The version check for sku and family values is not correct, as this data is
valid for version 2.4+, that also includes version 3.0 and above.
Reported by: Dan McDonald
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8578
lsdev command does walk over devsw list, prints list element name and
will use dv_print() callback to print the device list.
Unfortunately this approach will add unneeded noise when there are no
particular devices detected.
To remove "empty" device section headers, the dv_print() callback
should print the header instead.
In addition, fixed dv_print callback for md module.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8551
Always define boot.netif.server in kenv in pxeboot
Add "boot.tftproot.server" to kenv when pxeboot uses tftpfs
Change the code order when setting env for TFTP or NFS to be the same as
common/dev_net.c
Reported by: tsoome
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
FICL definitions not in ficl/ficl32 files broke this generally. This
makes that stuff conditional on BOOT_FORTH. Also, move definitions
related to the architecture (FICL_CPUARCH and friends) into
Makefile.ficl that all parts of the tree that include files with ficl
need to include (but only if MK_FORTH == yes). In addition, had to fix
library ordering issue with LIBSTAND to keep it last. Without boot
forth, there's no references to memset to bring in memset.o from
libstand.a to satisfy libgeliboot.a's use of it. Listing libstand last
solves this issue (and it's the proper place for libstand to boot).
functions to call at the appropriate time to register new forth
words. In the past we've done this with ifdef soup, but now if the
file is included in the build, we'll get the new forth words.
Use this new functionality to move the pci bios stuff out of loader.c
by moving it to biospci.c.
Move the pnp functionality to common/pnp.c.
Move the inb/outb forth words to the i386 sysdep.c file where their
implementation is defined.
Adjust the efi linker scripts and build machinery to cope.
his should be an invisible change to forth scripts and user
experience.
Differential Revision: https://reviews.freebsd.org/D8145
files and, in a number of these places, there were problems with how they
were declared.
Some used int return instead of time_t. On some architectures the bit
width of time_t did not naturally fit into an integer and could lead to
some unexpected behavior. (For example, 32-bit ARM builds uses a 64-bit
time_t.)
Make sure the function prototypes always specify void for the argument
list when they do not have any arguemnts, otherwise some compilers can
complain about the prototype.
Reported by: Kevin Zheng
Reviewed by: sjg
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7463
In some Dell systems and usb stick combinations, it is found that
int13 AH=08 is reporting back bad sector information, preventing the
boot.
This update is allowing bd_int13probe() to use extended info call to
build disk properties.
It also can happen the total sectors count from extended info may be
wrong, in such case, the CHS data is used to calculate total sectors.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7718
Add a new 'netproto' variable which can be set for now to
NET_TFTP or NET_NFS (default to NET_NONE)
From the dhcp options if one sets the root-path option to:
"ip:path", the loader will consider it is booting over NFS
(meaning same behaviour as the default current behaviour)
if the dhcp option "tftp server address" is set (option 150)
the loader will consider it is booting over tftpfs, it will then
consider the root-path options with 2 possible case
1. "path" then the IP of the tftp server will be the one passed by
the option 150, and the files will be retrieved under "path" on the tftp
server
2. "ip:path" then the IP of the tftp server will be the one passed in
the option "overwritting the IP from the option 150.
We could not "abuse" the rootpath option in the form or tftp://ip:path because
this is already used for other purpose by iPXE preventing any chainload from
iPXE to the FreeBSD loader.
Given at each open(), the loader loops over all available filesystems and keep
the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa.
the tftpfs and nfs implementation in libstand now return EINVAL early if
'netproto' for that purpose.
Reviewed by: tsoome
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D7628
beyond the end of disk. r298900 added code to prevent this. Some BIOSes
cause significant delays if asked to read past end-of-disk.
We never trusted the BIOS to accurately report the sectorsize of disks
before and this set of changes. Unfortuately they interact badly with
the infamous >2TB wraparound bugs. We have a number of relatively-recent
machines in the FreeBSD.org cluster where the BIOS reports 3TB disks as 1TB.
With pre-r298900 they work just fine. After r298900 they stop working if
the boot environment attempts to access anything outside the first 1TB on
the disk. 'ZFS: I/O error, all block copies unavailable' etc. It affects
both UFS and ZFS if they try to boot from large volumes.
This change replaces the blind trust of the BIOS end-of-disk reporting
with a read-ahead clip to prevent reads crossing the of end-of-disk
boundary. Since 2^32 (2TB) size reporting truncation is not uncommon,
the clipping is done on 2TB aliases of the reported end-of-disk.
ie: a 3TB disk reported as 1TB has readahead clipped at 1TB, 3TB, 5TB, ...
as one of them is likely to be the real end-of-disk.
This should make the loader on these broken machines behave the same as
traditional pre-r298900 loader behavior, without disabling read-ahead.
PR: 212139
Discussed with: tsoome, allanjude
SMBIOS Type 1 fields:
smbios.system.sku - SKU Number (SMBIOS 2.4 and above)
smbios.system.family - Family (SMBIOS 2.4 and above)
Add kernel environment variables under smbios.planar for the following
SMBIOS Type 2 fields:
smbios.planar.tag - Asset Tag
smbios.planar.location - Location in Chassis
Reviewed by: jhb, grembo
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7453
Replace all rounding with the round{up,down}2 macros
a missing set of braces caused the previous code to be incorrect
replace alloca() with malloc() because alloca() can return an allocation
that is actually invalid, causing boot to fail
Reviewed by: emaste, ed
Thanks To: peter
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6213
return value when it could return 1 (indicating we should stop).
Fix a few instances of pager_open() / pager_close() not being called.
Actually use these routines for the environment variable printing code
I just committed.
