Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The end of the loop must re-lookup the next buf since the bufobj lock
is dropped in the loop body. If the lookup fails, the loop is restarted.
This mechanism non-obviously also terminates the loop when the end of
the buf list is reached. Split up the two loops termination cases to
make the code a bit less fragile. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12730
MNT_VNODE_FOREACH_ALL() is supposed to avoid returning doomed vnodes,
but the VI_DOOMED check it used was done without the vnode interlock
held, so it could race with a concurrent vgone().
Submitted by: Don Morris <don.morris@isilon.com>
Reviewed by: kib, mckusick
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12704
One consequence of the patch is that msyncing unlinked file mappings
no longer reduces the amount of the dirty memory in the system, but I
do not think that there are users of msync(2) that utilize it for such
side-effect.
Reported and tested by: tjil
PR: 222356
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12411
The old code allowed calling vdrop() before insmntque() to place the vnode back
onto the freelist for later recycling. Some downstream consumers may rely on
this support. Normally insmntque() failing is fine since is uses vgone() and
immediately frees the vnode rather than attempting to add it to the freelist if
vdrop() were used instead.
Also assert that vhold() cannot be used on such a vnode.
Reviewed by: kib, cem, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12126
This mode allows other clean buffers to arrive while we flush the buf
lists for the vnode, which is fine for the targeted use. We only need
that all buffers existed at the time of the function start were
flushed. In fact, only one assert has to be relaxed.
In collaboration with: pho
Reviewed by: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12083
Previously, when the VI_TRYLOCK failed, we would spin under the mutex
that protects the vnode active list until we either succeeded or
noticed that we had hogged the CPU. Since we were violating the lock
order, this would guarantee that we would become a hog under any
deadlock condition (e.g. a race with vdrop(9) on the same vnode). In
the presence of many concurrent threads in sync(2) or vdrop etc, the
victim could hang for a long time.
Now, avoid spinning by dropping and reacquiring the locks in the
conventional lock order when the trylock fails. This requires a dance
with the vnode hold count.
Submitted by: Tom Rix <trix@juniper.net>
Tested by: pho
Differential revision: https://reviews.freebsd.org/D10692
was issued during VM-initiated i/o (pageout), so that the function
does not try to flush or remove pages or wait for the vm object
paging-in-progress counter.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D10241
Don't zero unused pointer members again.
Per discussion with secteam we are not issuing an advisory for this
issue as we have no current evidence it leaks exploitable information.
Reviewed by: rwatson, glebius, delphij
MFC after: 1 day
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10227
This allows blind increment of relevant counters which under contention
is cheaper than inc-not-zero loops at least on amd64.
Use it in some of the places which are guaranteed to see already active
vnodes.
Reviewed by: kib (previous version)
As of r234483, vnode deactivation causes non-VPO_NOSYNC pages to be
laundered. This behaviour has two problems:
1. Dirty VPO_NOSYNC pages must be laundered before the vnode can be
reclaimed, and this work may be unfairly deferred to the vnlru process
or an unrelated application when the system is under vnode pressure.
2. Deactivation of a vnode with dirty VPO_NOSYNC pages requires a scan of
the corresponding VM object's memq for non-VPO_NOSYNC dirty pages; if
the laundry thread needs to launder pages from an unreferenced such
vnode, it will reactivate and deactivate the vnode with each laundering,
potentially resulting in a large number of expensive scans.
Therefore, ensure that all dirty pages are laundered upon deactivation,
i.e., when all maps of the vnode are removed and all references are
released.
Reviewed by: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8641
Previously free vnodes would always by directly returned to the global
LRU list. With this change up to mnt_free_list_batch vnodes are collected
first.
syncer runs always return the batch regardless of its size.
While vnodes on per-mnt lists are not counted as free, they can be
returned in case of vnode shortage.
Reviewed by: kib
Tested by: pho
if vnode is VMIO. For VMIO vnodes, set BO_DEAD in vm_object_terminate().
The vnode_destroy_object(), when calling into vm_object_terminate(),
must be able to flush buffers. BO_DEAD purpose is to quickly destroy
buffers on write when the underlying vnode is not operable any more
(one example is the devfs node after geom is gone). Setting BO_DEAD
for reclaiming vnode before object is terminated is premature, and
results in unability to flush buffers with live SU dependencies from
vinvalbuf() in vm_object_terminate().
Reported by: David Cross <dcrosstech@gmail.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
does it under the vnode interlock, but the interlock is not owned by the
asserting thread. As result, we might read increased use counter but also
still see VI_OWEINACT.
