This driver update has no corresponding ice_ddp update, and doesn't
contain very many functional changes:
- Some refactoring for future SR-IOV PF support
- Various minor fixes
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D39821
This patch fixes TCP connection hangs for 1 rxq and 1 txq without rxcsum
enabled. Documentation for 10G cards and other drivers suggest enabling
rxcsum for RSS and disabling otherwise. When PCSD bit is not set then
fragment checksum and IP identification are reported in the rx
descriptor. When PCSD bit is set then RSS hash value is reported in the
rx descriptor. RSS and RX IPP checksum are mutually exclusive.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
PR: 268910
Reviewed by: erj@
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38621
The intent is to set the value to UINT32_MAX, not to |= UINT32_MAX.
Happily the intent (ensure that we do not send further packets) is
achieved either way.
Reported by: markj
Sponsored by: Rubicon Communications, LLC ("Netgate")
When checking if the spinlock count is correct in a data abort we can
panic without printing the registers. These are useful to debug the
abort, e.g. by giving the fault address register.
Reviewed by: kib
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40228
We don't print leading zeros for other registers, so do the same with
ESR_EL1.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40129
Hardware with more than 256 CPU cores is now available and will become
increasingly common. Bump CPU_MAXSIZE (used for userland cpuset_t
sizing) to 1024 to define the ABI for FreeBSD 14.
This change is reapplied after a change to decouple cpuset from bhyve:
commit e17eca3276 ("vmm: Avoid embedding cpuset_t ioctl ABIs").
PR: 269572, 271213 [exp-run]
Reviewed by: mjg, jhb
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39941
(cherry picked from commit 76887e84be)
This change is a name change only. TCP Request tracking can track sendfile and even non-sendfile requests. The
names however in the current code use http, and they should not. The feature is not http specific. Lets change the
name so they more properly reflect whats going on. This also fixes conflicts with http_req which caused application pain.
Reviewed by: tuexen
Sponsored by: Netflix Inc
Differential Revision:https://reviews.freebsd.org/D40229
We already do plenty to announce the different CPUs in dmesg. Follow the
ACPI CPU strategy of reporting the first CPU device, but quieting the
rest for non-verbose boot. This cuts down slightly on dmesg output.
Reviewed by: manu, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40243
These will be used by bhyve to manage the host VFP registers, e.g.
saving the host state before entering a guest.
Reviewed by: markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40130
These will be used by bhyve
Reviewed by: markj
Sponsored by: Arm Ltd
Sponsored by: Innovate UK
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40128
Introduce macro for PHYS_TO_PTE, setting the groundwork for future
support of various Arm VMSA extensions.
For extensions such as 52-bit VA/PA (FEAT_LPA2), the representation of
an address between a PTE and PA are not equivalent. This macro will
allow converting between the different representations.
Currently PHYS_TO_PTE is a NOP. Replace all instances where we go from
PA to PTE with new PHYS_TO_PTE macro.
Reviewed by: markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39828
Introduce macro for PTE_TO_PHYS, setting the groundwork for future
support of various Arm VMSA extensions.
For extensions such as 52-bit VA/PA (FEAT_LPA2), the representation of
an address between a PTE and PA are not equivalent. This macro will
allow converting between the different representations.
Currently going from PTE to PA is achieved by masking off the upper and
lower attributes. Retain this behaviour but replace all instances with
the new macro instead.
Reviewed by: alc, markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39827
A wireless dirver is requesting release from the result of
init_utsname(). Populate the field on startup.
MFC after: 10 days
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D40248
Add function used by a wireless driver.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D40249
Commit 0bda8d3e9f ("vmm: permit some IPIs to be handled by userspace")
embedded cpuset_t into the vmm(4) ioctl ABI. This was a mistake since
we otherwise have some leeway to change the cpuset_t for the whole
system, but we want to keep the vmm ioctl ABI stable.
Rework IPI reporting to avoid this problem. Along the way, make VM_RUN
a bit more efficient:
- Split vmexit metadata out of the main VM_RUN structure. This data is
only written by the kernel.
