This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
symbolic link to a directory for the target as a symbolic link instead of
a directory. This makes it possible to atomically update a symbolic
link using rename().
Reviewed by: gj
MFC after: 2 weeks
When waiting for child processes using "wait" or if "set -T" is in effect, a
signal interrupts the wait. Make sure there is no window where the signal
handler may be invoked (setting a flag) just before going to sleep.
There is a similar race condition in the shell language, but scripts can
avoid it by exiting from the trap handler or enforcing synchronization using
a fifo.
If SIGCHLD is not trapped, a signal handler must be installed for it. Only
install this handler for the duration of the wait to avoid triggering
unexpected [EINTR] errors elsewhere.
Note that for some reason only SIGINT and SIGQUIT interrupt a "wait"
command. This remains the case.
Examples:
export x=~
now expands the tilde
local y=$1
is now safe, even if $1 contains IFS characters or metacharacters.
For a word to "look like an assignment", it must start with a name followed
by an equals sign, none of which may be quoted.
The special treatment applies when the first word (potentially after
"command") is "export", "readonly" or "local". There may be quoting
characters but no expansions. If "local" is overridden with a function there
is no special treatment ("export" and "readonly" cannot be overridden with a
function).
If things like
local arr=(1 2 3)
are ever allowed in the future, they cannot call a "local" function. This
would either be a run-time error or it would call the builtin.
This matches Austin Group bug #351, planned for the next issue of POSIX.1.
PR: bin/166771
On recent versions of NetBSD's libedit, el_gets
now sets el_len to -1 on error so we can
distinguish between a NULL string and an error.
This fixes sh from exiting with newer versions
of libedit now allowing EINTR to return.
Obtained from: NetBSD
Reviewed by: jilles
MFC after: 3 weeks
directory entry then use the struct stat from that instead of doing
it again, and skip the rm_overwrite() call if fts_read() indicated
that the entry couldn't be a regular file.
Obtained from: OpenBSD
MFC after: 1 week
that the file we have opened is the one we expected. Also open in
non-blocking mode to avoid a potential hang with FIFOs.
Obtained from: NetBSD via OpenBSD
1. Avoid a cd back into ${.CURDIR} to run mkbuiltins when we know make
will first cd into ${.OBJDIR}. Keep the cwd to what make sets it to.
2. Don't tell mkbuiltins where to write to (= ${.OBJDIR}), but where to
get sources from (= ${.CURDIR}). This to compensate for point 1.
This fixes a problem with bmake's mk files that optimize ${.OBJDIR} to
expand to "." after changing cwd, not taking into account that the
target is pretty much undoing that and not getting the full path to the
object tree anymore.
scripts the way sysctl(8) is. The -N option, like in sysctl(8),
displays only the kenv names, not their values. The -v option prints an
individual kenv variable name with its value as name="value". This is
the inverse of sysctl(8)'s -n flag, since the default behaviour of
kenv(1) is already like sysctl(8) -n.
Submitted by: Garrett Cooper < yanegomi AT gmail DOT com >
MFC after: 1 week
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
This uses vfork() for simple commands and command substitutions containing a
single simple command, invoking an external program under certain conditions
(no redirections or variable assignments, non-interactive shell, no job
control). These restrictions limit the amount of code executed in a vforked
child.
There is a large speedup (for example 35%) in microbenchmarks. The
difference in buildkernel is smaller (for example 0.5%) but still
statistically significant. See
http://lists.freebsd.org/pipermail/freebsd-hackers/2012-January/037581.html
for some numbers.
The use of vfork() can be disabled by setting a variable named
SH_DISABLE_VFORK.
In the first command of a 'for', $? should be the exit status of the last
pipeline (command substitution in the word list or command before 'for'),
not always 0.
Before this fix, only the first statement of the trap was executed if
evalskip was set. This is for example the case when:
o "-e" is set for this shell
o a trap is set on EXIT
o a function returns 1 and causes the script to abort
Reviewed by: jilles
MFC after: 2 weeks
Also, rework evalcase() to not evaluate any tree. Instead, return the
NCLISTFALLTHRU node and handle it in evaltree().
Fixed bugs:
* If a ;& list with non-zero exit status is followed by an empty ;; or final
list, the exit status of the case command should be equal to the exit
status of the ;& list, not 0.
* An empty ;& case should not reset $?.