In collaboration with: nwhitehorn
Hardware donated by: IBM LTC
Sponsored by: The FreeBSD Foundation (kib)
Approved by: re (gjb)
to mount points with the given filesystem type, specified by mount
vfs_ops pointer.
Based on patch by: mckusick
Reviewed by: avg, mckusick
Tested by: allanjude, madpilot
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
It seems that at present vfs_read_dirent() is used only with filesystems
that do not support cookies, so the bug never manifested itself.
MFC after: 1 week
While there, order EVFILT_VNODE notes descriptions alphabetically.
Based on submission, and tested by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 2 weeks
the monitored directory as the result of rename(2) operation. The
renames staying in the directory are not reported.
Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 2 weeks
rename removing or adding subdirectory entry.
Discussed with and tested by: Vladimir Kondratyev <wulf@cicgroup.ru>
NetBSD PR: 48958 (http://gnats.netbsd.org/48958)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
the virtvnodes calculation. Include the size of fs-specific v_data as
the nfs nclnode inline, the NFS nclnode is bigger than either ZFS
znode or UFS inode. Include the size of namecache_ts and short cache
path element, multiplied by the name cache population factor, again
inline.
Inline defines are used to avoid pollution of the vnode.h with the
subsystem-private objects. Non-significant unsynchronized changes of
the definitions are fine, we do not care about that precision, and
e.g. ZFS consumes much malloced memory per vnode for reasons
unaccounted in the formula.
Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10.
The measures reduce vnode cache pressure on kmem and bring the vnode
cache memory use below some apparent thresholds that were exceeded by
r291244 due to more robust vnode reuse.
Reported and tested by: marius (i386, previous version)
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
numbers range.
This effectively skips indirect and extdata blocks on the buffer
queue. Since their logical block numbers are negative, bnoreuselist()
could loop infinitely.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This API has no in-tree consumers at the moment but is useful to at least
one out-of-tree consumer, and naturally complements existing vnode refcount
functions (vholdl(9), vdropl(9)).
Obtained from: kib (sys/ portion)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4947
Differential Revision: https://reviews.freebsd.org/D4953
Advance the logical block number to the lblkno of the found block plus
one, instead of incrementing the block number which was used for
lookup. This change skips sparcely populated buffer ranges, similar
to r292325, instead of doing useless lookups.
Do not restart the bnoreuselist() from the start of the range if
buffer lock cannot be obtained without sleep. Only retry lookup and
lock for the same queue and same logical block number.
Reported by: benno
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
buffer for each block number in the range with gbincore(), look up the
next instantiated buffer with the logical block number which is
greater or equal to the next lblkno. This significantly speeds up the
iteration for sparce-populated range.
Move the iteration into new helper bnoreuselist(), which is structured
similarly to flushbuflist().
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
the type stability of the buffers memory. Instead of memoizing
pointer to the next buffer and validating it, remember the next
logical block number in the bo list and re-lookup.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
For completeness add a VNASSERT that there are no threads waiting on a
range lock (this was previously checked on every vnode free).
Reported by; Rick Macklem
Fix from: Mateusz Guzik
PR: 204949
on every allocation and fully releases them on every free. These
are not trivial costs: it starts by zeroing a large structure then
initializes a mutex, a lock manager lock, an rw lock, four lists,
and six pointers. And looking at vfs.vnodes_created, these operations
are being done millions of times an hour on a busy machine.
As a performance optimization, this code update uses the uma_init
and uma_fini routines to do these initializations and cleanups only
as the vnodes enter and leave the vnode_zone. With this change the
initializations are only done kern.maxvnodes times at system startup
and then only rarely again. The frees are done only if the vnode_zone
shrinks which never happens in practice. For those curious about the
avoided work, look at the vnode_init() and vnode_fini() functions in
kern/vfs_subr.c to see the code that has been removed from the main
vnode allocation/free path.
Reviewed by: kib
Tested by: Peter Holm
active list, into the header comment for vdrop(), which is the
function that decides whether to leave the vnode on the list. Note
that dirty page write-out in vinactive() is asynchronous.
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
targets. See the comment above wantfreevnodes variable for the
description of the algorithm.
The vfs.vlru_alloc_cache_src sysctl is removed. New code frees
namecache sources as the last chance to satisfy the highest watermark,
instead of selecting the source vnodes randomly. This provides good
enough behaviour to keep vn_fullpath() working in most situations.
The filesystem layout with deep trees, where the removed knob was
required, is thus handled automatically.
