process was sucessfully audited. Otherwise, generate the PID
token. This change covers the pid < 0 cases, and pid lookup
failure cases.
Submitted by: wsalamon
Obtained from: TrustedBSD Project
global audit trail configuration. This allows applications consuming
audit trails to specify parameters for which audit records are of
interest, including selecting records not required by the global trail.
Allowing application interest specification without changing the global
configuration allows intrusion detection systems to run without
interfering with global auditing or each other (if multiple are
present). To implement this:
- Kernel audit records now carry a flag to indicate whether they have
been selected by the global trail or by the audit pipe subsystem,
set during record commit, so that this information is available
after BSM conversion when delivering the BSM to the trail and audit
pipes in the audit worker thread asynchronously. Preselection by
either record target will cause the record to be kept.
- Similar changes to preselection when the audit record is created
when the system call is entering: consult both the global trail and
pipes.
- au_preselect() now accepts the class in order to avoid repeatedly
looking up the mask for each preselection test.
- Define a series of ioctls that allow applications to specify whether
they want to track the global trail, or program their own
preselection parameters: they may specify their own flags and naflags
masks, similar to the global masks of the same name, as well as a set
of per-auid masks. They also set a per-pipe mode specifying whether
they track the global trail, or user their own -- the door is left
open for future additional modes. A new ioctl is defined to allow a
user process to flush the current audit pipe queue, which can be used
after reprogramming pre-selection to make sure that only records of
interest are received in future reads.
- Audit pipe data structures are extended to hold the additional fields
necessary to support preselection. By default, audit pipes track the
global trail, so "praudit /dev/auditpipe" will track the global audit
trail even though praudit doesn't program the audit pipe selection
model.
- Comment about the complexities of potentially adding partial read
support to audit pipes.
By using a set of ioctls, applications can select which records are of
interest, and toggle the preselection mode.
Obtained from: TrustedBSD Project
knowledge of user vs. kernel audit records into
audit_worker_process_record(). This largely confines vnode
knowledge to audit_record_write(), but avoids that logic knowing
about BSM as opposed to byte streams. This will allow us to
improve our ability to support real-time audit stream processing
by audit pipe consumers while auditing is disabled, but this
support is not yet complete.
Obtained from: TrustedBSD Project
Break out logic to call audit_record_write() and handle error
conditions into audit_worker_process_record(). This will be the
future home of some logic now present in audit_record_write()
also.
Obtained from: TrustedBSD Project
worker.
Rename audit_commit_cv to audit_watermark_cv, since it is there to
wake up threads waiting on hitting the low watermark. Describe
properly in comment.
Obtained from: TrustedBSD Project
src/sys/security/audit:
- Clarify and clean up AUR_ types to match Solaris.
- Clean up use of host vs. network byte order for IP addresses.
- Remove combined user/kernel implementations of some token creation
calls, such as au_to_file(), header calls, etc.
Obtained from: TrustedBSD Project
pointer prototypes from it into their own typedefs. No functional or
ABI change. This allows policies to declare their own function
prototypes based on a common definition from mac_policy.h rather than
duplicating these definitions.
Obtained from: SEDarwin, SPARTA
MFC after: 1 month
subject: ranges of uid, ranges of gid, jail id
objects: ranges of uid, ranges of gid, filesystem,
object is suid, object is sgid, object matches subject uid/gid
object type
We can also negate individual conditions. The ruleset language is
a superset of the previous language, so old rules should continue
to work.
These changes require a change to the API between libugidfw and the
mac_bsdextended module. Add a version number, so we can tell if
we're running mismatched versions.
Update man pages to reflect changes, add extra test cases to
test_ugidfw.c and add a shell script that checks that the the
module seems to do what we expect.
Suggestions from: rwatson, trhodes
Reviewed by: trhodes
MFC after: 2 months
credential: mac_associate_nfsd_label()
This entry point can be utilized by various Mandatory Access Control policies
so they can properly initialize the label of files which get created
as a result of an NFS operation. This work will be useful for fixing kernel
panics associated with accessing un-initialized or invalid vnode labels.
The implementation of these entry points will come shortly.
Obtained from: TrustedBSD
Requested by: mdodd
MFC after: 3 weeks
branch:
Integrate audit.c to audit_worker.c, so as to migrate the worker
thread implementation to its own .c file.
Populate audit_worker.c using parts now removed from audit.c:
- Move audit rotation global variables.
- Move audit_record_write(), audit_worker_rotate(),
audit_worker_drain(), audit_worker(), audit_rotate_vnode().
- Create audit_worker_init() from relevant parts of audit_init(),
which now calls this routine.
- Recreate audit_free(), which wraps uma_zfree() so that
audit_record_zone can be static to audit.c.
- Unstaticize various types and variables relating to the audit
record queue so that audit_worker can get to them. We may want
to wrap these in accessor methods at some point.
- Move AUDIT_PRINTF() to audit_private.h.
Addition of audit_worker.c to kernel configuration, missed in
earlier submit.
