the revamped sysctl code did not work, and needed a change. This
makes the limit get set at the time that all sysctl stats are
created and is actually more elegant imho anyway.
TX hot path by getting rid of index calculations and simply
managing pointers. Much of the creative code is due to my
coworker here at Intel, Alex Duyck, thanks Alex!
Also, this whole series of patches was given the critical
eye of Gleb Smirnoff and is all the better for it, thanks
Gleb!
- add a limit for both RX and TX, change the default to 256
- change the sysctl usage to be common, and now to be called
during init for each ring.
- the TX limit is not yet used, but the changes in the last
patch in this series uses the value.
- the motivation behind these changes is to improve data
locality in the final code.
- rxeof interface changes since it now gets limit from the
ring struct
defines (at Gleb's request). Also, change the defines around
the old transmit code to IXGBE_LEGACY_TX, I do this to make
it possible to define this regardless of the OS level (it is
not defined by default). There are also a couple changed
comments for clarity.
these are FCOE stats (fiber channel over ethernet), something that
FreeBSD does not yet have, they were mistaken for flow control by
the implementor I believe. Secondly, the real flow control stats
are oddly named with a 'link' tag on the front, it was requested
by my validation engineer to make these stats have the same name as
the igb driver for clarity and that seemed reasonable to me.
multiqueue code, this functionality has proven to be more
trouble than it was worth. Thanks to Gleb for a second
critical look over my code and help in the patches!
It returns memory regions restricted from being used by kernel. These
regions are dfined in "memreserve" property of root node in the same
format as "reg" property of /memory node
embryonic connection has been setup and never attempt to abort a tid
before this is done. This fixes a bad race where a listening socket is
closed when the driver is in the middle of step (b) here. The symptom
of this were "ARP miss" errors from the driver followed by tid leaks.
A hardware-offloaded passive open works this way:
a) A SYN "hits" the TCAM entry for a server tid and the chip delivers it
to the queue associated with the server tid (say, queue A). It waits
for a response from the driver telling it what to do.
b) The driver decides it is ok to proceed. It adds the new tid to the
list of embryonic connections associated with the server tid and then
hands off the SYN to the kernel's syncache to make sure that the kernel
okays it too. If it does then the driver provides an L2 table entry,
queue id (say, queue B), etc. and instructs the chip to send the SYN/ACK
response.
c) The chip delivers a status to queue B depending on how the third step
of the 3-way handshake goes. The driver removes the tid from its list
of embryonic connections and either expands the syncache entry or
destroys the tid. In any case all subsequent messages for the new tid
will be delivered to queue B, not queue A. Anything running in queue B
knows that the L2 entry has long been setup and the new flag is of no
interest from here on. If the listener is closed it will deal with
so_comp as normal.
MFC after: 1 week
now this works for non-debug and debug builds.
* Add a comment reminding me (or someone) to audit all of the relevant
math to ensure there's no weird wrapping issues still lurking about.
But yes, this does seem to be mostly working.
Pointy-hat-to: adrian, yet again
* add some further debugging prints, which are quite nice to have
* add in ALQ hooks (optional!) to allow for the TDMA information to be
logged in-line with the TX and RX descriptor information.
The existing logic wrapped programming nexttbtt at 65535 TU.
This is not good enough for the 11n chips, whose nexttbtt register
(GENERIC_TIMER_0) has an initial value from 0..2^31-1 TSF.
So converting the TU to TSF had the counter wrap at (65535 << 10) TSF.
Once this wrap occured, the nexttbtt value was very very low, much
lower than the current TSF value. At this point, the nexttbtt timer
would constantly fire, leading to the TX queue being constantly gated
open.. and when this occured, the sender was not correctly transmitting
in its slot but just able to continuously transmit. The master would
then delay transmitting its beacon until after the air became free
(which I guess would be after the burst interval, before the next burst
interval would quickly follow) and that big delta in master beacon TX
would start causing big swings in the slot timing adjustment.
With this change, the nexttbtt value is allowed to go all the way up
to the maximum value permissable by the 32 bit representation.
I haven't yet tested it to that point; I really should. The AR5212
HAL now filters out values above 65535 TU for the beacon configuration
(and the relevant legal values for SWBA, DBA and NEXTATIM) and the
AR5416 HAL just dutifully programs in what it should.