Submitted by: bde
Discussed with: mckusick
Tested by: pho
MFC after: 1 month
In poll mode, check for and wake VBAD vnodes. (Vnodes that are VBAD at
registration will never be woken by the RECLAIM trigger.)
Add post-VOP_RECLAIM hook to trigger notes on vnode reclamation. (Vnodes that
were fine at registration but are vgoned while being monitored should signal
waiters.)
Reviewed by: kib
Approved by: markj (mentor)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3675
the size of the name cache hash table (mapping file names to vnodes)
and the vnode hash table (mapping mount point and inode number to vnode).
An appropriate locking strategy is the key to changing hash table sizes
while they are in active use.
Reviewed by: kib
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D2265
MFC after: 2 weeks
reason this didn't result in an unclean shutdown is that devfs ignores
MNT_FORCE flag.
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3467
It looks like EVFILT_READ and EVFILT_WRITE trigger under the same
conditions as poll()'s POLLRDNORM and POLLWRNORM as described by POSIX.
The only difference is that POLLRDNORM has to be triggered on regular
files unconditionally, whereas EVFILT_READ only triggers when not EOF.
Introduce a new flag, NOTE_FILE_POLL, that can be used to make
EVFILT_READ and EVFILT_WRITE behave identically to poll(). This flag
will be used by cloudlibc's poll() function.
Reviewed by: jmg
Differential Revision: https://reviews.freebsd.org/D3303
Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free
list) of either counter are still guarded with vnode interlock.
Reviewed by: kib (earlier version)
Tested by: pho
Previously vputx would detect the condition and clear the flag.
With this change it is invalid to have both v_usecount > 0 and the flag
set. Assert the condition is met in all revlevant places.
Reviewed by: kib
objects, i.e. for buffer objects which vnode was reclaimed. Buffer
cache cannot write such buffers. Return the error and discard the
buffer immediately on write attempt.
BO_DIRTY now always set during vnode reclamation, since it is used not
only for the INVARIANTS checks. Do allow placement of the clean
buffers on dead bufobj list, otherwise filesystems cannot use bufcache
at all after the devvp reclaim.
Reported and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the active vnode list for the given mount point, with the assumption
that vnodes with dirty pages are active. This is enforced by
vinactive() doing vm_object_page_clean() pass over the vnode pages.
The issue is, if vinactive() cannot be called during vput() due to the
vnode being only shared-locked, we might end up with the dirty pages
for the vnode on the free list. Such vnode is invisible to syncer,
and pages are only cleaned on the vnode reactivation. In other words,
the race results in the broken guarantee that user data, written
through the mmap(2), is written to the disk not later than in 30
seconds after the write.
Fix this by keeping the vnode which is freed but still owing
inactivation, on the active list. When syncer loops find such vnode,
it is deactivated and cleaned by the final vput() call.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Nothing stops a parallel unmount to suceed before the given call to
dounmount() checks and locks the covered vnode. Prevent dounmount()
from acting on the freed (although type-stable) memory by changing the
interface to require the mount point to be referenced. dounmount()
consumes the reference on return, regardless of the sucessfull or
erronous result.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
use VOP_FSYNC() to perform the NFS server's Commit operation.
This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which
is set by file systems that use the buffer cache. If this flag
is not set, the NFS server always does a VOP_FSYNC().
This should be ok for old file system modules that do not set
MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although
it might not be optimal for file systems that use the buffer cache.
Reviewed by: kib
MFC after: 2 weeks
prevent errors from yanking devices out from under filesystems. Only
care about special vnodes on devfs, special nodes on other kinds of
filesystems do not have special properties.
Sponsored by: EMC / Isilon Storage Division
Submitted by: Conrad Meyer
MFC after: 1 week
- vfs.recycles counts the number of vnodes forcefully recycled to avoid
exceeding kern.maxvnodes.
- vfs.vnodes_created counts the number of vnodes created by successful
calls to getnewvnode().
Differential Revision: https://reviews.freebsd.org/D1671
Reviewed by: kib
MFC after: 1 week
creating delayed write buffers belonging to the reclaimed vnode. Put
the buffer cleanup code after inactivation.
Add asserts that ensure that buffer queues are empty and add BO_DEAD
flag for bufobj to check that no buffers are added after the cleanup.
BO_DEAD is only used by INVARIANTS-enabled kernels.
Reported and tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
to be called before suspension and after resume, correspondingly. The
syncer_suspend() ensures that all filesystems dirty data and metadata
are saved to the permanent storage, and stops kernel threads which
might modify filesystems. The syncer_resume() restores stopped
threads.
