Commit Graph

133 Commits

Author SHA1 Message Date
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Marcelo Araujo
e0a6a23c6d Allow sysctl kern.vm_guest to return bhyve when running under bhyve.
Submitted by:	Sean Fagan <sef@ixsystems.com>
Reviewed by:	grehan
MFH:		4 weeks.
Sponsored by:	iXsystems, Inc.
Differential Revision:	https://reviews.freebsd.org/D11090
2017-06-08 04:02:14 +00:00
John Baldwin
5d8cce1764 Initialize 'ticks' earlier in boot after 'hz' is set.
This avoids the time-warp after kthreads have started running and the
required fixup to td_slptick and td_blktick in the EARLY_AP_STARTUP
case.  Now, 'ticks' is initialized before any kthreads are created or
any context switches are performed.

Tested by:	gavin
MFC after:	2 weeks
Sponsored by:	Netflix
2016-11-22 01:02:59 +00:00
Ed Maste
69a2875821 Renumber license clauses in sys/kern to avoid skipping #3 2016-09-15 13:16:20 +00:00
Eric Badger
fdb6320d45 Add explicit detection of KVM hypervisor
Set vm_guest to a new enum value (VM_GUEST_KVM) when kvm is detected and use
vm_guest in conditionals testing for KVM.

Also, fix a conditional checking if we're running in a VM which caught only
the generic VM case, but not more specific VMs (KVM, VMWare, etc.).  (Spotted
by: vangyzen).

Differential revision:	https://reviews.freebsd.org/D7172
Sponsored by:	Dell Inc.
Approved by:	kib (mentor), vangyzen (mentor)
Reviewed by:	alc
MFC after:	4 weeks
2016-07-13 19:19:18 +00:00
Konstantin Belousov
1f57d8c66b Ensure that maxproc does not exceed pid_max, at the time of boot.
Changes to kern.pid_max mib after the boot can break this relation.

The maxfiles value was calculated by the MAXFILES formula based on
maxproc value, but this change decouples them, and MAXFILES now
references maxusers.  Without manual tuning, the maxfiles default
value remains as it was prior to this commit.  But for systems which
have tuned maxproc and rely on maxfiles to adjust, additional
reconfiguration is needed.

Reported by:	rwatson
Reviewed by:	emaste
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2015-09-21 15:02:59 +00:00
Adrian Chadd
32766cd281 Also make kern.maxfilesperproc a boot time tunable.
Auto-tuning threshold discussions aside, it turns out that if you want
to lower this on say, rather memory-packed machines, you either set maxusers
or kern.maxfiles, or you set it in sysctl.  The former is a non-exact
way to tune this; the latter doesn't actually affect anything in the
startup scripts.

This first occured because I wondered why the hell screen would take upwards
of 10 seconds to spawn a new screen.  I then found python doing the same
thing during fork/exec of child processes - it calls close() on each FD
up to the current openfiles limit.  On a 1TB machine this is like, 26 million
FDs per process.  Ugh.

So:

* This allows it to be set early in /boot/loader.conf;
* It can be used to work around the ridiculous situation of
  screen, python, etc doing a close() on potentially millions of FDs
  even though you only have four open.

Tested:

* 4GB, 32GB, 64GB, 128GB, 384GB, 1TB systems with autotune, ensuring
  screen and python forking doesn't result in some pretty hilariously
  bad behaviour.

TODO:

* Note that the default login.conf sets openfiles-cur to unlimited,
  effectively obeying kern.maxfilesperproc.  Perhaps we should fix
  this.

* .. and even if we do, we need to also ensure that daemons get
  a soft limit of something reasonable and capped - they can request
  more FDs themselves.

MFC after:	1 week
Sponsored by:	Norse Corp, Inc.
2015-09-10 04:05:58 +00:00
Konstantin Belousov
edc8222303 Make kstack_pages a tunable on arm, x86, and powepc. On i386, the
initial thread stack is not adjusted by the tunable, the stack is
allocated too early to get access to the kernel environment. See
TD0_KSTACK_PAGES for the thread0 stack sizing on i386.