* If no pattern is matched, POSIX says the exit status shall be 0 (even if
there are command substitutions).
* If a pattern is matched and there are no command substitutions, the first
command should see the $? from before the case command, not always 0.
The errno message display added in r222292 did not take attempting to
cd to a non-directory or something that cannot be stat()ed into account.
PR: bin/164070
MFC after: 10 days
This improves performance for globs where a slash or another component
follows a component with metacharacters by eliminating unnecessary attempts
to open directories that are not.
This is not necessary: errors are already caught in evalbackcmd() and
forcelocal handles changes to variables.
Note that this depends on r223024.
MFC after: 4 weeks
Free expanded case text before executing commands.
Remove impossible evalskip checks (expanding an argument cannot set
evalskip anymore since $(break) and the like are properly executed in a
subshell environment).
For these simple utilities, it doesn't harm to make all global variables
static. In fact, this allows the compiler to perform better forms of
optimisation and analysis.
display() to calculate column widths, but was not initialized in
main(). This resulted in a division by zero.
Noticed by: Michael Butler <imb@protected-networks.net>
- In the argc == 0 case, just populate the mount list as before, but
do not calculate widths, update totals or print anything.
- In the argv > 0 case, collect information about the requested file
systems and store it in the mount list, but do not calculate
widths, update totals or print anything.
- In either case, once all the information has been collected,
iterate once through the mount list to calculate widths and totals,
then once more to print everything.
This also fixes two bugs: firstly, column widths were not calculated
correctly if more than one file system was specified on the command
line; and secondly, file systems with MNT_IGNORE were included in the
totals even if -a was not specified.
Noticed by: Paul Schenkeveld
MFC after: 3 weeks
- there's no reason the semantics of the -x flag are being explained in
the -a flag description
- be more precise regarding the relation between the -a flag and the
security.bsd.see_other_uids sysctl
- describe the format of the -t flag's argument
- 'con' no longer is a possible entry in the 'TT' column
- explain that the 'TT' column refers to pseudo-terminals via mere numbers
- add a hint in the 'tt' keyword description that a keyword 'tty' exists,
which will give the full terminal pathname
Submitted by: arundel (via docs@) (original)
MFC after: 1 week
With-MFC: 225908
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
Because sh executes commands in subshell environments without forking in
more and more cases (particularly from 8.0 on), it makes sense to describe
subshell environments more precisely using ideas from POSIX, together with
some FreeBSD-specific items.
In particular, the hash and times builtins may not behave as if their state
is copied for a subshell environment while leaving the parent shell
environment unchanged.
to re-establishment of 64bit arithmetic, but is committed separately, to
not obscure that conversion. This commit does not change the observed
behaviour of expr in any way. Style will be fixed in a follow-up commit.
again. This brings back the behaviour of expr in FreeBSD-4, which had been
reverted due to an assumed incompatbility with POSIX.1 for FreeBSD-5.
This issue has been discussed in the freebsd-standards list, and the
consensus was, that POSIX.1 is in fact not violated by this extension,
since it affects only cases of POSIX undefined behaviour (overflow of
signed long).
Other operating systems did upgrade their versions of expr to support
64bit range, after it had been initially brought to FreeBSD. They have
used it for a decade without problems, meanwhile.
The -e option is retained, but it will only select less strict checking
of numeric parameters (leading white-space, leading "+" are allowed and
skipped, an empty string is considered to represent 0 in numeric context.)
The call of check_utility_compat() as a means of establishing backwards
compatibility with FreeBSD-4 is considered obsolete, but preserved in
this commit. It is expected to be removed in a later revision of this
file.
Reviewed by: bde, das, jilles
MFC after: 2 month (those parts that do not violate POLA)
* Shell patterns are also for ${var#pat} and the like.
* An '!' by itself will not trigger pathname generation so do not call it a
meta-character, even though it has a special meaning directly after an
'['.
* Character ranges are locale-dependent.
* A '^' will complement a character class like '!' but is non-standard.
MFC after: 1 week
POSIX requires a -h option to sh and set, to locate and remember utilities
invoked by functions as they are defined. Given that this
locate-and-remember process is optional elsewhere, it seems safe enough to
make this option do nothing.
POSIX does not specify a long name for this option. Follow ksh in calling it
"trackall".
Replacing ;; with the new control operator ;& will cause the next list to be
executed as well without checking its pattern, continuing until a list ends
with ;; or until the end of the case statement. This is like omitting
"break" in a C "switch" statement.