Obtained from: TrustedBSD Project
Add ioctls to audit pipes in order to allow querying of the current
record queue state, setting of the queue limit, and querying of pipe
statistics.
Obtained from: TrustedBSD Project
Change send_trigger() prototype to return an int, so that user
space callers can tell if the message was successfully placed
in the trigger queue. This isn't quite the same as it being
successfully received, but is close enough that we can generate
a more useful warning message in audit(8).
Obtained from: TrustedBSD Project
vnode and a mode and checks if a given access mode is permitted.
This centralises the mac_bsdextended_enabled check and the GETATTR
calls and makes the implementation of the mac policy methods simple.
This should make it easier for us to match vnodes on more complex
attributes than just uid and gid in the future, but for now there
should be no functional change.
Approved/Reviewed by: rwatson, trhodes
MFC after: 1 month
- Include audit_internal.h to get definition of internal audit record
structures, as it's no longer in audit.h. Forward declare au_record
in audit_private.h as not all audit_private.h consumers care about
it.
- Remove __APPLE__ compatibility bits that are subsumed by configure
for user space.
- Don't expose in6_addr internals (non-portable, but also cleaner
looking).
- Avoid nested include of audit.h in audit_private.h.
Obtained from: TrustedBSD Project
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
In the future, we may want to acquire the lock early in the function and
hold it across calls to vn_rdwr(), etc, to avoid multiple acquires.
Spotted by: kris (bugmagnet)
Obtained from: TrustedBSD Project
applications to insert a "tee" in the live audit event stream. Records
are inserted into a per-clone queue so that user processes can pull
discreet records out of the queue. Unlike delivery to disk, audit pipes
are "lossy", dropping records in low memory conditions or when the
process falls behind real-time events. This mechanism is appropriate
for use by live monitoring systems, host-based intrusion detection, etc,
and avoids applications having to dig through active on-disk trails that
are owned by the audit daemon.
Obtained from: TrustedBSD Project
initialization routines into a ctor, tear-down to a dtor, cleaning
up, etc. This will allow audit records to be allocated from
per-cpu caches.
On recent FreeBSD, dropping the audit_mtx around freeing to UMA is
no longer required (at one point it was possible to acquire Giant
on that path), so a mutex-free thread-local drain is no longer
required.
Obtained from: TrustedBSD Project
This should not happen, but with this assert, brueffer and I would
not have spent 45 minutes trying to figure out why he wasn't
seeing audit records with the audit version in CVS.
Obtained from: TrustedBSD Project
an incompatible conversion from a 64-bit pointer to a 32-bit integer on
64-bit platforms. We will investigate whether Solaris uses a 64-bit
token here, or a new record here, in order to avoid truncating user
pointers that are 64-bit. However, in the mean time, truncation is fine
as these are rarely/never used fields in audit records.
Obtained from: TrustedBSD Project
- td_ar to struct thread, which holds the in-progress audit record during
a system call.
- p_au to struct proc, which holds per-process audit state, such as the
audit identifier, audit terminal, and process audit masks.
In the earlier implementation, td_ar was added to the zero'd section of
struct thread. In order to facilitate merging to RELENG_6, it has been
moved to the end of the data structure, requiring explicit
initalization in the thread constructor.
Much help from: wsalamon
Obtained from: TrustedBSD Project
- Management of audit state on processes.
- Audit system calls to configure process and system audit state.
- Reliable audit record queue implementation, audit_worker kernel
thread to asynchronously store records on disk.
- Audit event argument.
- Internal audit data structure -> BSM audit trail conversion library.
- Audit event pre-selection.
- Audit pseudo-device permitting kernel->user upcalls to notify auditd
of kernel audit events.
Much work by: wsalamon
Obtained from: TrustedBSD Project, Apple Computer, Inc.
security.mac.biba.interfaces_equal
If non-zero, all network interfaces be created with the label:
biba/equal(equal-equal)
This is useful where programs which initialize network interfaces
do not have any labeling support. This includes dhclient and ppp. A
long term solution is to add labeling support into dhclient(8)
and ppp(8), and remove this variable.
It should be noted that this behavior is different then setting the:
security.mac.biba.trust_all_interfaces
sysctl variable, as this will create interfaces with a biba/high label.
Lower integrity processes are not able to write to the interface in this
event. The security.mac.biba.interfaces_equal will override
trust_all_interfaces.
The security.mac.biba.interfaces_equal variable will be set to zero
or disabled by default.
MFC after: 2 weeks
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
framework. This makes Giant protection around MAC operations which inter-
act with VFS conditional, based on the MPSAFE status of the file system.
Affected the following syscalls:
o __mac_get_fd
o __mac_get_file
o __mac_get_link
o __mac_set_fd
o __mac_set_file
o __mac_set_link
-Drop Giant all together in __mac_set_proc because the
mac_cred_mmapped_drop_perms_recurse routine no longer requires it.
-Move conditional Giant aquisitions to after label allocation routines.
-Move the conditional release of Giant to before label de-allocation
routines.
Discussed with: rwatson