The tunable was tested on x86 only.  From the visual inspection, it
seems that it might work on arm and powerpc.  The arm
USPACE_SVC_STACK_TOP and powerpc USPACE macros seems to be already
incorrect for the threads with non-default kstack size.  I only
changed the macros to use variable instead of constant, since I cannot
test.

On arm64, mips and sparc64, some static data structures are sized by
KSTACK_PAGES, so the tunable is disabled.

Sponsored by:	The FreeBSD Foundation
MFC after:	2 week
2015-08-10 17:18:21 +00:00
Jeff Roberson
98082691bb - Make 'struct buf *buf' private to vfs_bio.c. Having a global variable
'buf' is inconvenient and has lead me to some irritating to discover
   bugs over the years.  It also makes it more challenging to refactor
   the buf allocation system.
 - Move swbuf and declare it as an extern in vfs_bio.c.  This is still
   not perfect but better than it was before.
 - Eliminate the unused ffs function that relied on knowledge of the buf
   array.
 - Move the shutdown code that iterates over the buf array into vfs_bio.c.

Reviewed by:	kib
Sponsored by:	EMC / Isilon Storage Division
2015-07-29 02:26:57 +00:00
John Baldwin
ed95805e90 Remove support for Xen PV domU kernels. Support for HVM domU kernels
remains.  Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead.  Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
  components for PV kernels.  These components are now standard as they
  are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
  etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.

Differential Revision:	https://reviews.freebsd.org/D2362
Reviewed by:	royger
Tested by:	royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes:	yes
2015-04-30 15:48:48 +00:00
Ian Lepore
acfc962f82 Use SYSCTL_OUT_STR() to return strings.
PR:		195668
2015-03-14 21:40:01 +00:00
John Baldwin
01e1933dcc Rework virtual machine hypervisor detection.
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
  the 0x40000000 leaf to determine the hypervisor vendor ID.  Export the
  vendor ID and the highest supported hypervisor CPUID leaf via
  hv_vendor[] and hv_high variables, respectively.  The hv_vendor[]
  array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
  identcpu.c.  Add a VM_GUEST_VMWARE to identify vmware and use that in
  the TSC code to identify VMWare.

Differential Revision:	https://reviews.freebsd.org/D1010
Reviewed by:	delphij, jkim, neel
2014-10-28 19:17:44 +00:00
Davide Italiano
2be111bf7d Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.

Submitted by:   kmacy
Tested by:      make universe
2014-10-16 18:04:43 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Sergey Kandaurov
903093ecec Add VM_LAST, a special last element in enum VM_GUEST and use it in CTASSERT
to ensure that vm_guest range is covered by vm_guest_sysctl_names.

Suggested by:	mjg
2013-11-12 20:13:10 +00:00
Sergey Kandaurov
40b4cb0f54 Set description string for VM_GUEST_HV (HyperV guest).
This fixes fallout from r256425.

Reported by:	Pavel Timofeev <timp87@gmail com>
Tested by:	Pavel Timofeev <timp87@gmail com>
Reviewed by:	Roger Pau Monnц╘
MFC after:	3 days
2013-11-11 16:14:33 +00:00
Konstantin Belousov
46038d7fa1 Fix typo.
MFC after:	3 days
2013-10-27 18:52:09 +00:00
Konstantin Belousov
ee75e7de7b Implement the concept of the unmapped VMIO buffers, i.e. buffers which
do not map the b_pages pages into buffer_map KVA.  The use of the
unmapped buffers eliminate the need to perform TLB shootdown for
mapping on the buffer creation and reuse, greatly reducing the amount
of IPIs for shootdown on big-SMP machines and eliminating up to 25-30%
of the system time on i/o intensive workloads.

The unmapped buffer should be explicitely requested by the GB_UNMAPPED
flag by the consumer.  For unmapped buffer, no KVA reservation is
performed at all. The consumer might request unmapped buffer which
does have a KVA reserve, to manually map it without recursing into
buffer cache and blocking, with the GB_KVAALLOC flag.

When the mapped buffer is requested and unmapped buffer already
exists, the cache performs an upgrade, possibly reusing the KVA
reservation.

