Commit Graph

15 Commits

Author SHA1 Message Date
Baptiste Daroussin
6c89995002 use .Mt to mark up email addresses consistently (final part)
PR:		191174
Submitted by:	Franco Fichtner <franco at lastsummer.de>
2014-06-26 21:46:14 +00:00
Eitan Adler
50d675f7a9 Remove trailing whitespace per mdoc lint warning
Disussed with:	gavin
No objection from:	doc
Approved by:	joel
MFC after:	3 days
2012-03-29 05:02:12 +00:00
Joel Dahl
3030137a23 Remove superfluous paragraph macro. 2012-03-24 13:37:57 +00:00
Joel Dahl
8bf7539fe9 The NetBSD Foundation has granted permission to remove clause 3 and 4 from
their software.

Obtained from:	NetBSD
2010-03-02 21:59:03 +00:00
Marius Strobl
07d40ca8b3 Correct my e-mail address. 2009-12-25 22:04:00 +00:00
Marius Strobl
d54384d976 - Update regarding the support for SBus GEM added in r194763.
- Improve the description a bit and add a reference to vlan(4).
2009-06-23 20:38:35 +00:00
Marius Strobl
4888dadb59 Don't cross-reference gem(4) and hme(4); maybe this made some sense
back when these two were the only two NIC drivers working on sparc64
but it no longer does nowadays.

MFC after:	3 days
2009-01-15 22:06:53 +00:00
Marius Strobl
1ed3fed743 o Revert the part of if_gem.c rev. 1.35 which added a call to gem_stop()
to gem_attach() as the former access softc members not yet initialized
  at that time and gem_reset() actually is enough to stop the chip. [1]
o Revise the use of gem_bitwait(); add bus_barrier() calls before calling
  gem_bitwait() to ensure the respective bit has been written before we
  starting polling on it and poll for the right bits to change, f.e. even
  though we only reset RX we have to actually wait for both GEM_RESET_RX
  and GEM_RESET_TX to clear. Add some additional gem_bitwait() calls in
  places we've been missing them according to the GEM documentation.
  Along with this some excessive DELAYs, which probably only were added
  because of bugs in gem_bitwait() and its use in the first place, as
  well as as have of an gem_bitwait() reimplementation in gem_reset_tx()
  were removed.
o Add gem_reset_rxdma() and use it to deal with GEM_MAC_RX_OVERFLOW errors
  more gracefully as unlike gem_init_locked() it resets the RX DMA engine
  only, causing no link loss and the FIFOs not to be cleared. Also use it
  deal with GEM_INTR_RX_TAG_ERR errors, with previously were unhandled.
  This was based on information obtained from the Linux GEM and OpenSolaris
  ERI drivers.
o Turn on workarounds for silicon bugs in the Apple GMAC variants.
  This was based on information obtained from the Darwin GMAC and Linux GEM
  drivers.
o Turn on "infinite" (i.e. maximum 31 * 64 bytes in length) DMA bursts.
  This greatly improves especially RX performance.
o Optimize the RX path, this consists of:
  - kicking the receiver as soon as we've a spare descriptor in gem_rint()
    again instead of just once after all the ready ones have been handled;
  - kicking the receiver the right way, i.e. as outlined in the GEM
    documentation in batches of 4 and by pointing it to the descriptor
    after the last valid one;
  - calling gem_rint() before gem_tint() in gem_intr() as gem_tint() may
    take quite a while;
  - doubling the size of the RX ring to 256 descriptors.
  Overall the RX performance of a GEM in a 1GHz Sun Fire V210 was improved
  from ~100Mbit/s to ~850Mbit/s.
o In gem_add_rxbuf() don't assign the newly allocated mbuf to rxs_mbuf
  before calling bus_dmamap_load_mbuf_sg(), if bus_dmamap_load_mbuf_sg()
  fails we'll free the newly allocated mbuf, unable to recycle the
  previous one but a NULL pointer dereference instead.
o In gem_init_locked() honor the return value of gem_meminit().
o Simplify gem_ringsize() and dont' return garbage in the default case.
  Based on OpenBSD.
o Don't turn on MAC control, MIF and PCS interrupts unless GEM_DEBUG is
  defined as we don't need/use these interrupts for operation.
o In gem_start_locked() sync the DMA maps of the descriptor rings before
  every kick of the transmitter and not just once after enqueuing all
  packets as the NIC might instantly start transmitting after we kicked
  it the first time.
o Keep state of the link state and use it to enable or disable the MAC
  in gem_mii_statchg() accordingly as well as to return early from
  gem_start_locked() in case the link is down. [3]
o Initialize the maximum frame size to a sane value.
o In gem_mii_statchg() enable carrier extension if appropriate.
o Increment if_ierrors in case of an GEM_MAC_RX_OVERFLOW error and in
  gem_eint(). [3]
o Handle IFF_ALLMULTI correctly; don't set it if we've turned promiscuous
  group mode on and don't clear the flag if we've disabled promiscuous
  group mode (these were mostly NOPs though). [2]
o Let gem_eint() also report GEM_INTR_PERR errors.
o Move setting sc_variant from gem_pci_probe() to gem_pci_attach() as
  device probe methods are not supposed to touch the softc.
o Collapse sc_inited and sc_pci into bits for sc_flags.
o Add CTASSERTs ensuring that GEM_NRXDESC and GEM_NTXDESC are set to
  legal values.
o Correctly set up for 802.3x flow control, though #ifdef out the code
  that actually enables it as this needs more testing and mainly a proper
  framework to support it.
o Correct and add some conversions from hard-coded functions names to
  __func__ which were borked or forgotten in if_gem.c rev. 1.42.
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o In gem_pci_attach() in case attaching fails release the resources in
  the opposite order they were allocated.
o Make gem_reset() static to if_gem.c as it's not needed outside that
  module.
o Remove the GEM_GIGABIT flag and the associated code; GEM_GIGABIT was
  never set and the associated code was in the wrong place.
o Remove sc_mif_config; it was only used to cache the contents of the
  respective register within gem_attach().
o Remove the #ifdef'ed out NetBSD/OpenBSD code for establishing a suspend
  hook as it will never be used on FreeBSD.
o Also probe Apple Intrepid 2 GMAC and Apple Shasta GMAC, add support for
  Apple K2 GMAC. Based on OpenBSD.
o Add support for Sun GBE/P cards, or in other words actually add support
  for cards based on GEM to gem(4). This mainly consists of adding support
  for the TBI of these chips. Along with this the PHY selection code was
  rewritten to hardcode the PHY number for certain configurations as for
  example the PHY of the on-board ERI of Blade 1000 shows up twice causing
  no link as the second incarnation is isolated.
  These changes were ported from OpenBSD with some additional improvements
  and modulo some bugs.
o Add code to if_gem_pci.c allowing to read the MAC-address from the VPD on
  systems without Open Firmware.
  This is an improved version of my variant of the respective code in
  if_hme_pci.c
o Now that gem(4) is MI enable it for all archs.