With this, TDMA is now useful on the 802.11n chips.
Tested:
* AR5416, AR9280 TDMA slave
* AR5413 TDMA slave
what the maximum legal values are.
The current beacon timer configuration from TDMA wraps things at
HAL_BEACON_PERIOD-1 TU. For the 11a chips this is fine, but for
the 11n chips it's not enough resolution. Since the 11a chips have a
limit on what's "valid", just enforce this so when I do write larger
values in, they get suitably wrapped before programming.
Tested:
* AR5413, TDMA slave
Todo:
* Run it for a (lot) longer on a clear channel, ensure that no strange
slippages occur.
* Re-validate this on STA configurations, just to be sure.
fail or not. The mbuf pointer is no longer valid, so
can't be reused after.
Fix igb_mq_start() where mbuf pointer was used after
drbr_enqueue().
This eventually leads us to all invocations of
igb_mq_start_locked() called with third argument as NULL.
This allows us to simplify this function.
Submitted by: Karim Fodil-Lemelin <fodillemlinkarim gmail.com>
Reviewed by: jfv
detailed information under the sound debug. To make it easier accessible,
export that information through the set of sysctls like dev.hdaa.X.nidY.
Also tune some output to make it both more compact and informative.
After chatting with the MAC team, the TSF writes (at least on the 11n
MACs, I don't know about pre-11n MACs) are done as 64 bit writes that
can take some time. So, doing a 32 bit TSF write is definitely not
supported. Leave a comment here which explains that.
Whilst here, add a comment which outlines that after a reset or TSF
write, the TSF write may take a while (up to 50uS) to update.
A write or reset shouldn't be done whilst the previous one is in
flight. Also (and this isn't currently done) a read shouldn't
occur until the SLEEP32_TSF_WRITE_STAT is clear. Right now we're
not doing that, mostly because we haven't been doing lots of TSF
resets/writes until recently.
TSF write.
The TSF_L32 update is fine for the AR5413 (and later, I guess) 11abg NICs
however on the 11n NICs this didn't work. The TSF writes were causing
a much larger time to be skipped, leading to the timing to never
converge.
I've tested this 64 bit TSF read, adjust and write on both the
11n NICs and the AR5413 NIC I've been using for testing. It works
fine on each.
This patch allows the AR5416/AR9280 to be used as a TDMA member.
I don't yet know why the AR9280 is ~7uS accurate rather than ~3uS;
I'll look into it soon.
Tested:
* AR5413, TDMA slave (~ 3us accuracy)
* AR5416, TDMA slave (~ 3us accuracy)
* AR9280, TDMA slave (~ 7us accuracy)
on the 802.11n NICs.
The 802.11n NICs return a TBTT value that continues far past the 16 bit
HAL_BEACON_PERIOD time (in TU.) The code would constrain nextslot to
HAL_BEACON_PERIOD, but it wasn't constraining nexttbtt - the pre-11n
NICs would only return TU values from 0 -> HAL_BEACON_PERIOD. Thus,
when nexttbtt exceeded 64 milliseconds, it would not wrap (but nextslot
did) which lead to a huge tsfdelta.
So until the slot calculation is converted to work in TSF rather than
a mix of TSF and TU, "make" the nexttbtt values match the TU assumptions
for pre-11n NICs.
This fixes the crazy deltatsf calculations but it doesn't fix the
non-convergent tsfdelta issue. That'll be fixed in a subsequent commit.
... instead of the ever increasing ones.
Also, do free old resources when allocating new ones when cx states
change.
Tested by: Tom Lislegaard <Tom.Lislegaard@proact.no>
Obtained from: jkim
MFC after: 1 week
- The feature is dangerous because the kernel code didn't check
validity of the memory address provided from user space.
- It seems that mdconfig(8) never really supported attaching preloaded
memory disks.
- Preloaded memory disks are automatically attached during md(4)
initialization. Thus there shouldn't be much use for the feature.
PR: kern/169683
Discussed on: freebsd-hackers
encryption types.
The AR5210 only has four WEP key slots, in contrast to what the
later MACs have (ie, the keycache.) So there's no way to store a "clear"
key.