Unmapped buffer is translated into unmapped bio in g_vfs_strategy().
Unmapped bio carry a pointer to the vm_page_t array, offset and length
instead of the data pointer.  The provider which processes the bio
should explicitely specify a readiness to accept unmapped bio,
otherwise g_down geom thread performs the transient upgrade of the bio
request by mapping the pages into the new bio_transient_map KVA
submap.

The bio_transient_map submap claims up to 10% of the buffer map, and
the total buffer_map + bio_transient_map KVA usage stays the
same. Still, it could be manually tuned by kern.bio_transient_maxcnt
tunable, in the units of the transient mappings.  Eventually, the
bio_transient_map could be removed after all geom classes and drivers
can accept unmapped i/o requests.

Unmapped support can be turned off by the vfs.unmapped_buf_allowed
tunable, disabling which makes the buffer (or cluster) creation
requests to ignore GB_UNMAPPED and GB_KVAALLOC flags.  Unmapped
buffers are only enabled by default on the architectures where
pmap_copy_page() was implemented and tested.

In the rework, filesystem metadata is not the subject to maxbufspace
limit anymore. Since the metadata buffers are always mapped, the
buffers still have to fit into the buffer map, which provides a
reasonable (but practically unreachable) upper bound on it. The
non-metadata buffer allocations, both mapped and unmapped, is
accounted against maxbufspace, as before. Effectively, this means that
the maxbufspace is forced on mapped and unmapped buffers separately.
The pre-patch bufspace limiting code did not worked, because
buffer_map fragmentation does not allow the limit to be reached.

By Jeff Roberson request, the getnewbuf() function was split into
smaller single-purpose functions.

Sponsored by:	The FreeBSD Foundation
Discussed with:	jeff (previous version)
Tested by:	pho, scottl (previous version), jhb, bf
MFC after:	2 weeks
2013-03-19 14:13:12 +00:00
Andre Oppermann
f8ccf82a4c Move the auto-sizing of the callout array from init_param2() to
kern_timeout_callwheel_alloc() where it is actually used.

This is a mechanical move and no tuning parameters are changed.

The pre-allocated callout array is only used for legacy timeout(9)
calls and is only allocated and active on cpu0.  Eventually all
remaining users of timeout(9) should switch to the callout_* API.

Reviewed by:	davide
2013-03-08 10:14:58 +00:00
Davide Italiano
5b999a6be0 - Make callout(9) tickless, relying on eventtimers(4) as backend for
precise time event generation. This greatly improves granularity of
callouts which are not anymore constrained to wait next tick to be
scheduled.
- Extend the callout KPI introducing a set of callout_reset_sbt* functions,
which take a sbintime_t as timeout argument. The new KPI also offers a
way for consumers to specify precision tolerance they allow, so that
callout can coalesce events and reduce number of interrupts as well as
potentially avoid scheduling a SWI thread.
- Introduce support for dispatching callouts directly from hardware
interrupt context, specifying an additional flag. This feature should be
used carefully, as long as interrupt context has some limitations
(e.g. no sleeping locks can be held).
- Enhance mechanisms to gather informations about callwheel, introducing
a new sysctl to obtain stats.

This change breaks the KBI. struct callout fields has been changed, in
particular 'int ticks' (4 bytes) has been replaced with 'sbintime_t'
(8 bytes) and another 'sbintime_t' field was added for precision.

Together with:	mav
Reviewed by:	attilio, bde, luigi, phk
Sponsored by:	Google Summer of Code 2012, iXsystems inc.
Tested by:	flo (amd64, sparc64), marius (sparc64), ian (arm),
		markj (amd64), mav, Fabian Keil
2013-03-04 11:09:56 +00:00
Andre Oppermann
371407162b Move the mbuf memory limit calculations from init_param2() to
tunable_mbinit() where it is next to where it is used later.

Change the sysinit level of tunable_mbinit() from SI_SUB_TUNABLES
to SI_SUB_KMEM after the VM is running.  This allows to use better
methods to determine the effectively available physical and virtual
memory available to the kernel.

Update comments.