The sequence ;& was formerly invalid.
This feature is proposed for the next POSIX issue in Austin Group issue
#449.
The eval special builtin now runs the code with EV_EXIT if it was run
with EV_EXIT itself.
In particular, this eliminates one fork when a command substitution contains
an eval command that ends with an external program or a subshell.
This is similar to what r220978 did for functions.
Have mkbuiltins write the prototypes for the *cmd functions to builtins.h
instead of builtins.c and include builtins.h in more .c files instead of
duplicating prototypes for *cmd functions in other headers.
In optimized command substitution, save and restore any variables changed by
expansions (${var=value} and $((var=assigned))), instead of trying to
determine if an expansion may cause such changes.
If $! is referenced in optimized command substitution, do not cause jobs to
be remembered longer.
This fixes $(jobs $!) again, simplifies the man page and shortens the code.
When I added UTF-8 support in r221646, the LC_COLLATE-based ordering broke
because of sign extension of char.
Because of libc restrictions, this does not work for UTF-8. For UTF-8
locales, ranges always use character code order.
In most cases, login shells are started from the home directory, but not in
all, such as xterm -ls.
This commit depends on r222957 for read_profile() performing parameter
expansion.
PR: bin/50569
The function name expandstr() and the general idea of doing this kind of
expansion by treating the text as a here document without end marker is from
dash.
All variants of parameter expansion and arithmetic expansion also work (the
latter is not required by POSIX but it does not take extra code and many
other shells also allow it).
Command substitution is prevented because I think it causes too much code to
be re-entered (for example creating an unbounded recursion of trace lines).
Unfortunately, our LINENO is somewhat crude, otherwise PS4='$LINENO+ ' would
be quite useful.
The "exp" builtin is undocumented, non-standard and not very useful.
If exp's return value is not used, something like
VAR=$(exp EXPRESSION)
is equivalent to
VAR=$((EXPRESSION))
except that errors in the expression are fatal and quoting special
characters is not needed in the latter case.
If exp's return value is used, something like
if exp EXPRESSION >/dev/null
can be replaced by
if [ $((EXPRESSION)) -ne 0 ]
with similar differences.
The exp-run showed that "let" is close enough to bash's and ksh's builtin
that removing it would break a few ports. Therefore, "let" remains in 9.x.
PR: bin/104432
Exp-run done by: pav (with some other sh(1) changes)
CDPATH should be ignored not only for pathnames starting with '/' but also
for pathnames whose first component is '.' or '..'.
The man page already describes this behaviour.
If IFS is null, unquoted $@/$* should still expand to separate words.
This differs from quoted $@ (which does not depend on IFS) in that pathname
generation is performed and empty words are removed.
If the length of a directory in PATH together with the given filename
exceeded FILENAME_MAX (which may happen even for pathnames that work), a
static buffer was overflown.
The static buffer is unnecessary, we can use the stalloc() stack.
Obtained from: NetBSD
MFC after: 1 week
This reflects failure to determine the pathname of the new directory in the
exit status (1). Normally, cd returns successfully if it did chdir() and the
call was successful.
In POSIX, -e only has meaning with -P; because our -L is not entirely
compliant and may fall back to -P mode, -e has some effect with -L as well.
This is sometimes used with eval or old-style command substitution, and most
shells other than ash derivatives allow it.
It can also be used with scripts that violate POSIX's requirement on the
application that they end in a newline (scripts must be text files except
that line length is unlimited).
Example:
v=`cat <<EOF
foo
EOF`
echo $v
This commit does not add support for the similar construct with new-style
command substitution, like
v=$(cat <<EOF
foo
EOF)
This continues to require a newline after the terminator.
Because we have no iconv in base, support for other charsets is not
possible.
Note that \u/\U are processed using the locale that was active when the
shell started. This is necessary to avoid behaviour that depends on the
parse/execute split (for example when placing braces around an entire
script). Therefore, UTF-8 encoding is implemented manually.
?, [...] patterns match codepoints instead of bytes. They do not match
invalid sequences. [...] patterns must not contain invalid sequences
otherwise they will not match anything. This is so that ${var#?} removes the
first codepoint, not the first byte, without putting UTF-8 knowledge into
the ${var#pattern} code. However, * continues to match any string and an
invalid sequence matches an identical invalid sequence. (This differs from
fnmatch(3).)