For now, only syncer is stopped. This is needed, because each sync
loop causes superblock updates for UFS.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some watchdog drivers (like ipmi) need to sleep while patting the watchdog.
See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK).
Submitted by: asomers
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 637548 on 2012/10/04
It could be claimed that two things were reasonable protected by
Giant. One is vfsconf list links, which is converted to the new
dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is
now updated with atomics.
Note that vfc_refcount still has the same races now as it has under
the Giant, the unload of filesystem modules can happen while the
module is still in use.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
some parts of the checks are in fact redundand in the surrounding
code, and it is more clear what the conditions are by direct testing
of the flags. Two of the three macros were only used in assertions.
In vnlru_free(), all relevant parts of vholdl() were already inlined,
except the increment of v_holdcnt itself. Do not call vholdl() to do
the increment as well, this allows to make assertions in
vholdl()/vhold() more strict.
In v_incr_usecount(), call vholdl() before incrementing other ref
counters. The change is no-op, but it makes less surprising to see
the vnode state in debugger if interrupted inside v_incr_usecount().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while
traversing through the list of mount points.
This change significantly improves NFS server scalability, since it had
to do this translation for every request, and the global lock becomes quite
congested.
This code is more optimized for relatively small number of mount points.
On systems with hundreds of active mount points this simple cache may have
many collisions. But the original traversal code in that case should also
behave much worse, so we are not loosing much.
Reviewed by: attilio
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(),
that reduces number of global vnode_free_list_mtx mutex acquisitions
from 4 to 2 per NFS request on ZFS, improving SMP scalability.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Assert that the hold count has not fallen below the use count, a situation
that would only happen when a vref() (or similar) is erroneously paired
with a vdrop(). This situation has not been observed in the wild, but
could be helpful for someone implementing a new filesystem.
Reviewed by: kib
Approved by: hrs (mentor)
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
really belong to it. Such vnodes, with the pointers to other vnodes
v_objects, are typically instantiated by the bypass filesystems.
Invalidating mappings of other vnode pages and the pages is wrong,
since reclamation of the upper vnode does not imply that lower vnode
is reclaimed too.
One of the consequences of the improper reclamation was destruction of
the wired mappings of the lower vnode pages, triggering miscellaneous
assertions in the VM system.
Reported by: John Marshall <john.marshall@riverwillow.com.au>
Tested by: John Marshall <john.marshall@riverwillow.com.au>, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
with the vnode shared-locked. If upgrade succeeded, the inactivation
can be done immediately, instead of being postponed.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (glebius)
Otherwise, knote keeps a pointer to a vnode which could become invalid
any time.
Reported by: many
Tested by: Patrick Lamaiziere <patfbsd@davenulle.org>
Discussed with: jmg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (marius)
must be destroyed, knlist_clear() and seldrain() calls could be
avoided, since vpollinfo was not used. More, the knlist_clear()
calling protocol requires the knlist locked, which is not true at the
call site.
Split the destruction into the helper destroy_vpollinfo_free(), and
call it when raced, instead of destroy_vpollinfo().
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
the vnode lock while iterating over the free vnode list. Instead of
yielding, pause for 1 tick. The change is reported to help in some
virtualized environments.
Submitted by: Roger Pau Monn? <roger.pau@citrix.com>
Discussed with: jilles
Tested by: pho
MFC after: 2 weeks
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
with any structure containing a uint64_t index. The tree code
auto-generates type safe wrappers.
- Eliminate the buf splay and replace it with pctrie. This is not only
significantly faster with large files but also allows for the possibility
of shared locking.
Reviewed by: alc, attilio
Sponsored by: EMC / Isilon Storage Division
null_hashget() obtains the reference on the nullfs vnode, which must
be dropped.
- Fix a wart which existed from the introduction of the nullfs
caching, do not unlock lower vnode in the nullfs_reclaim_lowervp().
It should be innocent, but now it is also formally safe. Inform the
nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on
nullfs inode.
- Add a callback to the upper filesystems for the lower vnode
unlinking. When inactivating a nullfs vnode, check if the lower
vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC
on the lower vnode, and reclaim upper vnode if so. This allows
nullfs to purge cached vnodes for the unlinked lower vnode, avoiding
excessive caching.
Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
locks. To support this, VNODE locks are created with the LK_IS_VNODE
flag. This flag is propagated down using the LO_IS_VNODE flag.
Note that WITNESS still records the LOR. Only the printing and the
optional entering into the kernel debugger is bypassed with the
WITNESS_NO_VNODE option.
