Commit Graph

14 Commits

Author SHA1 Message Date
Navdeep Parhar
d14b0ac129 cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This
includes support for the NIC and TOE features of the 40G, 10G, and
1G/100M cards based on the T5.

The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4)
has been updated instead of writing a brand new driver.  T5 cards will
show up as cxl (short for cxlgb) ports attached to the t5nex bus driver.

Sponsored by:	Chelsio
2013-03-30 02:26:20 +00:00
Navdeep Parhar
d938ff1d15 cxgbe(4): Update firmware to 1.8.4.0.
MFC after:	5 days
2013-02-26 00:10:28 +00:00
Navdeep Parhar
0a0a697c73 cxgbe(4): Updates to the hardware L2 table management code.
- Add full support for IPv6 addresses.

- Read the size of the L2 table during attach.  Do not assume that PCIe
  physical function 4 of the card has all of the table to itself.

- Use FNV instead of Jenkins to hash L3 addresses and drop the private
  copy of jhash.h from the driver.

MFC after:	1 week
2013-01-14 20:36:22 +00:00
Navdeep Parhar
8a7ba352b0 Update interface to firmware 1.6.2 and include the firmware in the driver.
Obtained from:	Chelsio
MFC after:	1 week
2012-09-13 06:32:52 +00:00
Navdeep Parhar
e682d02e12 Support for TCP DDP (Direct Data Placement) in the T4 TOE module.
Basically, this is automatic rx zero copy when feasible.  TCP payload is
DMA'd directly into the userspace buffer described by the uio submitted
in soreceive by an application.

- Works with sockets that are being handled by the TCP offload engine
  of a T4 chip (you need t4_tom.ko module loaded after cxgbe, and an
  "ifconfig +toe" on the cxgbe interface).
- Does not require any modification to the application.
- Not enabled by default.  Use hw.t4nex.<X>.toe.ddp="1" to enable it.
2012-08-17 00:49:29 +00:00
Navdeep Parhar
ae11e5c996 Assume INET, INET6, and TCP_OFFLOAD when the driver is built out of tree and
KERNBUILDDIR is not set.

MFC after:	2 weeks
2012-08-14 23:08:49 +00:00
Navdeep Parhar
a1ea9a8276 cxgbe(4): support for IPv6 TSO and LRO.
Submitted by:	bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
Navdeep Parhar
09fe63205c - Updated TOE support in the kernel.
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
  These are available as t3_tom and t4_tom modules that augment cxgb(4)
  and cxgbe(4) respectively.  The cxgb/cxgbe drivers continue to work as
  usual with or without these extra features.

- iWARP driver for Terminator 3 ASIC (kernel verbs).  T4 iWARP in the
  works and will follow soon.

Build-tested with make universe.

30s overview
============
What interfaces support TCP offload?  Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE

Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe

Which connections are offloaded?  Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe

Reviewed by:	bz, gnn
Sponsored by:	Chelsio communications.
MFC after:	~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Navdeep Parhar
733b92779e Many updates to cxgbe(4)
- Device configuration via plain text config file.  Also able to operate
  when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
  ofld tx queues.

- Generic interrupt handler routine that can process any event on any
  kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls.  cxgbetool can now install a firmware
  to the card ("loadfw" command) and can read the card's memory
  ("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.*  This is
  primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

MFC after:	1 month
2011-12-16 02:09:51 +00:00
Ulrich Spörlein
898dec7830 Fix make buildworld -DMODULES_WITH_WORLD
Sort opt_ srcs
2011-06-23 20:31:52 +00:00
Navdeep Parhar
4dba21f17e L2 table code. This is enough to get the T4's switch + L2 rewrite
filters working.  (All other filters - switch without L2 info rewrite,
steer, and drop - were already fully-functional).

Some contrived examples of "switch" filters with L2 rewriting:

# cxgbetool t4nex0  iport 0  dport 80  action switch  vlan +9  eport 3
Intercept all packets received on physical port 0 with TCP port 80 as
destination, insert a vlan tag with VID 9, and send them out of port 3.

# cxgbetool t4nex0  sip 192.168.1.1/32  ivlan 5  action switch \
	vlan =9  smac aa:bb:cc:dd:ee:ff  eport 0
Intercept all packets (received on any port) with source IP address
192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac
to aa:bb:cc:dd:ee:ff, and send it out of port 0.

MFC after:	1 week
2011-05-30 21:07:26 +00:00
Navdeep Parhar
489eeba940 T4 packet timestamps.
Reference code that shows how to get a packet's timestamp out of
cxgbe(4).  Disabled by default because we don't have a standard way
today to pass this information up the stack.

The timestamp is 60 bits wide and each increment represents 1 tick of
the T4's core clock.  As an example, the timestamp granularity is ~4.4ns
for this card:

# sysctl dev.t4nex.0.core_clock
dev.t4nex.0.core_clock: 228125

MFC after:	1 week
2011-05-05 02:38:08 +00:00
Navdeep Parhar
230abe75dc Allow multiple modules within sys/modules/cxgbe. The first one is if_cxgbe.
MFC after:	3 days
2011-04-01 00:25:32 +00:00
Navdeep Parhar
54e4ee7163 cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.
MFC after:	3 weeks
2011-02-18 08:00:26 +00:00