This ensures that mbrtowc(3) can be used directly once it has been verified
that there is no CTL* byte. Dealing with a CTLESC byte within a multibyte
character would be complicated.
The new values do occur in iso-8859-* encodings. This decreases efficiency
slightly but should not affect correctness.
Caveat: Updating across this change and rebuilding without cleaning may
yield a subtly broken sh binary. By default, make buildworld will clean and
avoid problems.
A string between $' and ' may contain backslash escape sequences similar to
the ones in a C string constant (except that a single-quote must be escaped
and a double-quote need not be). Details are in the sh(1) man page.
This construct is useful to include unprintable characters, tabs and
newlines in strings; while this can be done with a command substitution
containing a printf command, that needs ugly workarounds if the result is to
end with a newline as command substitution removes all trailing newlines.
The construct may also be useful in future to describe unprintable
characters without needing to write those characters themselves in 'set -x',
'export -p' and the like.
The implementation attempts to comply to the proposal for the next issue of
the POSIX specification. Because this construct is not in POSIX.1-2008,
using it in scripts intended to be portable is unwise.
Matching the minimal locale support in the rest of sh, the \u and \U
sequences are currently not useful.
Exp-run done by: pav (with some other sh(1) changes)
Note that this only applies to variables that are actually used.
Things like (0 && unsetvar) do not cause an error.
Exp-run done by: pav (with some other sh(1) changes)
In particular, this makes things like ${#foo[0]} and ${#foo[@]} errors
rather than silent equivalents of ${#foo}.
PR: bin/151720
Submitted by: Mark Johnston
Exp-run done by: pav (with some other sh(1) changes)
For backgrounded pipelines and subshells, the previous value of $? was being
preserved, which is incorrect.
For backgrounded simple commands containing a command substitution, the
status of the last command substitution was returned instead of 0.
If fork() fails, this is an error.
If the -p option is turned off, privileges from a setuid or setgid binary
are dropped. Make sure to check if this succeeds. If it fails, this is an
error which will cause the shell to abort except in interactive mode or if
'command' was used to make 'set' or an outer 'eval' or '.' non-special.
Note that taking advantage of this feature and writing setuid shell scripts
seems unwise.
MFC after: 1 week
If EV_EXIT causes an exit, use the exception mechanism to unwind
redirections and local variables. This way, if the final command is a
redirected command, an EXIT trap now executes without the redirections.
Because of these changes, EV_EXIT can now be inherited by the body of a
function, so do so. This means that a function no longer prevents a fork
before an exec being skipped, such as in
f() { head -1 /etc/passwd; }; echo $(f)
Wrapping a single builtin in a function may still cause an otherwise
unnecessary fork with command substitution, however.
An exit command or -e failure still invokes the EXIT trap with the
original redirections and local variables in place.
Note: this depends on SHELLPROC being gone. A SHELLPROC depended on
keeping the redirections and local variables and only cleaning up the
state to restore them.
This is only a problem if IFS contains digits, which is unusual but valid.
Because of an incorrect fix for PR bin/12137, "${#parameter}" was treated
as ${#parameter}. The underlying problem was that "${#parameter}"
erroneously added CTLESC bytes before determining the length. This
was properly fixed for PR bin/56147 but the incorrect fix was not backed
out.
Reported by: Seeker on forums.freebsd.org
MFC after: 2 weeks
POSIX does not require the shell to fork for a subshell environment, and we
use that possibility in various ways (command substitutions with a single
command and most subshells that are the final command of a shell process).
Therefore do not tie subshells to forking in the man page.
Command substitutions with expansions are a bit strange, causing a fork for
$(...$(($x))...) because $x might expand to y=2; they will probably be
changed later but this is how they work now.
These already worked: $# ${#} ${##} ${#-} ${#?}
These now work as well: ${#+word} ${#-word} ${##word} ${#%word}
There is an ambiguity in the standard with ${#?}: it could be the length of
$? or it could be $# giving an error in the (impossible) case that it is not
set. We continue to use the former interpretation as it seems more useful.
New features:
* proper lazy evaluation of || and &&
* ?: ternary operator
* executable is considerably smaller (8K on i386) because lex and yacc are
no longer used
Differences from dash:
* arith_t instead of intmax_t
* imaxdiv() not used
* unset or null variables default to 0
* let/exp builtin (undocumented, will probably be removed later)
Obtained from: dash
* In {(...) <redir1;} <redir2, do not drop redir1.