The new bcache code does not know the size of the disk, and therefore may attempt to read past the end of the disk while trying to fill its read-ahead cache.
This is usually not an issue, it fails gracefully on all of my machines, but some BIOSes seem to retry the reads for up to 30 seconds each, resulting in a long stall during boot
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: jhb, np
Differential Revision: https://reviews.freebsd.org/D6109
The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.
Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713
system. This uses the hints mechnanism. This mostly works today
because when there's no static hints (the default), this value can be
fetched from the hint. When there is a static hints file, the hint
passed from the boot loader to the kernel is ignored, but for the BIOS
case we're able to find it anyway. However, with UEFI, the fallback
doesn't work, so we get a panic instead.
Switch to acpi.rsdp and use TUNABLE_ULONG_FETCH instead. Continue to
generate the old values to allow for transitions. In addition, fall
back to the old method if the new method isn't present.
Add comments about all this.
Differential Revision: https://reviews.freebsd.org/D5866
Add support for 4k sector GELI encrypted partitions to the bootloader
This is the default created by the installer
Because the IV is different for each sector, and the XTS tweak carries forward you can not decrypt a partial sector if the starting offset is not 0
Make boot2 and the loader read in 4k aligned chunks
Reviewed by: ed, oshogbo
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5820
to the boot.netif.mtu env var, which will be picked up by pre-existing code
in nfs_mountroot() and used to configure the interface accordingly.
This should bring the same functionality when the bootp/dhcp work is done
by loader(8) as r297150 does for the in-kernel BOOTP case.
Set WARNS if not set for EFI boot code and fix the issues highlighted by
setting it.
Most components are set to WARNS level 6 with few being left at lower
levels due to the amount of changes needed to fix at higher levels.
Error types fixed:
* Missing / invalid casts
* Missing inner structs
* Unused vars
* Missing static for internal only funcs
* Missing prototypes
* Alignment changes
* Use of uninitialised vars
* Unknown pragma (intrinsic)
* Missing types etc due to missing includes
* printf formatting types
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4839
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Return EINVAL instead of EFTYPE if we have a multiboot kernel loaded but
failed to load the modules. This makes it clear that the kernel/module
should be handled by the multiboot handler but something went wrong.
Sponsored by: Citrix Systems R&D
Zero the list of modules array before using it, or else we might pass
uninitialized data in unused fields of the struct that will make Xen choke.
Also add a check to make sure malloc succeeds.
Sponsored by: Citrix Systems R&D
- Add a quirk to allow ignoring e820 extended memory detection.
- Improve memory detection through e801.
- Add bootloader command "biosmem".
See differential revision for more details.
Reviewed by: jhb, adrian
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D1741
Motivation is to introduce BIOS specific quirks early in the boot
process. smbios_match can be called before malloc is avaible, that's
why parts of smbios_detect have been moved into a separate function
smbios_probe that will be called by smbios_detect as well as
smbios_match.
Reviewed by: jhb
Approved by: jhb
Differential Revision: https://reviews.freebsd.org/D1679
__attribute__((format(...))), and the -fformat-extensions flag was
removed, introduce a new macro in bsd.sys.mk to choose the right variant
of compile flag for the used compiler, and use it.
Also add something similar to kern.mk, since including bsd.sys.mk from
that file will anger Warner. :-)
Note that bsd.sys.mk does not support the MK_FORMAT_EXTENSIONS knob used
in kern.mk, since that knob is only available in kern.opts.mk, not in
src.opts.mk. We might want to add it later, to more easily support
external compilers for building world (in particular, sys/boot).
The data in MODINFOMD_MODULEP is packed by the loader as a 4 byte type, but
the amd64 kernel expects a vm_paddr_t, which is of size 8 bytes. Fix this by
saving it as 8 bytes in the loader and retrieving it using the proper type
in the kernel.
Sponsored by: Citrix Systems R&D
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
bootloader. Implement the following routines:
pcibios-device-count count the number of instances of a devid
pcibios-read-config read pci config space
pcibios-write-config write pci config space
pcibios-find-devclass find the nth device with a given devclass
pcibios-find-device find the nth device with a given devid
pcibios-locator convert bus device function ti pcibios locator
These commands are thin wrappers over their PCI BIOS 2.1 counterparts. More
informaiton, such as it is, can be found in the standard.
Export a nunmber of pcibios.X variables into the environment to report
what the PCI IDENTIFY command returned.
Also implmenet a new command line primitive (pci-device-count), but don't
include it by default just yet, since it depends on the recently added
words and any errors here can render a system unbootable.
This is intended to allow the boot loader to do special things based
on the hardware it finds. This could be have special settings that are
optimized for the specific cards, or even loading special drivers. It
goes without saying that writing to pci config space should not be
done without a just cause and a sound mind.
Sponsored by: Netflix
place for the NFS-based PXE loader. Information like rootpath
or rootip aren't that useful for TFTP and the gateway IP is
typically already printed by the firmware.
2. Only set boot.nfsroot.* environment variables for NFS. This
makes it possible for the OS to work either way by checking
for the presence or absence of environment variables.
3. Set boot.netif.server when using TFTP so that the OS can fetch
files as well. A typical use case for this is network-based
installations with the installation process implemented on
top of FreeBSD.
4. The pxelinux loader has a set of alternative names it tries
for configuration files. Make it easier to do something
similar in Forth by providing the IP address as a 32-bit hex
number in the pxeboot.ip variable and the MAC address with
dashes in the pxeboot.hwaddr environment variable.
Obtained from: Juniper Networks, Inc.
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.
The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf
When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.
Obtained from: Juniper Networks, Inc.
Setting PSE together with PAE or in long mode just makes the PSE bit
completely ignored, so don't set it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
