stack usage should be below 50%.
To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
- G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
- G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
- G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
- G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe. If any of requirements are not met, request is queued to
g_up or g_down thread same as before.
Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).
To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.
This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).
Sponsored by: iXsystems, Inc.
MFC after: 2 months
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
- number of read I/O requests,
- number of write I/O requests,
- number of read bytes,
- number of written bytes.
Add 'reset' subcommand for resetting statistics.
set gp->softc to NULL and return ENXIO when it is NULL, so GEOM
will not panic or hang, but unload one device on every 'unload'.
This make 'unload' command usable, but it have to be executed
<number of devices> + 1 times.
- Made use of 'pp' variable.
provider.
- Bump version number.
This allows for a quite interesting trick. One can setup a stripe with
stripe size of 512 bytes and create transparent provider on top of it
with sector size equal to <ndisks> * 512. The result will be something
like RAID3 without parity disk (every access will touch all disks).
