Commit Graph

28 Commits

Author SHA1 Message Date
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
65309e5cda Convert IIJ copyrights to BSD copyrights.
Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>
2001-06-13 21:52:19 +00:00
Brian Somers
0a4b6c5c5c Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.

I made the style more consistent in ip.c - this should really have
been done as a separate commit.
2000-07-11 22:11:36 +00:00
Brian Somers
9825166754 o Log the (payload/size) of all packet types, not just TCP packets
o  If the new ``filter-decapsulation'' is enabled, delve into UDP packets
   that contain 0xff 0x03 as the first two bytes, and if we recognise it
   as PROTO_IP, decapsulate it for the purpose of filter checking.

   If we recognise it as PROTO_<anything else> mention this for logging
   purposes only.

This change is aimed at people running PPPoUDP where the UDP traffic is
being sent over another PPP link.  It's desireable to have the top level
link connected all the time, but to have the bottom level link capable
of decapsulating the traffic and comparing the payload against the filters,
thus allowing ``set filter dial ...'' to work in tunnelled environments.

The caveat here is that the top ppp cannot employ any compression layers
without making the data unreadable for the bottom ppp.  ``disable deflate
pred1 vj'' and ``deny deflate pred1 vj'' is suggested.
2000-07-07 14:22:08 +00:00
Brian Somers
26af0ae966 Cosmetic: Make struct mbuf more like kernel mbufs. 1999-12-20 20:29:47 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
5a72b6eda3 Put the IP buffer queues into struct ipcp.
Forgotten by: me
1998-08-26 17:39:37 +00:00
Brian Somers
6f8e9f0a8a If we've got a full output buffer queue and cannot send
anything for two mintues (see ``set choked'' and ``show
bundle''), nuke the ip, mp and link level buffer queues.

This should fix problems where ``ppp -auto'' seems to stop
responding after failing to connect to the peer a few times.
1998-08-25 17:48:43 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Brian Somers
5ca5389af4 Move filter sets into struct bundle. 1998-03-16 22:52:54 +00:00
Brian Somers
ab886ad0f6 Move the idle timer into struct bundle. There's no
link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
Brian Somers
f4768038f0 o Remove the global CcpInfo. It's now part of the datalink.
Struct bundle will have its own struct ccp in the future
  too.
o The ``set stopped'' command now requires context and doesn't
  work on the IPCP FSM.
o Check if it's time to break out of our top level loop before
  doing a select - otherwise, we'll select forever :-(
o Remove `struct link'::ccp (a temporary hack).  It turns out
  that IpStartOutput() calls link_Output() and link_Output()
  incorrectly calls StartOutput() (really modem_StartOutput)
  requiring the ccp knowledge so that it can call
  IpStartOutput()...  The end result is that the whole IP
  output queue gets dumped into the modem output queue
  and a pile of physical writes are done prematurely.  This
  makes the (original) code in main() actually work in that
  it would not bother selecting() on the tun descriptor when
  our modem queue length was 20 or greater.  Instead, we now
  make that decision based on the overall queue length.

  This will need improvement later.
1998-02-23 00:38:44 +00:00
Brian Somers
7a6f872047 Create `struct bundle' - the top level control structure.
This structure will eventually contain a list of NCPs (currently
only IPCP is supported) and a list of physical `struct link's.
It will also derive from a struct link itself.
Make ModemTimeout() static - it's way to dangerous to be called
from outside !
Bump version to 1.9.  Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
Brian Somers
8c07a7b2e0 Create `struct link' - the logical link from which
`struct physical' (and the future `struct logical')
are derived.
1998-01-30 19:46:07 +00:00
Brian Somers
63b7346316 Create a new MP branch for `multilink protocol'.
Do lots of initial shuffling and grouping.
Submitted by: Eivind Eklund <perhaps@yes.no>
1998-01-29 00:49:32 +00:00
cvs2svn
1ae349f52c This commit was manufactured by cvs2svn to create branch 'MP'. 1998-01-29 00:44:16 +00:00
Brian Somers
b2167e32a4 Show how much time is left before timing out in the
`show timeout' output.
Remove ipIdleSecs variable - it's not used.
1997-12-29 22:23:13 +00:00
Brian Somers
6eaa6ac5d5 Cosmetic:
Move prototypes into the correct headers.
1997-10-26 12:42:13 +00:00
Brian Somers
75240ed178 Cosmetic (no functional changes):
o   Add missing $Id$s
o   Move extern decls from .c -> .h files
o   Staticize
o   Remove #includes from .h files
o   style(9)ify includes
o   bcopy -> memcpy
    bzero -> memset
    bcmp -> memcmp
    index -> strchr
    rindex -> strrchr
o   Move timeout.h -> timer.h (making it consistent w/ timer.c)
o   Add -Wmissing-prototypes
1997-10-26 01:04:02 +00:00
Brian Somers
944f709824 Make the code format more in line with style(9).
Update loadalias to use the new libalias api.
Update to version 1.1.
1997-08-25 00:29:32 +00:00
Brian Somers
927145be97 Overhaul ppp:
o Use syslog
  o Remove references to stdout/stderr (incl perror())
  o Introduce VarTerm - the interactive terminal or zero
  o Allow "set timeout" to affect current session
  o Change "set debug" to "set log"
  o Allow "set log [+|-]flag"
  o Make MSEXT and PASSWDAUTH stuff the default
  o Move all #ifdef DEBUG stuff into the code - this
    shouldn't be too much overhead.  It's now controlled
    with "set log +debug"
  o Add "set log command, debug, tun, warn, error, alert"
  o Remove cdefs.h, and assume an ansi compiler.
  o Improve all diagnostic output
  o Don't trap SIGSEGV
  o SIGHUP now terminates again (log files are controlled
    by syslog)
  o Call CloseModem() when changing devices
  o Fix parsing of third arg of "delete"

I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten.  It'll follow soon.
1997-06-09 03:27:43 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Poul-Henning Kamp
ed6a16c181 Final cleanup for now. -Wall is now silent. A couple of bogons found. 1996-01-11 17:48:59 +00:00