- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
Using -B already sets .MAKE.MODE=compat but it was leaving
MK_META_MODE set which could still cause other MK_META_MODE==yes
checks to trigger.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
Using buildworld, installworld, buildworld. It is expected that nothing
should rebuild. However any host tool used could have its timestamp
updated. Any library used by dynamic tools could have its timestamp
updated. The filemon(4) data in the .meta files captures all reads to
these files. This causes the 2nd buildworld to rebuild everything since
host tools and files have been updated.
Because the build is self-reliant and bootstraps itself, it should be
safe to ignore mtime changes on host files used during the build. Host
files should only impact the build of legacy, build-tools, bootstrap-tools,
cross-tools, but those are already intended to be reproducible from its
own bootstrapping. It is possible in a rare case that a bug in a host
file does produce a broken build tool. If that happens it will just
have to be communicated properly.
An alternative solution would be to update the mtime of all files in the
object directory after installworld so that the host files are not newer
than the object files. That also requires special care for read-only
obj directories and special care to not mess with any intended timestamps in
the build, such as done for reproducibility.
Reported by: many
Sponsored by: EMC / Isilon Storage Division
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
Since META_MODE is being sold and used as a working incremental build, it won't
make much sense if filemon data is excluded. There is no way to recover
from that in a subsequent build.
Sponsored by: EMC / Isilon Storage Division
Adding .META to targets-to-build will ensure that they will rebuild if there
is no .meta file.
Adding it to all SUFFIXES and objects ensures that at least objects will
rebuild if there is no .meta file.
This will be reverted if bmake's behavior changes to rebuild on missing .meta
files.
Sponsored by: EMC / Isilon Storage Division
It turns out we need to leave this in place for a while so that people
running self-hosting armv6hf systems can do the builds necessary to update
to armv6 (which is now hardfloat by default).
This will ensure that the variable was not set as a make override, in
make.conf, src.conf or src-env.conf. It allows setting the value in
src-env.conf when using WITH_AUTO_OBJ since that case properly handles
changing .OBJDIR (except if MAKEOBJDIRPREFIX does not yet exist which is
being discussed to be changed).
This change allows setting a default MAKEOBJDIRPREFIX via local.sys.env.mk.
Sponsored by: EMC / Isilon Storage Division
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
This has caused much confusion for myself as there are quite a lot of
variables that depend on having a proper ${.OBJDIR}.
Sponsored by: EMC / Isilon Storage Division
This allows most of the build to simply consider MK_META_MODE
Update to latest dirdeps.mk so we can do:
make -f dirdeps.mk bin/cat.i386
Reviewed by: bdrewery
This allows META_FILES option to be renamed META_MODE.
Also add META_COOKIE_TOUCH for use in targets that can benefit
from a cookie when in meta mode.
Differential Revision: https://reviews.freebsd.org/D4153
Reviewed by: bdrewery
ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not
used to achieve a safe pseudo-incremental build. This is explained in
more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the
cache, but with a full cache saves 30-50% in build times. When combined with
the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the
resulting dependency file, which it does not do when using mkdep(1)/'CC
-E'. Stats are provided at the end of this message.
This removes the need to modify /etc/make.conf with the CC:= and CXX:=
lines which conflicted with external compiler support [3] (causing the
bootstrap compiler to not be built which lead to obscure failures [4]),
incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid
Clang errors with parenthesis, and did not work with META_MODE.
The option name was picked to match the existing option in ports. This
feature is available for both in-src and out-of-src builds that use
/usr/share/mk.
Linking, assembly compiles, and pre-processing avoid using ccache since it is
only overhead. ccache does nothing special in these modes, although there is
no harm in calling it for them.
CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap
compiler to hash the content of the compiler binary to determine if it
should be a cache miss. For external compilers the 'mtime' option is used
as it is more efficient and likely to be correct. Future work may optimize the
'content' check using the same checks as whether a bootstrap compiler is needed
to be built.
The CCACHE_CPP2 pessimization is currently default in our devel/ccache
port due to Clang requiring it. Clang's -Wparentheses-equality,
-Wtautological-compare, and -Wself-assign warnings do not mix well with
compiling already-pre-processed code that may have expanded macros that
trigger the warnings. GCC has so far not had this issue so it is allowed to
disable the CCACHE_CPP2 default in our port.
Sharing a cache between multiple checkouts, or systems, is explained in
the ccache manual. Sharing a cache over NFS would likely not be worth
it, but syncing cache directories between systems may be useful for an
organization. There is also a memcached backend available [5]. Due to using
an object directory outside of the source directory though you will need to
ensure that both are in the same prefix and all users use the same layout. A
possible working layout is as follows:
Source: /some/prefix/src1
Source: /some/prefix/src2
Source: /some/prefix/src3
Objdir: /some/prefix/obj
Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj'
This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace
all absolute paths to be relative. Using something like this is required due
to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache
adds into its hash for the object without CCACHE_BASEDIR.
distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc.
I have not personally tested this and assume it will not mix well with
using the bootstrap compiler.
The cache from buildworld can be reused in a subdir by first running
'make buildenv' (from r290424).