Even if the driver is taught to not allocate CLR key entries for
the AR5210, the hardware will actually attempt to decode the encrypted
frames with the (likely all 0!) WEP keys.
So for now, disable the hardware encryption entirely and just so it
all in software. That allows both WEP -and- WPA to actually work.
If someone wishes to try and make hardware WEP _but_ software WPA work,
they'll have to create a HAL capability to enable/disable hardware
encryption based on the current STA/Hostap mode. However, making
multi-vap work with one WEP and one WPA VAP will require hardware
encryption to be disabled anyway.
from HDMI/DisplayPort devices in form of general connection status and
sound(4)-style channel matrix. Now that information is only reported in
readable form to verbose logs, but potentially could be used by sound(4)
to correctly choose default devices and configure vchans.
Fix rear and side channels swap on analog 7.1 outputs. As soon as there is
a huge mess in industry about naming and using of these channels, duplicate
rear channels of 4 and 5.1 streams to both read and side speakers.
* For CABQ traffic, I -can- chain them together using the next pointer
and just push that particular chain head to the CABQ. However, this
doesn't magically make EDMA TX CABQ work - I have to do some further
hoop jumping.
* upon setup, tell the alq code what the chip information is.
* add TX/RX path logging for legacy chips.
* populate the tx/rx descriptor length fields with a best-estimate.
It's overly big (96 bytes when AH_SUPPORT_AR5416 is enabled)
but it'll do for now.
Whilst I'm here, add CURVNET_RESTORE() here during probe/attach as a
partial solution to fixing crashes during attach when the attach fails.
There are other attach failures that I have to deal with; those'll come
later.
* Add a new method which allows the driver to push the MAC/phy/hal info
into the logging stream.
* Add a new ALQ logging entry which logs the mac/phy/hal information.
* Modify the ALQ startup path to log the MAC/phy/hal information
so the decoder knows which HAL/chip is generating this information.
* Convert the header and mac/phy/hal information to use be32, rather than
host order. I'd like to make this stuff endian-agnostic so I can
decode MIPS generated logs on a PC.
This requires some further driver modifications to correctly log the
right initial chip information.
Also - although noone bar me is currently using this, I've shifted the
debug bitmask around a bit. Consider yourself warned!
This was broken by me when merging the 802.11n aggregate descriptor chain
setup with the default descriptor chain setup, in preparation for supporting
AR9380 NICs.
The corner case here is quite specific - if you queue an aggregate frame
with >1 frames in it, and the last subframe has only one descriptor making
it up, then that descriptor won't have the rate control information
copied into it. Look at what happens inside ar5416FillTxDesc() if
both firstSeg and lastSeg are set to 1.
Then when ar5416ProcTxDesc() goes to fill out ts_rate based on the
transmit index, it looks at the rate control fields in that descriptor
and dutifully sets it to be 0.
It doesn't happen for non-aggregate frames - if they have one descriptor,
the first descriptor already has rate control info.
I removed the call to ath_hal_setuplasttxdesc() when I migrated the
code to use the "new" style aggregate chain routines from the HAL.
But I missed this particular corner case.
This is a bit inefficient with MIPS boards as it involves a few redundant
writes into non-cachable memory. I'll chase that up when it matters.
Tested:
* AR9280 STA mode, TCP iperf traffic
* Rui Paulo <rpaulo@> first reported this and has verified it on
his AR9160 based AP.
PR: kern/173636
This was done to work around build issues when building projects/bhyve on an
8.x system at the time.
The workaround is no longer needed so re-instantiate r228556 in projects/bhyve.
Discussed with: grehan@
Obtained from: NetApp
This alleviates issues on newer Sandy/Ivy Bridge gear that seems to require
boatloads more ACPI resources than before.
Reviewed by: avg@
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
This happens during a scan in STA mode; any queued data frames will
be power save queued but as there's no TIM in STA mode, it panics.
This was introduced by me when I disabled my driver-aware power save
handling support.
actual traffic with an AR9380/AR9382/AR9485.
The sample rate control stats would show impossibly large numbers for
"successful packets transmitted." The number was a tad under 2^^64-1.
So after a bit of digging, I found that the sample rate control code
was making 'tries' turn into a negative number.. and this was because
ts_longretry was too small.