* Maintain the difference between (...) <redir and {(...)} <redir:
In (...) <redir, the redirection is performed in the child, while in
{(...)} <redir it should be performed in the parent (like {(...); :;}
<redir)
POSIX requires this and it is simpler than the previous code that remembered
command locations when appending directories to PATH.
In particular,
PATH=$PATH
is no longer a no-op but discards all cached command locations.
If execve() returns an [ENOEXEC] error, check if the file is binary before
trying to execute it using sh. A file is considered binary if at least one
of the first 256 bytes is '\0'.
In particular, trying to execute ELF binaries for the wrong architecture now
fails with an "Exec format error" message instead of syntax errors and
potentially strange results.
These are called "shell procedures" in the source.
If execve() failed with [ENOEXEC], the shell would reinitialize itself
and execute the program as a script. This requires a fair amount of code
which is not frequently used (most scripts have a #! magic number).
Therefore just execute a new instance of sh (_PATH_BSHELL) to run the
script.
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
* There is no plan for an alternative to the command "set".
* Attempting to unset a readonly variable has not raised an error for quite
a while, so the order of unsetting a variable and a function with the same
name does not matter.
MFC after: 1 week
When a foreground job exits on a signal, a message is printed to stdout
about this. The buffer was not flushed after this which could result in the
message being written to the wrong file if the next command was a builtin
and had stdout redirected.
Example:
sh -c 'kill -9 $$'; : > foo; echo FOO:; cat foo
Reported by: gcooper
MFC after: 1 week
This is useful so that it is easier to exit on a signal than to reset the
trap to default and resend the signal. It matches ksh93. POSIX says that
'exit' without args from a trap action uses the exit status from the last
command before the trap, which is different from 'exit $?' and matches this
if the previous command is assumed to have exited on the signal.
If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default
action for the signal is to ignore it, a normal _exit(2) is done with exit
status 128+signal_number.
* Make 'trap --' do the same as 'trap' instead of nothing.
* Make '--' stop option processing (note that '-' action is not an option).
Side effect: The error message for an unknown option is different.
All builtins are now always found before a PATH search.
Most ash derivatives have an undocumented feature where the presence of an
entry "%builtin" in $PATH will cause builtins to be checked at that point of
the PATH search, rather than before looking at any directories as documented
in the man page (very old versions do document this feature).
I am removing this feature from sh, as it complicates the code, may violate
expectations (for example, /usr/bin/alias is very close to a forkbomb with
PATH=/usr/bin:%builtin, only /usr/bin/builtin not being another link saves
it) and appears to be unused (all the %builtin google code search finds is
in some sort of ash source code).
Note that aliases and functions took and take precedence above builtins.
Because aliases work on a lexical level they can only ever be overridden on
a lexical level (quoting or preceding 'builtin' or 'command'). Allowing
override of functions via PATH does not really fit in the model of sh and it
would work differently from %builtin if implemented.
Note: POSIX says special builtins are found before functions. We comply to
this because we do not allow functions with the same name as a special
builtin.
Silence from: freebsd-hackers@ (message sent 20101225)
Discussed with: dougb
It should use the original exit status, just like falling off the
end of the trap handler.
Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
An error message is written, the builtin is not executed, nonzero exit
status is returned but the shell does not abort.
This was already checked for special builtins and external commands, with
the same consequences except that the shell aborts for special builtins.
Obtained from: NetBSD
Change the criterion for builtins to be safe to execute in the same process
in optimized command substitution from a blacklist of only cd, . and eval to
a whitelist.
This avoids clobbering the main shell environment such as by $(exit 4) and
$(set -x).
The builtins jobid, jobs, times and trap can still show information not
available in a child process; this is deliberately permitted. (Changing
traps is not.)
For some builtins, whether they are safe depends on the arguments passed to
them. Some of these are always considered unsafe to keep things simple; this
only harms efficiency a little in the rare case they are used alone in a
command substitution.
If SIGINT arrived at exactly the right moment (unlikely), an exception
handler in a no longer active stack frame would be called.
Because the old handler was not used in the normal path, clang thought it
was a dead value and if an exception happened it would longjmp() to garbage.
This caused builtins/fc1.0 to fail if histedit.c was compiled with clang.
MFC after: 1 week