In a second step it can be merged into mbuf_init().
2013-01-17 21:28:31 +00:00
Alfred Perlstein
17ebe960a6 Do not autotune ncallout to be greater than 18508.
When maxusers was unrestricted and maxfiles was allowed to autotune
much higher the result was that ncallout which was based on maxfiles
and maxproc grew much higher than was needed.

To fix this clip autotuning to the same number we would get with
the old maxusers algorithm which would stop scaling at 384
maxusers.

Growing ncalout higher is not likely to be needed since most consumers
of timeout(9) are gone and any higher value for ncallout causes the
callwheel hashes to be much larger than will even be needed for
most applications.

MFC after:      1 month

Reviewed by:	mav
2013-01-15 19:26:17 +00:00
Andrey Zonov
0165f660c1 - Detect when we are in KVM.
Silence on:	emulation
Approved by:	kib (mentor)
MFC after:	1 week
2013-01-15 14:05:59 +00:00
Neel Natu
a09580e7a3 Teach the kernel to recognize that it is executing inside a bhyve virtual
machine.

Obtained from:	NetApp
2013-01-05 19:18:50 +00:00
Andre Oppermann
0060bab556 Prevent long type overflow of realmem calculation on ILP32 by forcing
calculation to be in quad_t space.  Fix style issue with second parameter
to qmin().

Reported by:	alc
Reviewed by:	bde, alc
2012-12-10 12:19:03 +00:00
Andre Oppermann
df905a2bd3 Using a long is the wrong type to represent the realmem and maxmbufmem
variable as they may overflow on i386/PAE and i386 with > 2GB RAM.

Use 64bit quad_t instead.  It has broader kernel infrastructure support
with TUNABLE_QUAD_FETCH() and qmin/qmax() than other available types.

Pointed out by:	alc, bde
2012-11-29 07:30:42 +00:00
Andre Oppermann
ead46972a4 Base the mbuf related limits on the available physical memory or
kernel memory, whichever is lower.  The overall mbuf related memory
limit must be set so that mbufs (and clusters of various sizes)
can't exhaust physical RAM or KVM.

The limit is set to half of the physical RAM or KVM (whichever is
lower) as the baseline.  In any normal scenario we want to leave
at least half of the physmem/kvm for other kernel functions and
userspace to prevent it from swapping too easily.  Via a tunable
kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm.

At the same time divorce maxfiles from maxusers and set maxfiles to
physpages / 8 with a floor based on maxusers.  This way busy servers
can make use of the significantly increased mbuf limits with a much
larger number of open sockets.

Tidy up ordering in init_param2() and check up on some users of
those values calculated here.

Out of the overall mbuf memory limit 2K clusters and 4K (page size)
clusters to get 1/4 each because these are the most heavily used mbuf
sizes.  2K clusters are used for MTU 1500 ethernet inbound packets.
4K clusters are used whenever possible for sends on sockets and thus
outbound packets.  The larger cluster sizes of 9K and 16K are limited
to 1/6 of the overall mbuf memory limit.  When jumbo MTU's are used
these large clusters will end up only on the inbound path.  They are
not used on outbound, there it's still 4K.  Yes, that will stay that
way because otherwise we run into lots of complications in the
stack.  And it really isn't a problem, so don't make a scene.

Normal mbufs (256B) weren't limited at all previously.  This was
problematic as there are certain places in the kernel that on
allocation failure of clusters try to piece together their packet
from smaller mbufs.

The mbuf limit is the number of all other mbuf sizes together plus
some more to allow for standalone mbufs (ACK for example) and to
send off a copy of a cluster.  Unfortunately there isn't a way to
set an overall limit for all mbuf memory together as UMA doesn't
support such a limiting.

NB: Every cluster also has an mbuf associated with it.

Two examples on the revised mbuf sizing limits:

1GB KVM:
 512MB limit for mbufs
 419,430 mbufs
  65,536 2K mbuf clusters
  32,768 4K mbuf clusters
   9,709 9K mbuf clusters
   5,461 16K mbuf clusters

16GB RAM:
 8GB limit for mbufs
 33,554,432 mbufs
  1,048,576 2K mbuf clusters
    524,288 4K mbuf clusters
    155,344 9K mbuf clusters
     87,381 16K mbuf clusters

These defaults should be sufficient for even the most demanding
network loads.