The hardware returns "ts_longretry" at the current rate selection,
not overall for that TX descriptor. So if you setup four TX rate
scenarios and the second one works, ts_longretry is only set for
the number of attempts at that second rate scenario. The FreeBSD HAL
code does the correction in ath_hal_proctxdesc() - however, this isn't
possible with EDMA.
EDMA TX completion is done separate from the original TX descriptor.
So the real solution is to split out "find ts_rate and ts_longretry"
from "complete TX descriptor". Until that's done, put a hack in
the EDMA TX path that uses the rate scenario information in the ath_buf.
Tested: AR9380, AR9382, AR9485 STA mode
in nve(4). The OS_API structure defined in os.h expects NV_API_CALL
attributes, effectively regparm(0), on its function pointers, but all
the functions were declared and defined without this attribute.
MFC after: 1 week
DWC OTG driver. Fix a hang issue when using LOW and FULL speed
BULK traffic. Make sure we don't ask for data in the last
microframe. This allows using devices like USB mice and USB
keyboards connected to the RPI-B.
Suggested by: gonzo @
events.
This is primarily for the TX EDMA and TX EDMA completion. I haven't yet
tied it into the EDMA RX path or the legacy TX/RX path.
Things that I don't quite like:
* Make the pointer type 'void' in ath_softc and have if_ath_alq*()
return a malloc'ed buffer. That would remove the need to include
if_ath_alq.h in if_athvar.h.
* The sysctl setup needs to be cleaned up.
I'm using this to debug EDMA TX and RX descriptors and it's really helpful
to have a non-printf() way to decode frames.
I won't link this into the build until I've tidied it up a little more.
This will eventually be behind ATH_DEBUG_ALQ.
kernel memory leakage to userspace. For the typical use, when a
filesystem put on the md disk, the change only results in CPU and
memory bandwidth spent to zero the page, since filsystems make sure
that user never see unwritten content. But if md disk is used as raw
device by userspace, the garbage is exposed.
Reported by: Paul Schenkeveld <freebsd@psconsult.nl>
MFC after: 2 weeks
ps-poll is totally broken in its current form.
This should unbreak things enough to let people use PS-POLL devices,
but leave it in place for me to finish PS-POLL handling.
function use that for JBOD and Thunderbolt disk write command. Now
we only have one implementation in mfi.
- Fix dumping on Thunderbolt cards. Polled IO commands do not seem to
be normally acknowledged by changing cmd_status to MFI_STAT_OK.
In order to get acknowledgement of the IO is complete, the Thunderbolt
command queue needs to be run through. I added a flag MFI_CMD_SCSI
to indicate this command is being polled and to complete the
Thunderbolt wrapper and indicate the result. This flag needs to be
set in the JBOD case in case if that us using Thunderbolt card.
When in the polling loop check for completed commands.
- Remove mfi_tbolt_is_ldio and just do the check when needed.
- Fix an issue when attaching of disk device happens when a device is
already scheduled to be attached but hasn't attached.
- add a tunable to allow raw disk attachment to CAM via:
hw.mfi.allow_cam_disk_passthrough=1
- fixup aborting of commands (AEN and LD state change). Use a generic
abort function and only wait the command being aborted not both.
Thunderbolt cards don't seem to abort commands so the abort times
out.
counter) when the syncache doesn't want the driver to reply to an
incoming SYN. This fixes a harmless bug where tids_in_use would
go out of sync with the hardware counter.
MFC after: 3 days
the non-aggregate path.
I "cheated" by using some TX setup code in our HAL that isn't present
in the atheros HAL (or Linux ath9k.)
The old path for forming aggregates was:
* setup the rate control in the first descriptor;
* call chaintxdesc() on all the frames;
* call setupfirsttxdesc() on the first descrpitor in the first
frame;
* call setuplasttxdesc() on the last descriptor in the last frame.
The new path for forming aggregates looks like the non-aggregate path:
* call setuptxdesc() on the first descriptor in the first frame;
* setup the rate control in the first descriptor;
* call filltxdesc() on each descriptor in the frame;
* if it's an aggregate - call set11n_aggr_{first, middle, last} as
appropriate (see the code for a description of what is "appropriate".)
