Commit Graph

86 Commits

Author SHA1 Message Date
John Baldwin
b72ea57f3b Generalize the UFS bad magic value used to determine when a filesystem
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.

Submitted by:	"Xin LI" delphij at frontfree dot net
MFC:		maybe?
2004-08-19 11:09:13 +00:00
Mark Murray
4c723140a4 Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core, imp
2004-04-09 19:58:40 +00:00
Robert Watson
ce20d788fa Add a "-l" flag to newfs, which sets the FS_MULTILABEL flag. This
permits users of newfs to set the multilabel flag on UFS1 and UFS2
file systems from inception without using tunefs.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, McAfee Research
2004-02-26 01:14:27 +00:00
Wes Peters
96982f9bfd Fix whitespace error in previous commit.
Approved by:	RE@ (Robert Watson)
2003-11-27 01:19:23 +00:00
Wes Peters
f44ec7f89e Don't use UFS2_BAD_MAGIC on UFS (v1) filesystems; it is Not Ready
for Prime Time there.

Submitted by:	Xin LI <delphij@frontfree.net>
Approved by:	RE@ (John, Scott)
2003-11-23 08:29:01 +00:00
Wes Peters
0af4e34b2e Add the -E command line option to force error conditions for testing.
Sponsord by:	St. Bernard Software
2003-11-16 07:17:30 +00:00
Wes Peters
ec52df8eb9 Write the UFS2 superblock with a 'BAD' magic number at the beginning
of newfs, to signify the newfs operation has not yet completed.  Re-
write the superblock with the correct magic number once all of the
cylinder groups have been created to show the operation has finished.

Sponsored by:	St. Bernard Software
2003-11-16 07:08:27 +00:00
Kirk McKusick
524ee1107f Create a .snap directory mode 770 group operator in the root of
a new filesystem. Dump and fsck will create snapshots in this
directory rather than in the root for two reasons:

1) For terabyte-sized filesystems, the snapshot may require many
   minutes to build. Although the filesystem will not be suspended
   during most of the snapshot build, the snapshot file itself is
   locked during the entire snapshot build period. Thus, if it is
   accessed during the period that it is being built, the process
   trying to access it will block holding its containing directory
   locked. If the snapshot is in the root, the root will lock and
   the system will come to a halt until the snapshot finishes. By
   putting the snapshot in a subdirectory, it is out of the likely
   path of any process traversing through the root and hence much
   less likely to cause a lock race to the root.

2) The dump program is usually run by a non-root user running with
   operator group privilege. Such a user is typically not permitted
   to create files in the root of a filesystem. By having a directory
   in group operator with group write access available, such a user
   will be able to create a snapshot there. Having the dump program
   create its snapshot in a subdirectory below the root will benefit
   from point (1) as well.

Sponsored by:   DARPA & NAI Labs.
2003-11-04 07:34:32 +00:00
Yaroslav Tykhiy
244fca1ffa Exit with a non-zero status upon a block allocation failure.
The old way of just returning could result in a file system
extremely likely to panic the kernel.  The warning printed
wouldn't help much since tools invoking newfs(8), e.g., mdmfs(8),
couldn't detect the error.

PR:		bin/55078
MFC after:	1 week
2003-08-05 13:35:17 +00:00
Doug Barton
a32bb1b53a When newfs'ing a partition with UFS2 that had previously been newfs'ed
with UFS1, the UFS1 superblocks were not deleted. This allowed any
RELENG_4 (or other non-UFS2-aware) fsck to think it knew how to "fix"
the file system, resulting in severe data scrambling.

This patch is a more advanced version than the one originally submitted.
Lukas improved it based on feedback from Kirk, and testing by me. It
blanks all UFS1 superblocks (if any) during a UFS2 newfs, thereby causing
fsck's that are not UFS2 aware to generate the "SEARCH FOR ALTERNATE
SUPER-BLOCK FAILED" message, and exit without damaging the fs.

PR:		bin/51619
Submitted by:	Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by:	kirk
Approved by:	re (scottl)
2003-05-22 18:38:54 +00:00
Ian Dowse
7bdf1805b1 Put back the error checking in wtfs() that was lost when newfs was
changed to use libufs in revision 1.71. Without this, any write
failures in newfs were silently ignored.

Note that this will display a meaningless errno string in the case
of a short write as opposed to a write error, since bwrite()'s
return value does not allow the caller to determine if errno is
valid.

Reported by:	Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by:	jmallett
Approved by:	re (bmah)
2003-05-10 18:58:17 +00:00
David E. O'Brien
c69284ca08 Use __FBSDID() to quiet GCC 3.3 warnings. 2003-05-03 18:41:59 +00:00
Kirk McKusick
e27c9f46ad Fix the -R flag so that it provides sequential "random" numbers
so that the regression test will succeed.