LK_EXCLOTHER. LK_EXCLOTHER is only used to acquire a
usecount on a vnode during NFSv4 recovery from an
expired lease.
Reported and tested by: pho
MFC after: 2 weeks
- Don't insert BKGRDMARKER bufs into the splay or dirty/clean buf lists.
No consumers need to find them there and it complicates the tree.
These flags are all FFS specific and could be moved out of the buf
cache.
- Use pbgetvp() and pbrelvp() to associate the background and journal
bufs with the vp. Not only is this much cheaper it makes more sense
for these transient bufs.
- Fix the assertions in pbget* and pbrel*. It's not safe to check list
pointers which were never initialized. Use the BX flags instead. We
also check B_PAGING in reassignbuf() so this should cover all cases.
Discussed with: kib, mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
Set the v_hash for a new vnode in the getnewvnode() to the value
calculated based on the vnode structure address. Filesystems using
vfs_hash_insert() override the v_hash using the standard formula of
(inode_number + mnt_hashseed). For other filesystems, the
initialization allows the vfs_hash_index() to provide useful hash too.
Suggested, reviewed and tested by: peter
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
case. There is no point in optimizing further the code and use a TRUE
litteral for a path that does heavyweight stuff anyway (like lock acq),
at the price of obfuscated code.
Use the appropriate check where necessary and remove a macro.
Sponsored by: EMC / Isilon storage division
MFC after: 3 days
When kern_yield() was introduced with the possibility to specify
a new priority, the behaviour changed by not lowering priority at all
in the consumers, making the yielding mechanism highly ineffective for
high priority kthreads like bufdaemon, syncer, vlrudaemon, etc.
There are no evidences that consumers could bear with such change in
semantic and this situation could finally lead to bugs similar to the
ones fixed in r244240.
Re-specify userland pri for kthreads involved.
Tested by: pho
Reviewed by: kib, mdf
MFC after: 1 week
yields, specify the user priority for the yield. Otherwise, a
higher-priority (kernel) thread could fall into the priority-inversion
with the thread owning the mutex lock.
On single-processor machines or UP kernels, do not loop adaptively
when the next vnode cannot be locked, instead yield unconditionally.
Restructure the iteration initializer and the iterator to remove code
duplication. Put the code to fetch and lock a vnode next to the
current marker, into the mnt_vnode_next_active() function, and use it
instead of repeating the loop.
Reported by: hrs, rmacklem
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
kern_yield() is problematic than.
The owned mutex is the mount interlock, and it is in fact not needed
to guarantee the stability of the mount list of active vnodes, so fix
the the issue by only taking the mount interlock for MNT_REF and
MNT_REL operations.
While there, augment the unconditional yield by some amount of
spinning [1].
Reported and tested by: pho
Reviewed by: attilio
Submitted by: attilio [1]
MFC after: 3 days
over the active list. The mount interlock is not enough to guarantee
the validity of the tailq link pointers. The __mnt_vnode_next_active()
and __mnt_vnode_first_active() active lists iterators helper functions
did not provided the neccessary stability for the list, allowing the
iterators to pick garbage.
This was uncovered after the r243599 made the active list iterators
non-nop.
Since a vnode interlock is before the vnode_free_list_mtx, obtain the
vnode ilock in the non-blocking manner when under vnode_free_list_mtx,
and restart iteration after the yield if the lock attempt failed.
Assert that a vnode found on the list is active, and assert that the
helpers return the vnode with interlock owned.
Reported and tested by: pho
MFC after: 1 week
then:
- assume the lock is held in exclusive mode and remove a moot check
about the lock acquisition.
- in the destructor remove !MPSAFE specific chunk.
Reviewed by: kib
MFC after: 2 weeks
Also remove the checks from vop_lookup_pre and vop_lookup_post, which
are now completely redundant (before this change they were partially
redundant).
Discussed with: kib
MFC after: 10 days
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
counter, without actually allocating the vnodes. The supposed use of
the getnewvnode_reserve(9) is to reclaim enough free vnodes while the
code still does not hold any resources that might be needed during the
reclamation, and to consume the slack later for getnewvnode() calls
made from the innards. After the critical block is finished, the
caller shall free any reserve left, by getnewvnode_drop_reserve(9).
Reviewed by: avg
Tested by: pho
MFC after: 1 week
trap checks (eg. printtrap()).
Generally this check is not needed anymore, as there is not a legitimate
case where curthread != NULL, after pcpu 0 area has been properly
initialized.
Reviewed by: bde, jhb
MFC after: 1 week
about vnode reclamation. Typical use is for the bypass mounts like
nullfs to get a notification about lower vnode going away.
Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument
lowervp which is reclaimed. It is possible to register several
reclamation event listeners, to correctly handle the case of several
nullfs mounts over the same directory.
For the filesystem not having nullfs mounts over it, the overhead
added is a single mount interlock lock/unlock in the vnode reclamation
path.
In collaboration with: pho
MFC after: 3 weeks
for getvfsbyname(3) operation when called from 32bit process, and
getvfsbyname(3) is used by recent bsdtar import.
Reported by: many
Tested by: David Naylor <naylor.b.david@gmail.com>
MFC after: 5 days
the i/o regions of the vnode data space. The implementation is quite
simple-minded, it uses the list of the lock requests, ordered by
arrival time. Each request may be for read or for write. The
implementation is fair FIFO.
MFC after: 2 month
over just the active vnodes associated with a mount point to replace
MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync
routines.
The vfs_msync routine is run every 30 seconds for every writably
mounted filesystem. It ensures that any files mmap'ed from the
filesystem with modified pages have those pages queued to be
written back to the file from which they are mapped.
The ffs_lazy_sync and qsync routines are run every 30 seconds for
every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine
ensures that any files that have been accessed in the previous
30 seconds have had their access times queued for updating in the
filesystem. The qsync routine ensures that any files with modified
quotas have those quotas queued to be written back to their
associated quota file.
In a system configured with 250,000 vnodes, less than 1000 are
typically active at any point in time. Prior to this change all
250,000 vnodes would be locked and inspected twice every minute
by the syncer. For UFS/FFS filesystems they would be locked and
inspected six times every minute (twice by each of these three
routines since each of these routines does its own pass over the
vnodes associated with a mount point). With this change the syncer
now locks and inspects only the tiny set of vnodes that are active.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
a mount point. Active vnodes are those with a non-zero use or hold
count, e.g., those vnodes that are not on the free list. Note that
this list is in addition to the list of all the vnodes associated
with a mount point.
To avoid adding another set of linkage pointers to the vnode
structure, the active list uses the existing linkage pointers
used by the free list (previously named v_freelist, now renamed
v_actfreelist).
This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops
over just the active vnodes associated with a mount point (typically
less than 1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
used only as a helper function in that file. Replace sole call to
vbusy() with inline code in vholdl(). Replace sole calls to vfree()
and vdestroy() with inline code in vdropl().
The Clang compiler already inlines these functions, so they do not
show up in a kernel backtrace which is confusing. Also you cannot
set their frame in kgdb which means that it is impossible to view
their local variables. So, while the produced code is unchanged,
the debugging should be easier.
Discussed with: kib
MFC after: 2 weeks
The primary changes are that the user of the interface no longer
needs to manage the mount-mutex locking and that the vnode that
is returned has its mutex locked (thus avoiding the need to check
to see if its is DOOMED or other possible end of life senarios).
To minimize compatibility issues for third-party developers, the
old MNT_VNODE_FOREACH interface will remain available so that this
change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH
will be removed in head.
The reason for this update is to prepare for the addition of the
MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the
active vnodes associated with a mount point (typically less than
1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
static and declare its prototype in sys/vnode.h) so that it can be
called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c)
instead of the body of vinactive() being cut and pasted into
process_deferred_inactive().
Reviewed by: kib
MFC after: 2 weeks
unp->unp_vnode pointer to detect if there is a vnode associated with
(binded to) this socket and does necessary cleanup if there is.
The issue is that after forced unmount this check may be too late as
the unp_vnode is reclaimed and the reference is stale.
To fix this provide a helper function that is called on a socket vnode
reclamation to do necessary cleanup.
Pointed by: kib
Reviewed by: kib
MFC after: 2 weeks
mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which
is needed to guarantee a synchronous completion of the initiated i/o
before syscall or VOP return. Global removal of MNTK_ASYNC option is
harmful because not only i/o started from corresponding thread becomes
synchronous, but all i/o is synchronous on the filesystem which is
initiated during sync(2) or syncer activity.
Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local
thread flag to disable async i/o for current thread only. Use the
opportunity to move DOINGASYNC() macro into sys/vnode.h and
consistently use it through places which tested for MNTK_ASYNC.
Some testing demonstrated 60-70% improvements in run time for the
metadata-intensive operations on async-mounted UFS volumes, but still
with great deviation due to other reasons.
Reviewed by: mckusick
Tested by: scottl
MFC after: 2 weeks
Unmounts do vfs_msync() before calling VFS_UNMOUNT(), but there is
still a race allowing a process to dirty pages after msync
finished. Remounts rw->ro just left dirty pages in system.