Now, this is done primarily for the AR9300 HAL - it doesn't implement
the first set of aggregate functions. It just has the older methods
and the "first/middle/last" aggregate methods. So, let's convert the
code to use these.
Note: the AR5416 HAL in FreeBSD had that code (from me, a while ago)
and a previous commit brought it up to behave the same as the AR9300
HAL routines.
There's some further tidyups to be done - specifically, avoid doing
multiple calls to the 11n descriptor functions. I shouldn't call
clr11n_aggr(), then set11n_aggr_middle(), then also set11n_aggr_first().
On (at least MIPS) the TX descriptors are in non-cachable memory and
this will cause multiple slow writes.
I'll debug/tidy that up in a future commit.
Tested:
* AR9280, STA
* AR9280/AR9160, AP
* AR9380, STA (using a local, closed source HAL, sorry!)
the 'PREVENT/ALLOW MEDIUM REMOVAL' SCSI command. An example of such a
device is the STmicro ST72682. We send the SCSI command for every open and
close, which can result in a significant amount of spam on the console
during boot.
Reviewed by: hps@
them, please let me know if not). Most of these are of the form:
static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};
The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).
I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).
Reviewed by: yongari, marius
MFC after: 1 week
temporarily stores characters if the TTY buffer is full when
used a as a console. This can happen when a console is suspended.
Also properly do the flow stop signalling when this happens and
flow start when the condition changes back to normal again.
Bump __FreeBSD_version to force external kernel modules
to be recompiled. No kernel API changes.
MFC after: 1 week
Suggested by: ed @
PNP0510 and FUJ02E5 for a "Wacom Tablet at FuS Lifebook T"
PNP0502 and PNP0511 for some other generic devices.
PR: kern/173357
Submitted by: Andrey Zakharchenko <avz@jscc.ru>
Approved by: cperciva (implicit)
MFC after: 1 week
... instead of whatever random value may happen to be in the register.
ecx is important to some cpuid leaves.
To do: extend cpuctl interface to provide for ecx value parameter.
MFC after: 5 days
* don't poke ath_hal_txstart() if nothing was pushed into the FIFO during
the refill process;
* shuffle around the TX debugging output a little so it's logged at
TX hardware enqueue;
* Add logging of the TX status processing.
of small (< 256 byte) aggregate frames.
This needs to be done or 11n aggregation TX just simply doesn't work
on these NICs.
Whilst here, extend some debug printing; I was using this whilst
debugging the TX power setup in the TX descriptor(s) on the AR9380.
* introduce a new HAL API method to pull out the TX status descriptor
contents.
* Add num_delims to the 11n first aggr method. This isn't used by the
driver at the moment so it won't affect anything.
command properly. Without this change, mfi(4) always sends 10 byte READ
and WRITE commands, which will cause data corruption when device is
larger than 2^32 sectors.
PR: kern/173291
Submitted by: Steven Hartland <steven.hartland multiplay.co.uk>
Reviewed by: mav
MFC after: 2 weeks
all supported debugging bits.
- If DRM_DEBUG_DEFAULT_ON isn't defined, then initialize drm_debug_flag
to zero.
DRM_DEBUG_DEFAULT_ON is defined when module is build with -DDEBUG_DRM
or if kernel config has 'options DEBUG_DRM'.
Reviewed by: kib
Add software mixer table for FastTrack Ultra.
Only set volume controls which are valid at startup for standard
USB audio devices, so that settings like treble and bass use
the reset defaults.
MFC after: 1 week
PCM API doesn't support showing all the knobs. Make sure all the USB audio
mixer nodes are freed at detach. Before this patch USB audio would leak
some memory at detach. Print out buffer sizes in number of samples at attach.
Fix setting of volume controls when the number of channels is greater than two.
MFC after: 1 week
removed in r99417. bge(4) controllers can do TCP checksum offload
for IP fragmented datagrams but unlike ti(4), it lacks UDP checksum
offloading for IP fragmented datagrams. The problem was bge(4)
blindly requested TCP/UDP checksum for IP fragmented datagrams such
that it resulted in corrupted UDP datagrams before r99417.