Sponsored by:   DARPA & NAI Labs.
2003-02-22 23:26:11 +00:00
Kirk McKusick
aca3e4974f Replace use of random() with arc4random() to provide less guessable
values for the initial inode generation numbers in newfs and for
newly allocated inode generation numbers in the kernel.

Submitted by:	Theo de Raadt <deraadt@cvs.openbsd.org>
Sponsored by:   DARPA & NAI Labs.
2003-02-14 21:31:58 +00:00
Kirk McKusick
363c185255 Correct lines incorrectly added to the copyright message. Add missing period.
Submitted by:	Bruce Evans <bde@zeta.org.au>
Sponsored by:   DARPA & NAI Labs.
2003-02-14 21:08:14 +00:00
Juli Mallett
fc903aa525 Convert newfs to libufs (really). Solves one real issue with previous
version of such.  Differences in filesystems generated were found to be
from 1) sbwrite with the "all" parameter 2) removal of writecache.  The
sbwrite call was made to perform as the original version, and otherwise
this was checked against a version of newfs with the write cache removed.
2003-02-11 03:06:45 +00:00
Gordon Tetlow
c715b047bc Bring in support for volume labels to the filesystem utilities.
Reviewed by:	mckusick
2003-02-01 04:17:10 +00:00
Juli Mallett
5a29754e3f Back out conversion to libufs, for now. It seems to cause problems.
Reported by: phk
2003-01-29 22:52:27 +00:00
Juli Mallett
9d492cddac Convert newfs to use libufs. I've tested this on md filesystems, as has
keramida, and all seems well.
2003-01-27 07:24:32 +00:00
Kirk McKusick
33493b1820 Correctly calculate the initial number of fragments in a filesystem
so that fsck does not complain with `SUMMARY BLK COUNT(S) WRONG IN
SUPERBLK' the first time it is run on a new filesystem.

Reported by:	Poul-Henning Kamp <phk@freebsd.org>
Sponsored by:   DARPA & NAI Labs.
2002-12-02 19:31:53 +00:00
Kirk McKusick
41e20344a2 Add some more checks to newfs so that it will not build filesystems
that the kernel will refuse to mount. Specifically it now enforces
the MAXBSIZE blocksize limit. This update also fixes a problem where
newfs could segment fault if the selected fragment size was too large.

PR:		bin/30959
Submitted by:	Ceri Davies <setantae@submonkey.net>
Sponsored by:   DARPA & NAI Labs.
2002-11-30 18:28:26 +00:00
Kirk McKusick
ada981b228 Create a new 32-bit fs_flags word in the superblock. Add code to move
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.

Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.

Suggested by:	BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by:   DARPA & NAI Labs.
2002-11-27 02:18:58 +00:00
Kirk McKusick
59a825617f Properly calculate the initial number of fragments in a large filesystem.
Sponsored by:   DARPA & NAI Labs.
2002-11-15 23:50:14 +00:00
Kirk McKusick
ecfc865a4b Bound the size of the superblock to SBLOCKSIZE.
Submitted by:	BOUWSMA Beery <freebsd-misuser@netscum.dyndns.dk>
Sponsored by:	DARPA & NAI Labs.
2002-10-18 23:17:30 +00:00
Mike Barcroft
89fdc4e117 Use the standardized CHAR_BIT constant instead of NBBY in userland. 2002-09-25 04:06:37 +00:00
Tom Rhodes
ce66ddb763 s/filesystem/file system/g as discussed on -developers 2002-08-21 18:11:48 +00:00
Ollivier Robert
752c7d0862 di_createtime -> di_birthtime.
Submitted by:	Udo Schweigert <Udo.Schweigert@siemens.com>
2002-07-17 10:31:38 +00:00
Bruce Evans
ffcaf36b2c Fixed 4 printf format errors that were fatal on alphas. %qd is not even
suitable for printing quad_t's since it is equivalent to %lld but quad_t
is unsigned long on alphas.  quad_t shouldn't be used anyway.
2002-07-11 17:49:41 +00:00
Kirk McKusick
5e5d87ff36 Get rid of paranoia that zeros the boot block area as this has
bad effect on existing bootstraps.

Submitted by:	Jake Burkholder <jake@locore.ca>
Sponsored by:	DARPA & NAI Labs.
2002-06-22 22:44:09 +00:00
Kirk McKusick
1c85e6a35d This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.

Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.

Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).

Sponsored by: DARPA & NAI Labs.
Reviewed by:	Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
Tom Rhodes
3468b317cb more file system > filesystem 2002-05-16 04:10:46 +00:00
Poul-Henning Kamp
9aba332745 Continue the cleanup preparations for UFS2 (& GEOM):
Use only one filedescriptor.  Open in R/O or R/W based in the '-N' option.
Make the filedescriptor a global variable instead of passing it around
as semi-global variable(s).

Remove the undocumented ability to specify type without '-T' option.

Replace fatal() with straight err(3)/errx(3).  Save calls to strerror()
where applicable.  Loose the progname variable.

