sb_cc member of struct sockbuf to a couple of inline functions:
sbavail() and sbused()
Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
struct ifnet if_oqdrops.
Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
commit message should have been:
In case if ng_ppp(4) runs only IPv4, with one link, w/o any
encryption and compression, set faster rcvhook method.
Submitted by: Dmitry Luhtionov <dmitryluhtionov gmail.com>
graph. In particular, this solves some issues with (probably leaked)
IPSec-related tags being looped back through netgraph to the inbound
path which then misinterpreted the stale tags.
MFC after: 7 days
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
Quite often it can be just packet reorder, and killing link in such case
is inconvenient. Add few sysctl's to control that behavior.
PR: kern/182212
Submitted by: Eugene Grosbein <egrosbein@rdtc.ru>
MFC after: 2 weeks
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
These device IDs have an AR3012 bluetooth device that shows up with
bcdDevice=1 when it doesn't have the firmware loaded, and bcdDevice=2
when it's ready to speak full HCI.
Tested:
* AR5B225 PCIe - AR9485 + AR3012
- Use simple ++ for rare events.
- Use uma_zone_get_cur() to get knowledge about space left in cache.
- Convert many fields of struct ng_netflow_info to 64 bit.
Tested by: Viktor Velichkin <avisom yandex.ru>
Sponsored by: Nginx, Inc.
Actually, text versions of generic commands are not used, since ngctl(8)
uses binary messages for them. And to request a text command one needs
a working ngctl(8). That's why the bug was never discovered. I'm pondering
on removing the text support for generic commands.
Found by: dim with clang 3.4
to the soreceive(). This exposed a bug. When reading from a raw socket,
when our fake limit is depleted, we receive a truncated mbuf chain, with
m->m_pkthdr.len > m_length(m). The first problem is that MSG_TRUNC was not
handled. The second one is that we didn't reinit uio_resid in our endless
loop (neither flags), and if socket buffer contained several records, then
we quickly deplete our fake limit. The third bug, actually introduced in
r248885, is that MJUMPAGESIZE isn't enough to handle maximum packet that
ng_ksocket(4) can theoretically receive.
Changes:
- Reinit uio_resid and flags before every call to soreceive().
- Set maximum acceptable size of packet to IP_MAXPACKET. As for now the
module doesn't support INET6.
- Properly handle MSG_TRUNC return from soreceive().
PR: 184601
Submitted & tested by: Viktor Velichkin <avisom yandex.ru>
Sponsored by: Nginx, Inc.
it had no hooks. It has abused ifnet's if_afdata slot and actually
abused every subsystem it touched.
lagg(4) is a proper trunking solution at ifnet(9) layer.
ng_one2many(4) is a proper trunking solution in netgraph(4).
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
Submitted by: adrian, zec
Fix multiple kernel panics when VIMAGE is enabled in the kernel.
These fixes are based on patches submitted by Adrian Chadd and Marko Zec.
(1) Set curthread->td_vnet to vnet0 in device_probe_and_attach() just before calling
device_attach(). This fixes multiple VIMAGE related kernel panics
when trying to attach Bluetooth or USB Ethernet devices because
curthread->td_vnet is NULL.
(2) Set curthread->td_vnet in if_detach(). This fixes kernel panics when detaching networking
interfaces, especially USB Ethernet devices.
(3) Use VNET_DOMAIN_SET() in ng_btsocket.c
(4) In ng_unref_node() set curthread->td_vnet. This fixes kernel panics
when detaching Netgraph nodes.
Submitted by: "YAMAMOTO, Shigeru" <shigeru@iij.ad.jp>
Reviewed by: adrian
In PC-BSD 9.1, VIMAGE is enabled in the kernel config.
For laptops with Bluetooth capability, such as the HP Elitebook 8460p,
the kernel will panic upon bootup, because curthread->td_vnet
is not initialized.
Properly initialize curthread->td_vnet when initializing the Bluetooth stack.
This allows laptops such as the HP Elitebook 8460p laptop
to properly boot with VIMAGE kernels.