MFC after:	1 month
2012-11-27 21:19:58 +00:00
Alfred Perlstein
79f62ed690 Allow maxusers to scale on machines with large address space.
Some hooks are added to clamp down maxusers and nmbclusters for
small address space systems.

VM_MAX_AUTOTUNE_MAXUSERS - the max maxusers that will be autotuned based on
physical memory.
VM_MAX_AUTOTUNE_NMBCLUSTERS - max nmbclusters based on physical memory.

These are set to the old values on i386 to preserve the clamping that was
being done to all arches.

Another macro VM_AUTOTUNE_NMBCLUSTERS is provided to allow an override
for the calculation on a MD basis.  Currently no arch defines this.

Reviewed by: peter
MFC after: 2 weeks
2012-11-10 02:08:40 +00:00
Alfred Perlstein
7b6d92c0a0 Allow autotune maxusers > 384 on 64 bit machines
A default install on large memory machines with multiple 10gigE interfaces
were not being given enough mbufs to do full bandwidth TCP or NFS traffic.

To keep the value somewhat reasonable, we scale back the number of
maxuers by 1/6 past the 384 point.  This gives us enough mbufs for most
of our pretty basic 10gigE line-speed tests to complete.
2012-10-25 01:46:20 +00:00
Andrey Zonov
ceb0f71506 - Mark some sysctls with CTLFLAG_TUN flag instead of CTLFLAG_RDTUN.
Pointed out by:	avg
Approved by:	kib (mentor)
MFC after:	1 week
2012-09-03 09:26:56 +00:00
Andrey Zonov
c3927cd956 - Make kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, kern.dflssiz, kern.maxssiz
and kern.sgrowsiz sysctls writable.

Approved by:	kib (mentor)
2012-09-02 17:39:02 +00:00
Konstantin Belousov
3fa615bc11 As a safety measure, disable lowering pid_max too much.
Requested by:	Peter Jeremy <peter@rulingia.com>
MFC after:	1 week
2012-08-16 13:04:21 +00:00
Konstantin Belousov
02c6fc2114 Add a sysctl kern.pid_max, which limits the maximum pid the system is
allowed to allocate, and corresponding tunable with the same
name. Note that existing processes with higher pids are left intact.

MFC after:	1 week
2012-08-15 15:56:21 +00:00
Alan Cox
e9a3f7852d Modestly increase the maximum allowed size of the kmem map on i386.
Also, express this new maximum as a fraction of the kernel's address
space size rather than a constant so that increasing KVA_PAGES will
automatically increase this maximum.  As a side-effect of this change,
kern.maxvnodes will automatically increase by a proportional amount.

While I'm here ensure that this change doesn't result in an unintended
increase in maxpipekva on i386.  Calculate maxpipekva based upon the
size of the kernel address space and the amount of physical memory
instead of the size of the kmem map.  The memory backing pipes is not
allocated from the kmem map.  It is allocated from its own submap of
the kernel map.  In short, it has no real connection to the kmem map.
(In fact, the commit messages for the maxpipekva auto-sizing talk
about using the kernel map size, cf. r117325 and r117391, even though
the implementation actually used the kmem map size.)  Although the
calculation is now done differently, the resulting value for
maxpipekva should remain almost the same on i386.  However, on amd64,
the value will be reduced by 2/3.  This is intentional.  The recent
change to VM_KMEM_SIZE_SCALE on amd64 for the benefit of ZFS also had
the unnecessary side-effect of increasing maxpipekva.  This change is
effectively restoring maxpipekva on amd64 to its prior value.

Eliminate init_param3() since it is no longer used.
2011-03-23 16:38:29 +00:00
Sergey Kandaurov
4053b05b91 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
Christian S.J. Peron
ea235a1449 Add Xen to the list of virtual vendors. In the non PV (HVM) case this fixes
the virtualization detection successfully disabling the clflush instruction.
This fixes insta-panics for XEN hvm users when the hw.clflush_disable
tunable is -1 or 0 (-1 by default).