Get the sense of the cpgflag test correct so we only issue warnings if
people specify cpg and can't get that.  It can be argued that this
should be an error.

Remove the check to see if the disk is mounted:  Open for writing
would fail if it were mounted.

Attempt to get the sectorsize and mediasize with the generic disk
ioctls, fall back to disklabel and /etc/disktab as we can.

Notice that on-disk labels still take precedence over /etc/disktab,
this is probably wrong, but not as wrong as the entire concept of
/etc/disktab is.

Sponsored by:   DARPA & NAI Labs.
2002-04-24 11:44:02 +00:00
Poul-Henning Kamp
ebdb43a2f8 bbsize and sbsize cannot ever be trusted from the disklabel, in
particular as there may not be one.  Remove #if 0'ed code which might
mislead people to think otherwise.

unifdef -ULOSTDIR, fsck can make lost+found on the fly.

Sponsored by:	DARPA & NAI Labs
2002-04-07 14:57:57 +00:00
Bruce Evans
a2f4e30c8c Fixed some English errors in previous commit.
Fixed some style bugs in the removal of __P(()).  Whitespace before
"__P((" was not removed.
2002-04-04 09:45:11 +00:00
Poul-Henning Kamp
1f35193bdc Add more DWIM/autoadjustment and less evil style(9) banned exit(2) codes.
Add some missing statics.

Sponsored by: DARPA & NAI Labs.
2002-04-03 20:48:05 +00:00
Poul-Henning Kamp
5dccd5c649 Swing the axe and remove some archaic features from newfs which modern
diskdrives do neither need nor want:

	-O create a 4.3BSD format filesystem
	-d rotational delay between contiguous blocks
	-k sector 0 skew, per track
	-l hardware sector interleave
	-n number of distinguished rotational positions
	-p spare sectors per track
	-r revolutions/minute
	-t tracks/cylinder
	-x spare sectors per cylinder

No change in the produced filesystem image unless one or more of
these options were used.

Approved by:	mckusick
2002-03-20 07:16:15 +00:00
Poul-Henning Kamp
89fb8ee796 Add the undocumented -R option to disable randomness for regression-testing.
Add a couple of simple regression tests accessible with "make test", they
depend on the md(4) driver.

FYI I have also tried running the test against a week old newfs and it
passed.
2002-03-19 21:05:29 +00:00
Poul-Henning Kamp
8409849dd0 Further cleanups. 2002-03-19 20:01:38 +00:00
Ian Dowse
475df34ac2 Replace a number of similar for' loops with a new ilog2()' function
that computes the base-2 log of a power of 2.
2002-03-19 17:39:01 +00:00
Ian Dowse
bf57cced53 Complete the ANSIfication of newfs by converting function declarations
to C89 style.
2002-03-19 17:20:02 +00:00
Ian Dowse
f7b48c89c8 The FSIRAND code is always compiled in, and it is unlikely that
anyone needs a newfs without it. Remove the #ifdef's from around
the code and the -DFSIRAND from the Makefile. Also remove redundant
declarations of random() and srandomdev().
2002-03-19 17:03:14 +00:00
Ian Dowse
9710700cb1 Remove the ancient STANDALONE code.
Approved by:	phk
2002-03-19 16:47:20 +00:00
Ian Dowse
af53d6d86e Remove yet more vestiges of mount_mfs. 2002-03-18 15:31:44 +00:00
Bruce Evans
63dab85cea Fixed some style bugs (mainly ones not fixed or made worse by rev.1.41).
Old code obfuscates long (but single-line) messages by printing them in
pieces using %s.  Rev.1.41 obfuscated some new long messages using ISO
string concatenation.  This commit only fixes the new obfuscations.
2002-03-18 02:43:14 +00:00
Poul-Henning Kamp
345b78a301 Remove __P() and register.
Set WARNS=2

This is the beginning of a pre-UFS2 cleanup of newfs.

Sponsored by:	DARPA, NAI Labs
2002-03-17 09:01:41 +00:00
Poul-Henning Kamp
bfd1f63d44 style(9) cleanup.
Submitted by:	j mckitrick <jcm@freebsd-uk.eu.org>
Reviewed by:	phk, /sbin/md5
2001-11-02 09:23:34 +00:00
Brian Somers
9cfe90fe1f Handle snprintf() returning < 0 (not just -1)
MFC after:	2 weeks
2001-08-20 14:53:05 +00:00
Brian Somers
327e849ae1 Handle snprintf() returning -1.
MFC after:	2 weeks
2001-08-20 12:56:45 +00:00
Poul-Henning Kamp
80f86e526b A more complete removal of MFS related code.
XXX: This program badly needs a style(9) + BDECFLAGS treatment.
2001-05-29 19:40:39 +00:00
Kris Kennaway
1fef4cc97d sprintf() -> snprintf()
Partially submitted by:	"Andrew R. Reiter" <arr@watson.org>
Obtained from:	OpenBSD
2001-04-24 10:26:00 +00:00