Pointed out by:	yongari [1]
Suggested by:	rwatson [2], yongari [3]
Tested on:	i386 (GEM), powerpc (GMACs by marcel and yongari),
		sparc64 (ERI and GEM)
Reviewed by:	yongari
Approved by:	re (kensmith)
2007-09-26 21:14:18 +00:00
Christian Brueffer
22e1a9d50e Xref altq(4). 2007-06-04 16:59:11 +00:00
Marius Strobl
13311d237e Add the usual info about loading as module on startup to the SYNOPSIS. 2006-09-02 12:12:16 +00:00
Marius Strobl
092f607db8 - s/gigabit/Gigabit/
- Talk about supported chips rather than supported cards as the majority
  of the hardware supported by gem(4) is on-board.
- "the .Nm driver"
- Sort the list of supported chips alphabetically.
- Sun GEM aren't used on-board though, so don't claim they'd be.
- Add a CAVEATS section informing that Sun GEM cards aren't supported
  so far.

MFC after:	1 day
2006-09-01 21:42:22 +00:00
Simon L. B. Nielsen
70a310e2dd - Add a HARDWARE section which lists supported devices. 2004-08-15 18:13:08 +00:00
Marius Strobl
83e76ab9e3 - Capitalize Ethernet and Fast Ethernet.
- Add a NOTES section with information regarding the "local-mac-address?"
  system configuration variable on sparc64 and add a reference to eeprom(8)
  for using it. Dump document date for this.
- In dc.4, add the on-board DM9102A on Sun Netra X1 and Sun Fire V100 to
  the list of known working devices.
2004-08-14 21:44:35 +00:00
Ruslan Ermilov
01ddd31ffc Assorted markup, spelling, and grammar fixes. 2004-06-17 19:51:17 +00:00
Thomas Moestl
cc264d0083 - Add manpages for the gem and hme ethernet drivers. These were obtained
from NetBSD, and changed slightly to account for FreeBSD specifics.
- Hook them up to the build.
- Add them to the list of miibus-using drivers in miibus(4).
2003-06-10 18:53:15 +00:00