Remove remaining code for TCP checksum offloading for IP fragmented
datagrams which should have been removed in r99417.
datagrams. Traditionally upper stack fragmented packets without
computing TCP/UDP checksum and these datagrams were passed to
driver. But there are chances that other packets slip into the
interface queue in SMP world. If this happens firmware running on
MIPS 4000 processor in the controller would see mixed packets and
it shall send out corrupted packets.
While I'm here simplify checksum offloading setup.
MFC After: 1 week
(interrupt). All other ATA PIO commands transfer one sector or 512 bytes
at one time. Hardcode these exceptions in ata(4) with ATA_CAM option.
This fixes timeout of READ LOG EXT command used by `smartctl -x /dev/adaX`.
- Testing TSO6 has led me to discover that HW RSC is
a problematic feature, it is ONLY designed to work
with IPv4 in the first place, and if IP forwarding
is done it can't be disabled as LRO in the stack,
also initial testing we've done at Intel shows an
equal performance using TSO[46] on the TX and LRO
on RX, if you ran older code on 82599 or later hardware
you actually could have detrimental performance for
this reason. So I am disabling the feature by default
and all our adapters will now use LRO instead.
- If you have flow control off and multiple queues it
was possible when the buffer of one queue becomes
full that all RX movement is stalled, to eliminate
this problem a feature bit is now set that will allow
packets to be dropped when full rather than stall.
Note, the default is to have flow control on, and this
keeps this from happening.
- Because of the recent fixes in the stack, LRO is now
auto-disabled when problematic, so I have decided to
enable it by default in the capabilities in the driver.
- There are some 1G modules used by some customers, a couple
small tweaks to properly support those in the media code.
- A note: we have now done some testing of TSO6 and using
LRO with IPv6 and it all works great!! Seeing line rate
in both directions in best cases. Thanks bz for your
excellent work!!
current CPU and not always CPU 0.
This has the added benefit of reducing a huge amount of spinlock
contention on the callout_cpu spinlock for CPU 0.
Sponsored by: Intel
if unused in that configuration mixer at NID 15 is muted. Probably CODEC
incorrectly reports its internal connections. Hide that muter from the
driver to avoid muting and make built-in speaker work.
There are several different CODECs sharing this ID and I have not enough
information about them and the bug to implement more universal solution.
Tested by: Big Yuuta <init.py@gmail.com>
MFC after: 2 weeks
* Add some more ANI spur immunity levels.
* For AR5111 radios attached to an AR5212, limit the 5GHz channels
that are available. A later revision of the AR5111 supports the 4.9GHz
PSB channels but right now there's no check in place for the radio
revision.
If someone wants PSB support on AR5212+AR5111 radios then please let
me know and I'll add the relevant version check.
Obtained from: Qualcomm Atheros
the internet as "AR9380 and later which didn't get its PCI ID written
in at power-on", so it's hardly an unknown constant.
Obtained from: Qualcomm Atheros
this was designed to keep duplicate null vlan tags from
being added. When doing vlans purely via the switch
this problem will occur. Reported by external customer.
in some very degenerate conditions.
However, until ath_rate_form_aggr() is taught to not form aggregates
if ANY selected rate is non-MCS, this can't yet be enabled.
So, just add a comment.
I've tried serialising TX using queues and such but unfortunately
due to how this interacts with the locking going on elsewhere in the
networking stack, the TX task gets delayed, resulting in quite a
noticable throughput loss:
* baseline TCP for 2x2 11n HT40 is ~ 170mbit/sec;
* TCP for TX task in the ath taskq, with the RX also going on - 80mbit/sec;
* TCP for TX task in a separate, second taskq - 100mbit/sec.
So for now I'm going with the Linux wireless stack approach - lock tx
early. The linux code does in the wireless stack, before the 802.11
state stuff happens and before it's punted to the driver.
But TX locking needs to also occur at the driver layer as the TX
completion code _also_ begins to drain the ifnet TX queue.
Whilst I'm here, add some KTR traces for the TX path.
Note:
* This really should be done at the net80211 layer (as well, at least.)
But that'll have to wait for a little more thought to happen.
to the initial SCSI INQUIRY command, enable all quirks.
This fixes detection of some Transcend TS2GUFM devices.
MFC after: 1 week
Reported by: Michael Dexter
executed. This means past the point where userret() is generally
executed.