Reviewed by: alc, tegge (long time ago)
Tested by: pho
MFC after: 2 weeks
The wrong structure happened to work since the only argument used was
the vnode which is in the same place in both VOP_SETATTR() and the two
extattr VOPs.
MFC after: 3 days
these to trigger a NOTE_ATTRIB EVFILT_VNODE kevent when the extended
attributes of a vnode are changed.
Note that OS X already implements this behavior.
Reviewed by: rwatson
MFC after: 2 weeks
madvise(2) except that it operates on a file descriptor instead of a
memory region. It is currently only supported on regular files.
Just as with madvise(2), the advice given to posix_fadvise(2) can be
divided into two types. The first type provide hints about data access
patterns and are used in the file read and write routines to modify the
I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are
thus filesystem independent. Note that to ease implementation (and
since this API is only advisory anyway), only a single non-normal
range is allowed per file descriptor.
The second type of hints are used to hint to the OS that data will or
will not be used. These hints are implemented via a new VOP_ADVISE().
A default implementation is provided which does nothing for the WILLNEED
request and attempts to move any clean pages to the cache page queue for
the DONTNEED request. This latter case required two other changes.
First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests
vinvalbuf() to only flush clean buffers for the vnode from the buffer
cache and to not remove any backing pages from the vnode. This is
used to ensure clean pages are not wired into the buffer cache before
attempting to move them to the cache page queue. The second change adds
a new vm_object_page_cache() method. This method is somewhat similar to
vm_object_page_remove() except that instead of freeing each page in the
specified range, it attempts to move clean pages to the cache queue if
possible.
To preserve the ABI of struct file, the f_cdevpriv pointer is now reused
in a union to point to the currently active advice region if one is
present for regular files.
Reviewed by: jilles, kib, arch@
Approved by: re (kib)
MFC after: 1 month
As noted in kern/159780, printf() is not very jail-friendly, since it can't be easily monitored by jail management tools. This patch reports an error via log() instead, which, if nobody is watching the log file, still prints to the console.
Approved by: mentor (rwatson)
Submitted by: Eugene Grosbein <eugen@eg.sd.rdtc.ru>
MFC after: 5 days
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
so that it is visible to userland programs. This change enables
the `mount' command with no arguments to be able to show if a
filesystem is mounted using journaled soft updates as opposed
to just normal soft updates.
Approved by: re (bz)
option to vm_object_page_remove() asserts that the specified range of pages
is not mapped, or more precisely that none of these pages have any managed
mappings. Thus, vm_object_page_remove() need not call pmap_remove_all() on
the pages.
This change not only saves time by eliminating pointless calls to
pmap_remove_all(), but it also eliminates an inconsistency in the use of
pmap_remove_all() versus related functions, like pmap_remove_write(). It
eliminates harmless but pointless calls to pmap_remove_all() that were being
performed on PG_UNMANAGED pages.
Update all of the existing assertions on pmap_remove_all() to reflect this
change.
Reviewed by: kib
should not change. Fetch the td_user_pri under the thread lock. This
is probably not necessary but a magic number also seems preferable to
knowing the implementation details here.
Requested by: Jason Behmer < jason DOT behmer AT isilon DOT com >
disk dumping.
With the option SW_WATCHDOG on, these operations are doomed to let
watchdog fire, fi they take too long.
I implemented the stubs this way because I really want wdog_kern_*
KPI to not be dependant by SW_WATCHDOG being on (and really, the option
only enables watchdog activation in hardclock) and also avoid to
call them when not necessary (avoiding not-volountary watchdog
activations).
Sponsored by: Sandvine Incorporated
Discussed with: emaste, des
MFC after: 2 weeks
the mutexes in the wrong order for the case where the
MBF_MNTLSTLOCK is set. I believe this did have the
potential for deadlock. For example, if multiple nfsd threads
called vfs_busyfs(), which calls vfs_busy() with MBF_MNTLSTLOCK.
Thanks go to pho for catching this during his testing.
Tested by: pho
Submitted by: kib
MFC after: 2 weeks
- entirely eliminate some calls to uio_yeild() as being unnecessary,
such as in a sysctl handler.
- move should_yield() and maybe_yield() to kern_synch.c and move the
prototypes from sys/uio.h to sys/proc.h
- add a slightly more generic kern_yield() that can replace the
functionality of uio_yield().
- replace source uses of uio_yield() with the functional equivalent,
or in some cases do not change the thread priority when switching.