- Have userspace pass a cpuset_t pointer and cpusetsize in the VM_RUN
structure, as is done for cpuset syscalls.
- Have the destination CPU mask for VM_EXITCODE_IPIs live outside the
vmexit info structure, and make VM_RUN copy it out separately. Zero
out any extra bytes in the CPU mask, like cpuset syscalls do.
- Modify the vmexit handler prototype to take a full VM_RUN structure.
PR: 271330
Reviewed by: corvink, jhb (previous versions)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40113
As of clang 16, the -ftrivial-auto-var-init=zero option no longer needs
-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
to enable the option. Only add it for older clang versions.
PR: 271047
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D40208
The zone is used solely to provide KVA for mapping BIOs so that we can
pass mapped buffers to VOP_READ and VOP_WRITE. Currently we preallocate
nswbuf/10 bufs for this purpose during boot.
The intent was to limit KVA usage on 32-bit systems, but the
preallocation means that we in fact consumed more KVA than needed unless
one has more than nswbuf/10 (typically 25) vnode-backed MD devices
in existence, which I would argue is the uncommon case.
Meanwhile, all I/O to an MD is handled by a dedicated thread, so we can
instead simply preallocate the KVA region at MD device creation time.
Event: BSDCan 2023
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D40215
Architectures that are not included in the #ifdef won't be able to
compile libdtrace. This was tested on an ARM64 build. If the ifdef is
removed, libdtrace can be compiled with no problems, otherwise it fails
at libdtrace.
Reviewed by: markj
Approved by: markj (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39948
if_ovpn already notified userpsace when there was a risk of sequence
number re-use, but it trusted userspace to actually rotate the key.
Convert the internal sequence number counter to 64 bits so we can detect
overflows and then refuse to send packets.
Event: BSDCan 2023
Reviewed by: Leon Dang <ldang@netgate.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D40187
The current implementation of KINST_TRAMP_INIT is working only on amd64,
where the breakpoint instruction is one byte long, which might not be
the case for other architectures (e.g in RISC-V it's either 2 or 4
bytes). This patch introduces two machine-dependent constants,
KINST_TRAMP_FILL_PATTERN and KINST_TRAMP_FILL_SIZE, which hold the fill
instruction and the size of that instruction in bytes respectively.
Reviewed by: markj
Approved by: markj (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39504
Change the reporting strategy to more closely follow what arm64
implements:
- Always print the one-line CPU summary when a core comes online
- Only print the additional fields (e.g. ISA) when they differ from the
CPU before it
In the common case of identical CPUs this results in informative but
non-repetitive output. For example, in QEMU:
CPU 0 : Vendor=Unspecified Core=Unknown (Hart 0)
marchid=0x80032, mimpid=0x80032
MMU: 0x7<Sv39,Sv48,Sv57>
ISA: 0x112d<Atomic,Compressed,Double,Float,Mult/Div>
real memory = 8589934592 (8192 MB)
avail memory = 8332300288 (7946 MB)
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
CPU 1 : Vendor=Unspecified Core=Unknown (Hart 1)
CPU 2 : Vendor=Unspecified Core=Unknown (Hart 2)
CPU 3 : Vendor=Unspecified Core=Unknown (Hart 3)
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40024
Detect and report the supported MMU for each CPU. Export the
capabilities to the rest of the kernel and use it in pmap_bootstrap() to
check for Sv48 support.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39814
Report the CPU's single-letter ISA extensions in printcpuinfo().
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39813
Modify when and how we perform parsing and reporting. Most notably,
everything now executes on CPU 0.
The de-facto standard way to enumerate CPU features (ISA extensions) on
RISC-V is by parsing each CPU's ISA string. We currently obtain this
information from the device tree, and in the future will be able to pull
it from ACPI tables.
Eliminate the SYSINIT from identcpu.c. We still need to walk the /cpus
list in the device tree, but now do this one CPU at a time, as a step in
the identify_cpu() procedure. This is slightly less error prone, and
allows us to parse ISA features for CPU 0 much earlier.