Skip the td_pinned check if a callchain tracing is currently happening
and add a more robust check to pmc_capture_user_callchain() in order to
catch td_pinned leak past ast() in hwpmc case.
Reported and tested by: fabient
MFC after: 1 week
X-MFC: r240246
with the real value in regular way if sensing is supported. This fixes
minor inconsistency when playback redirection appeared in undefined state
on boot if headphones were not connected.
payload. This means driver has to split a TX buffer into two
pieces of TX buffers when the TX buffer contains both
ethernet/IP/TCP header and partial TCP payload. The controller
does not require all header should be in a TX buffer but driver
forced it to compute IP/TCP header size/offset which is required
parameter to configure DMA descriptor for TSO.
While here, slightly reorder DMA descriptor setup to enhance
readability and remove unnecessary code for TSO(upper stack never
requests TSO when the frame length is less than or equal to MTU).
Reported by: Yamagi Burmeister <lists <> yamagi dot org>
Tested by: Yamagi Burmeister <lists <> yamagi dot org>
MFC After: 1 week
the power save queue.
* introduce some new ATH_NODE lock protected fields, tracking the
net80211 psq and TIM state;
* when doing buffer transitions - ie, when sending and completing
buffers - check the state of the SWQ and update the TIM appropriately.
* when clearing the TIM bit, if the SWQ is not empty then delay clearing
it.
This is racy, but it's no less racy than the current net80211 power
save queue management code. Specifically, with multiple TX threads,
it's quite plausible that parallel state updates will race and the
TIM will be left in an inconsistent state. I'll address that in
a follow-up commit.
support with ath(4) and VIMAGE.
Right now the VIMAGE code doesn't supply a default vnet context during:
* hotplug attach;
* any device detach.
It special cases kldload/boot time probing (by setting the context to
vnet0) but that doesn't occur when probing devices during a bus rescan -
eg, adding a cardbus card.
These will eventually go away when the VIMAGE support extends to providing
default contexts to hotplug attach/detach.
audio devices. This endpoint gives clues to the USB host about the
actual data rate on asynchronous endpoints and makes the more
expensive USB audio devices usable under FreeBSD.
The Linux USB audio driver was used as reference for the
automagic shift of the received value.
MFC after: 1 week
fragment rate lookups correctly, add a comment describing exactly that.
The assumption in the fragment duration code is the duration of the next
fragment will match the rate used by the current fragment. But I think
a rate lookup is being done for _each_ fragment. For older pre-sample
rate control this would almost always be the case, but for sample
it may be incorrect more often then correct.
occurs if t3_sge_alloc_qset fails and then t3_free_qset attempts to
destroy an uninitialized mutex.
Submitted by: Vijay Singh <vijju dot singh at gmail>
MFC after: 3 days
RocketRAID 4500 series.
Many thanks to HighPoint Technologies for their continued support
of FreeBSD!
Submitted by: HighPoint Technologies
MFC after: 3 days
appear on which interface. This fixes detection of some USB audio adapters.
Also increase the channel limit for FULL speed devices to 4 channels.
Tested by: gavin
MFC after: 1 week
Also update the port reset time from 250ms to 50ms. Some USB devices
have a hard limit in hardware at 222ms for the port reset time and will
not enumerate unless this delay is closer to the usb.org defined value.
This patch can fix enumeration with some USB devices.
Tested by: Guido van Rooij
Submitted by: Nick Hibma
MFC after: 1 week
link at a lower speed so enabling it for fiber adapters is wrong.
Fix the issue by setting BGE_PHY_NO_WIRESPEED such that brgphy(4)
wouldn't enable the feature.
While I'm here move PHY specific feature/bug configuration to new
location(just before mii attach) for readability.
device drivers that used to provide this feature.
This is a subset of 241856 (which was reverted)
Reviewed by: des
Approved by: cperciva (implicit)
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
parent adapter's _DOD list, only check the low 16 bits of both _ADR and
_DOD. The language in the ACPI spec seems to indicate that the _ADR values
should exactly match the entries in _DOD. However, I assume that the
masking added to _DOD values was added to work around some known busted
machines (the commit history doesn't indicate either way), and the ACPI
spec does require that the low 16 bits are unique for all video outputs,
so only check the low 16 bits should be fine.