- fix a logic inversion bug in vlrureclaim(), pointed out by bde@.
- instead of using the per-cpu last switched ticks, use a per thread
variable for should_yield(). With PREEMPTION, the only reasonable
use of this is to determine if a lock has been held a long time and
relinquish it. Without PREEMPTION, this is essentially the same as
the per-cpu variable.
should_yield(). Use this in various places. Encapsulate the common
case of check-and-yield into a new function maybe_yield().
Change several checks for a magic number of iterations to use
should_yield() instead.
MFC after: 1 week
before checking the validity of the next buffer pointer. Otherwise, the
buffer might be reclaimed after the check, causing iteration to run into
wrong buffer.
Reported and tested by: pho
MFC after: 1 week
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
When shared-locked vnode is supplied as an argument to vunref(9) and
resulting usecount is 0, set VI_OWEINACT and do not try to upgrade vnode
lock. The later could cause vnode unlock, allowing the vnode to be
reclaimed meantime.
Tested by: pho
MFC after: 1 week
and vop_reclaim() methods. They seems to be unused, and the reported
situation is normal for the forced unmount.
MFC after: 1 week
X-MFC-note: keep prtactive symbol in vfs_subr.c
when mount and update are executed in parallel.
Encapsulate syncer vnode deallocation into the helper function
vfs_deallocate_syncvnode(), to not externalize sync_mtx from vfs_subr.c.
Found and reviewed by: jh (previous version of the patch)
Tested by: pho
MFC after: 3 weeks
least one execute bit set, otherwise execve(2) will return EACCES even
for an user with PRIV_VFS_EXEC privilege.
Add the check also to vaccess(9), vaccess_acl_nfs4(9) and
vaccess_acl_posix1e(9). This makes access(2) to better agree with
execve(2). Because ZFS doesn't use vaccess(9) for VEXEC, add the check
to zfs_freebsd_access() too. There may be other file systems which are
not using vaccess*() functions and need to be handled separately.
PR: kern/125009
Reviewed by: bde, trasz
Approved by: pjd (ZFS part)
Actually it is hard to properly handle such a failure, especially in MNT_UPDATE
case. The only reason for the vfs_allocate_syncvnode() function to fail is
getnewvnode() failure. Fortunately it is impossible for current implementation
of getnewvnode() to fail, so we can assert this and make
vfs_allocate_syncvnode() void. This in turn free us from handling its failures
in the mount code.
Reviewed by: kib
MFC after: 1 month
bufobj lock. If b_bufobj is not NULL, then bufobj lock should be
held when manipulating the flags. Not doing this sometimes leaves
BV_BKGRDINPROG to be erronously set, causing softdep' getdirtybuf() to
stuck indefinitely in "getbuf" sleep, waiting for background write to
finish which is not actually performed.
Add BO_LOCK() in the cases where it was missed.
In collaboration with: pho
Tested by: bz
Reviewed by: jeff
MFC after: 1 month
the calculation that is based on the kernel's heap size more conservative.
Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the
time being set MAXVNODES_MAX to a large value.
Reviewed by: jhb@
MFC after: 6 weeks
different mount points, e.g. the nullfs vnode and the covered vnode
from the lower filesystem. In this case, existing assertion in
vop_rename_pre() may be triggered.
Check for vnode locks equiality instead of the vnodes itself to
not trip over the situation.
Submitted by: Mikolaj Golub <to.my.trociny@gmail.com>
Tested by: pho
MFC after: 2 weeks
brings in support for an optional intent log which eliminates the need
for background fsck on unclean shutdown.
Sponsored by: iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
count) while vnode is exclusively locked.
The code for vput(9), vrele(9) and vunref(9) is merged.
In collaboration with: pho
Reviewed by: alc
MFC after: 3 weeks
the namecache records. The reclamation is not enabled by default because
for typical workload it would make namecache unusable, but large nested
directory tree easily puts any process that accesses filesystem into 1
second wait for vlru.
Reported by: yar (long time ago)
MFC after: 3 days
flag. Besides providing the redundand information, need to update both
vnode and object flags causes more acquisition of vnode interlock.
OBJ_MIGHTBEDIRTY is only checked for vnode-backed vm objects.
Remove VI_OBJDIRTY and make sure that OBJ_MIGHTBEDIRTY is set only for
vnode-backed vm objects.
Suggested and reviewed by: alc
Tested by: pho
MFC after: 3 weeks
want to provide VOP_ACCESSX(9) don't have to implement both. Note that
this commit makes implementation of either of these two mandatory.
Reviewed by: kib
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