Note that the cache is currently different depending on whether -j is
used or not due to ccache enabling -fdiagnostics-color automatically if
stderr is a TTY, which bmake only does if not using -j.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files and ccache objects.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
The WITH_FAST_DEPEND feature was used for comparison here as well to show
the dramatic time savings with a full cache.
buildworld:
x buildworld-before
+ buildworld-ccache-empty
* buildworld-ccache-full
% buildworld-ccache-full-fastdep
# buildworld-fastdep
+-------------------------------------------------------------------------------+
|% * # +|
|% * # +|
|% * # xxx +|
| |A |
| A|
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 4519 4525.04 4520.73 4521.59 3.1104823
Difference at 95.0% confidence
758.027 +/- 43.4565
20.1412% +/- 1.15466%
(Student's t, pooled s = 19.1726)
* 3 1823.08 1827.2 1825.62 1825.3 2.0785572
Difference at 95.0% confidence
-1938.26 +/- 43.298
-51.5007% +/- 1.15045%
(Student's t, pooled s = 19.1026)
% 3 1266.96 1279.37 1270.47 1272.2667 6.3971113
Difference at 95.0% confidence
-2491.3 +/- 44.3704
-66.1952% +/- 1.17895%
(Student's t, pooled s = 19.5758)
# 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-ccache-empty
* buildkernel-ccache-empty-fastdep
% buildkernel-ccache-full
# buildkernel-ccache-full-fastdep
@ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|# @ % * |
|# @ % * x + |
|# @ % * xx ++|
| MA |
| MA|
| A |
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 727.97 731.91 728.06 729.31333 2.2492295
Difference at 95.0% confidence
156.88 +/- 4.17129
27.4058% +/- 0.728695%
(Student's t, pooled s = 1.84034)
* 3 527.1 528.29 528.08 527.82333 0.63516402
Difference at 95.0% confidence
-44.61 +/- 2.33254
-7.79305% +/- 0.407478%
(Student's t, pooled s = 1.02909)
% 3 400.4 401.05 400.62 400.69 0.3306055
Difference at 95.0% confidence
-171.743 +/- 2.16453
-30.0023% +/- 0.378128%
(Student's t, pooled s = 0.954969)
# 3 201.94 203.34 202.28 202.52 0.73020545
Difference at 95.0% confidence
-369.913 +/- 2.40293
-64.6212% +/- 0.419774%
(Student's t, pooled s = 1.06015)
@ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
[1] https://ccache.samba.org/performance.html
[2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html
[3] https://reviews.freebsd.org/D3484
[5] https://github.com/jrosdahl/ccache/pull/30
PR: 182944 [4]
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Relnotes: yes
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
This is a NOP as r254419 enabled this by default in bmake. Add it here though
to ensure it is known that we are using this as a default and in case a
bmake import removes the default we have.
This tells bmake to always pass job tokens into sub-commands. Otherwise
it would only do so if the target being built depended on the special
.MAKE target (which causes _all_ commands to be executed with -n as well)
or if the command matches '${MAKE}/${.MAKE}/$(MAKE)/$(.MAKE)/make' (before
expansion, so ${LIB32WMAKE} would not qualify). Using '+' on a command
(which runs the command with -n) would not pass the job token even though it
is a documented way to achieve the .MAKE effect on a command.
Sponsored by: EMC / Isilon Storage Division
When inspecting this value it is more expected to have it show the
automatically-created directory value rather than CURDIR.
Sponsored by: EMC / Isilon Storage Division
r284708 addressed this slightly but seems to have put the make(showconfig)
guard in the wrong place. Rather than guard setting the default obj directory,
guard inclusion of auto.obj.mk. This avoids creating SRCTOP/obj and
SRCTOP/release/obj when running makeman.
Sponsored by: EMC / Isilon Storage Division
As the name indicates, these are flags to pass to nm(1). The newer
binutils have a plugin mechanism so, to build something with LLVM's
LTO, we need to pass flags to nm(1). This commit also extends
lorder(1) to pass NMFLAGS to nm(1).
This means moving include of local.sys.mk and src.sys.mk too.
Introduce new includes to take the early slot, for the purpose
of being able to influence toolchains and the like.
Differential Revision: D2860
Reviewed by: imp
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
Also use __DEFAULT_DEPENDENT_OPTIONS for options that
generally depend on META_MODE.
Deal with MK_META_MODE and MK_AUTO_OBJ directly.
Also allow MK_META_FILES if no -B
this is very handy for getting meta files from say buildworld
to dtrace(1) invocations during a build. This change includes -C in the
default flags, which has dtrace(1) run input scripts through the
preprocessor. While here, sort the definitions of CP and CPP in sys.mk.
Differential Revision: https://reviews.freebsd.org/D2204
Reviewed by: imp, rpaulo (previous revision)
which includes more than one file with the same name, in different
directories.
For example, setting:
SRCS+= foo/foo.c bar/foo.c baz/foo.c
will now create separate objdirs 'foo', 'bar' and 'baz' for each of the
sources in the list, and use those objdirs for the corresponding object
files.
Reviewed by: brooks, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D1984
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