Make use of the SMP hooks cpu_mp_start() and cpu_mp_announce() to
identify and print secondary CPU info, respectively. This causes
secondary processor identification to be printed much earlier in boot;
everything is done by SI_SUB_CPU, SI_ORDER_THIRD. Adjust some other
printf() calls so that we get enough useful info to debug under
bootverbose.
Reviewed by: markj (slightly earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39811
It is advantageous to have knowledge of ISA features as early as
possible. For example, the presence of newer virtual memory extensions
may be useful to pmap_bootstrap().
To achieve this, split out the printf() parts of identify_cpu() into a
separate function, printcpuinfo(). This latter function will be called
later in boot after the console has been initialized.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39810
Make better use of the RISC-V identification CSRs: mvendorid, marchid,
and mimpid. This code was written before these registers were
well-specified, or even available to the kernel. It currently fails to
recognize any CPU or platform.
Per the privileged specification, mvendorid contains the JEDEC vendor ID,
or zero.
The marchid register denotes the CPU microarchitecture. This is either
one of the globally allocated open-source implementation IDs, or the
field has a custom encoding. Therefore, for known vendors (SiFive) we
can also maintain a list of known marchid values. If we can not give a
name to the CPU but marchid is non-zero, then just print its value in
the report.
The mimpid (implementation ID) could be used in the future to more
uniquely identify the micro-architecture, but it really remains to be
seen how it gets used. For now we just print its value.
Thank you to Danjel Qyteza <danq1222@gmail.com> who submitted an early
version of this change to me, although it has been almost entirely
rewritten.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39809
kinst uses this function as well, but because it is not exported, it
implements its own copy of it. The patch also exposes the function to
userland, so programs that need to use dtrace_disx86() can use this
function instead of rolling their own copies.
Reviewed by: markj
Approved by: markj (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39871
For all PPIs setup earlier than SI_SUB_SMP, PIC_INIT_SECONDARY ends up
cleaning these up for each AP as it comes online. Once they're online,
we don't currently do anything to make sure they're configured for other
APs. Fix it by using smp_rendezvous for the meaty bits of configuring a
PPI, which will just do single-thread behavior before APs are online but
do the right thing for other CPUs after.
While we're here, make sure redistributor config is correct for other
APs as they come online in gic_v3_init_secondary.
Reported/Tested by: Souradeep Chakrabarti (Microsoft/Hyper-V)
Reviewed by: andrew (before slight refactor)
Differential Revision: https://reviews.freebsd.org/D40112
This provides compatibility with ifioctl() version of SIOCAIFADDR.
This change is temporary until the IPv4/IPv6 address handling code
is moved to netinet[6].
The zone has been dead ever since commit
b9e2019755 ("fusefs: rewrite vop_getpages and vop_putpages")
No functional change intended.
Reviewed by: asomers
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D40143
Fix a gcc warning: "to be safe all intermediate pointers in cast from
'...' to '...' must be 'const' qualified [-Wcast-qual]".
Doing what is essentially a __DECONST() adding the uintptr_t gets
rid of the massive amount of warnings we get in LinuxKPI and lets
us see the actual problems a lot better.
This is a follow-up to 74e908b3c6 which
fixed READ_ONCE().
ACCESS_ONCE() seems to be an obsolete KPI these days in Linux and
FreeBSD does not use it either directly so we can entirely remove
it now.
Sponsored by: The FreeBSD Foundation
Suggested by: jhb
Reviewed by: hselasky
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D40084
Move static mutex declaration outside function body, to avoid global
variables being declared on the stack, when using SYSINITs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
The ext2fs does not support disks with sectorsize more 512 bytes.
The main issue is in reading/writing superblock, which is not aligned
with 4k value. Reimplement the superblock reading logic to make it
indifferent to disk logical sector size. The logical sector size
more then page size is not supported, like it is doing on Linux side.
PR: 271105
Reported by: k(at)vodka.home.kg
Reviewed by: pfg
MFC after: 2 week
Differential Revision: https://reviews.freebsd.org/D40047
Try to implement pci_rescan_bus(). pci_rescan_method() is already
doing most of the job. We only have to do the count for the return
value again ourselves.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D40122