This fixes recognition of video outputs that use the new standardized
device ID scheme in ACPI 3.0 that set bit 31 such as certain Dell laptops.
Tested by: Juergen Lock nox jelal kn-bremen de
MFC after: 3 days
(Model 0x2D /* Per Intel document 253669-044US 08/2012. */)
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris@ fabient@
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
that revises the netmap memory allocator so that the
various parameters (number and size of buffers, rings, descriptors)
can be modified at runtime through sysctl variables.
The changes become effective when no netmap clients are active.
The API is mostly unchanged, although the NIOCUNREGIF ioctl now
does not bring the interface back to normal mode: and you
need to close the file descriptor for that.
This change was necessary to track who is using the mapped region,
and since it is a simplification of the API there was no
incentive in trying to preserve NIOCUNREGIF.
We will remove the ioctl from the kernel next time we need
a real API change (and version bump).
Among other things, buffer allocation when opening devices is
now much faster: it used to take O(N^2) time, now it is linear.
Submitted by: Giuseppe Lettieri
doesn't automatically clear when VDD rises above Vlow again and needs to be
cleared manually. However, apparently this needs all of the time registers
to be set, i.e. pcf8563_settime(), and not just PCF8563_R_SECOND in order
for PCF8563_R_SECOND_VL to stick. Thus, we just issue a warning during
pcf8563_attach() rather than failing with ENXIO in case it is set.
MFC after: 3 days
This eliminates the need to manage queue depth at the nvd(4) level for
Chatham prototype board workarounds, and also adds the ability to
accept a number of requests on a single qpair that is much larger
than the number of trackers allocated.
Sponsored by: Intel
nvme_ctrlr_submit_io_request().
While here, also fix case where a uio may have more than 1 iovec.
NVMe's definition of SGEs (called PRPs) only allows for the first SGE to
start on a non-page boundary. The simplest way to handle this is to
construct a temporary uio for each iovec, and submit an NVMe request
for each.
Sponsored by: Intel
from an NVMe consumer.
This allows us to mostly build NVMe command buffers without holding the
qpair lock, and also allows for future queueing of nvme_request objects
in cases where the submission queue is full and no nvme_tracker objects
are available.
Sponsored by: Intel
This simplifies the driver significantly where it is constructing
commands to be submitted to hardware. By reducing the number of
PRPs (NVMe parlance for SGE) from 128 to 32, it ensures we do not
allocate too much memory for more common smaller I/O sizes, while
still supporting up to 128KB I/O sizes.
This also paves the way for pre-allocation of nvme_tracker objects
for each queue which will simplify the I/O path even further.
Sponsored by: Intel
around the problem where high speed interfaces (such as ixgbe(4))
are not able to report real ifi_baudrate. bascially, take a spare
byte from struct if_data and use it to store ifi_baudrate power
factor. in other words,
real ifi_baudrate = ifi_baudrate * 10 ^ ifi_baudrate power factor
this should be backwards compatible with old binaries. use ixgbe(4)
as an example on how drivers would set ifi_baudrate power factor
Discussed with: kib, scottl, glebius
MFC after: 1 week
now use function calls:
if_clone_simple()
if_clone_advanced()
to initialize a cloner, instead of macros that initialize if_clone
structure.
Discussed with: brooks, bz, 1 year ago
sdchi encapsulates a generic SD Host Controller logic that relies on
actual hardware driver for register access.
sdhci_pci implements driver for PCI SDHC controllers using new SDHCI
interface
No kernel config modifications are required, but if you load sdhc
as a module you must switch to sdhci_pci instead.
- Use device_printf() and device_get_unit() instead of storing the unit
number in the softc.
- Remove use of explicit bus space handles and tags.
- Remove the global dpt_softcs list and use devclass_get_device() instead.
- Use pci_enable_busmaster() rather than frobbing the PCI command register
directly.
Tested by: no one
- Use device_printf() and device_get_unit() instead of storing the unit
number in the softc.
- Remove use of explicit bus space handles and tags.
- Return an errno value from bt_eisa_attach() if an error occurs rather
than -1.
- Use BUS_PROBE_DEFAULT rather than 0.
Tested by: no one