Discussed with:	jhb
2010-08-06 15:04:40 +00:00
Nathan Whitehorn
bcebf6a165 Reverse the logic of the if statement that sets the default value of
HZ; the list of 1000 Hz platforms was getting unwieldy.

Suggested by:	marcel
2010-06-24 00:27:20 +00:00
Nathan Whitehorn
e864acd42f Move default HZ from 100 to 1000 on powerpc.
Reviewed by:	marcel
MFC after:	2 weeks
2010-06-23 23:26:14 +00:00
Ivan Voras
07ce8d9b43 Document the VM detection type and sysctl a bit better. 2010-03-02 23:57:42 +00:00
Alan Cox
0b993ee5fd When running as a guest operating system, the FreeBSD kernel must assume
that the virtual machine monitor has enabled machine check exceptions.
Unfortunately, on AMD Family 10h processors the machine check hardware
has a bug (Erratum 383) that can result in a false machine check exception
when a superpage promotion occurs.  Thus, I am disabling superpage
promotion when the FreeBSD kernel is running as a guest operating system
on an AMD Family 10h processor.

Reviewed by:	jhb, kib
MFC after:	3 days
2010-02-27 18:00:57 +00:00
Brooks Davis
2e5514defa Don't inforce an upper bound on kern.ngroups. The INT_MAX-1 limit was
too high due to several overflows.  The actual limit is somewhere in the
neighborhood of INT_MAX/4 on 64-bit machines, but most systems could not
support such a limit due to a lack of memory and the cost of duplicate
credentials.

Reported by:	bde
2010-02-24 15:52:18 +00:00
Brooks Davis
412f9500e2 Replace the static NGROUPS=NGROUPS_MAX+1=1024 with a dynamic
kern.ngroups+1.  kern.ngroups can range from NGROUPS_MAX=1023 to
INT_MAX-1.  Given that the Windows group limit is 1024, this range
should be sufficient for most applications.

MFC after:	1 month
2010-01-12 07:49:34 +00:00
Mike Silbersack
347e22a68b Increase HZ_VM from 10 to 100. While 10 hz saves cpu time
under VM environments, it's too slow for FreeBSD to work
properly.  For example, ping at 10hz pings about every 600ms
instead of about every second.

Approved by:	re (kib)
2009-07-08 01:09:12 +00:00
John Baldwin
9b84ba1cbb Improve the description of a few sysctls.
Submitted by:	bde (partially)
MFC after:	3 days
2009-03-23 20:18:06 +00:00
John Baldwin
42dd14bada Change the sysctls for maxbcache and maxswzone from int to long. I missed
this earlier since these sysctls don't exist in 7.x yet.
2009-03-12 17:23:02 +00:00
John Baldwin
b9f2a7da58 Export the current values of nbuf, ncallout, and nswbuf via read-only
sysctls that match the tunable names.

MFC after:	3 days
2009-03-12 17:21:58 +00:00
John Baldwin
64ecd1399f - Make maxpipekva a signed long rather than an unsigned long as overflow
is more likely to be noticed with signed types.
- Make amountpipekva a long as well to match maxpipekva.

Discussed with:	bde
2009-03-10 21:28:43 +00:00
John Baldwin
5bd65606f4 Adjust some variables (mostly related to the buffer cache) that hold
address space sizes to be longs instead of ints.  Specifically, the follow
values are now longs: runningbufspace, bufspace, maxbufspace,
bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace,
hirunningspace, maxswzone, maxbcache, and maxpipekva.  Previously, a
relatively small number (~ 44000) of buffers set in kern.nbuf would result
in integer overflows resulting either in hangs or bogus values of
hidirtybuffers and lodirtybuffers.  Now one has to overflow a long to see
such problems.  There was a check for a nbuf setting that would cause
overflows in the auto-tuning of nbuf.  I've changed it to always check and
cap nbuf but warn if a user-supplied tunable would cause overflow.

Note that this changes the ABI of several sysctls that are used by things
like top(1), etc., so any MFC would probably require a some gross shims
to allow for that.

MFC after:	1 month
2009-03-09 19:35:20 +00:00