Commit Graph

130 Commits

Author SHA1 Message Date
Bruce Evans
81ab2caf0a Replaced nxreset by noreset (if the reset function gets called, then the
device must be configured.  It's hard to tell whether a reset function
should be noreset or nullreset since reset functions are never called.
Most drivers use nullreset but noreset has the advantage of complaining
if somehow gets called).
1995-12-10 20:54:38 +00:00
Bruce Evans
26ec204be0 Replaced nxmmap by nommap (if the mmap function gets called, then the
device must be configured).
1995-12-10 20:34:53 +00:00
Bruce Evans
c73feca0b7 Removed new alias d_size_t for d_psize_t.
Removed old aliases d_rdwr_t and d_ttycv_t for d_read_t/d_write_t and
d_devtotty_t.

Sorted declarations of switch functions into switch order.

Removed duplicated comments and declarations of nonexistent switch
functions.
1995-12-10 15:55:34 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
David Greenman
efeaf95a41 Untangled the vm.h include file spaghetti. 1995-12-07 12:48:31 +00:00
Bruce Evans
0310c19f5d Replaced #includes of <sys/user.h> by less gross headers, usually
<sys/vm.h>.  Many device drivers need only the definition of vtophys()
from vm.

Added nearby #includes of <sys/conf.h> where appropriate.
1995-12-06 23:52:35 +00:00
Peter Wemm
80308cade5 aargh! I tested JREMOD, only to discover that the "good oil" part of
it for si.c was accidently inside some #ifdef DEBUG code....
1995-12-04 17:33:45 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
Bruce Evans
43cbfcb357 Removed all #includes of the unused file <sys/device.h>. 1995-11-28 07:29:59 +00:00
Peter Wemm
070fc2ce12 Mainly cosmetic cleanups... It now uses more consistant message reporting
on the console, and no longer uses "SLXOS" which I suspect may be a
trademark... (I'm not sure, but this is not really a SLXOS driver anyway)
1995-11-28 02:07:36 +00:00
Peter Wemm
5d0bad8280 Sync the public source with what I'm currently running.
Most of this is cleaning up, but there are some functional changes,
doc/comment improvements, error checking, gcc -Wall cleanups.  Input buffer
flushing is enabled now, although I'm still not quite certain it's right.
1995-11-09 21:53:48 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Bruce Evans
4fda91c705 Moved prototypes for devswitch functions from conf.c and driver sources
to <machine/conf.h>.  conf.h was mechanically generated by
`grep ^d_ conf.c >conf.h'.  This accounts for part of its ugliness.  The
prototypes should be moved back to the driver sources when the functions
are staticalized.
1995-11-04 13:25:33 +00:00
Poul-Henning Kamp
4ccc87c594 Remove unused functions and variables, make things static, and other cleanups. 1995-10-28 15:39:31 +00:00
Peter Wemm
494850b8d1 Remove bogus #include <sys/device.h>, and the bogus instances of
"struct device" and the bogus unit number mentioned in the error message.
Some other minor cleanups, all trivial.
1995-10-21 09:10:49 +00:00
Peter Wemm
e0ad6557c5 Add some hooks visible from outside via nlist, so pstat can read the tty
state.
1995-09-22 20:00:12 +00:00
Peter Wemm
b769f8efd6 Remove the "Danger will robinson!" printf's at the start. I'm pretty happy
with the driver's stability now.  I've not had a single problem with it for
weeks..  All that remains is a bit of performance tuning, and finishing
the manpages.
1995-09-22 18:28:21 +00:00
Peter Wemm
832e06d4dc From Bruce Evans: (prototype related changes, other cleanups)
Add prototypes.  Use static for function definitions to match existing
prototypes.  Otherwise leave functions that should be static as extern.
TODO: declare everthing except sidriver and siintr as static.  I use
some new cdevs registration functions to do this for syscons and pcvt.

Fix siintr() to match its prototype in ioconf.c (don't return anything).
This may break the eisa support, but Julian says that eisa interrupts
never worked anyway.

(EISA support was never tested anyway - Peter)

Submitted by:	bde
1995-09-13 08:45:28 +00:00
Peter Wemm
fbb8b7bb60 Move some kernel-only stuff to a kernel-only file.
Submitted by:	bde
1995-09-13 08:39:28 +00:00
Peter Wemm
c91214d4b8 Restore two checks for TS_ISOPEN.. I managed to panic my machine
without them..  I thought TS_CONNECTED implied TS_ISOPEN, but apparently
that's not the case.
1995-09-11 06:28:38 +00:00
Peter Wemm
5275513295 Fix some outstanding bugs in the DCD modem control..
Implement the slip/ppp "hotchar" detection to improve latency
Debug the L_RINT bypass code..
Fix an interesting feature that caused 8-bit chars to loose their top bit
in some circumstances..

This finishes the remaining outstanding problems that I'm aware of, with
the exception of efficiency...  Optimizing can come later after it's fully
debugged.
1995-08-22 00:48:17 +00:00
Peter Wemm
d3497bc8de add a new Debug mode.. "DBG_OPTIM" - for observing the L_RINT bypass 1995-08-22 00:42:07 +00:00
Peter Wemm
1cf4903ecd Slight change to the location of the default termios flags to make them
a little easier to change, and revert to the "standard" specialix behavior
with CRTSCTS enabled in the initial cflag (but configurable).
1995-08-13 15:44:37 +00:00
Peter Wemm
bb65956af3 Next round of cleanups. Some more debugging hooks added, si_softc definition
moved to the driver proper, so that <machine/si.h> can be #included by user
programs without needing to include stuff from /sys/i386/isa..
Various (now) redundant features removed, eg: the locks on IXANY and HWFLOW
as these are now done with the "initial" and "lock" termios devices.
Note that it still (for reasons unknown) appears to be masking data to
7-bit with ppp - hence the cleanup to support the debugging via 'sicontrol'
1995-08-13 15:18:05 +00:00
Peter Wemm
f64003830d Remove a deliberate #warning.. It's not polite, because I listed the the
driver in i386/conf/LINT...
Reviewed by:
Submitted by:
Obtained from:
1995-08-10 08:48:34 +00:00
Peter Wemm
b77990be3e Bring in my long-overdue version of the Specialix driver.
This was originally ported to BSDI by Andy Rutter <andy@acronym.co.uk>.
At the end of the day, this code has very little in common with Andy's
version, or the Specialix SYSV version.  Essentially it has been gradually
and almost completely rewritten, with LOTS of advice and inspiration from
Bruce Evans.  There are a couple of missing bits still, but they are minor.

The user-mode "sicontrol" program is in sad shape and will come in soon.
Transparent printing died a timely death.. Maybe later..

Jeremy Rolls @ Specialix (Development directory) has confirmed this is OK
to distribute, and Andy personally sent me his version that I started from.

Although this driver stood up to a nasty stress-test in this form, I am not
confident that there are no nasty bugs lurking.

People are welcome to try it, but dont go out and buy one just yet.. :-)
And *DONT* use it on a mission-critical machine... This is ALPHA QUALITY!
1995-08-09 13:13:47 +00:00