On case-insensitive file systems (most likely to be seen on macOS, where
it is the default), _Fork.o for the new POSIX _Fork function conflicts
with _fork.o for the PSEUDO file. This results in non-determinsitic
behaviour in terms of which ends up being present; if _Fork.o wins then
the build fails to link libc.so due to missing __sys_fork, and if
_fork.o wins then libc silently fails to include the implementation of
_Fork. A similar issue occurred in the past for C99's _Exit conflicting
with exit(2) and was fixed in cb1cb6a2a8, so this adds a fix based on
that.
As a longer-term solution it might be better to instead make the
generated files use a different prefix that's less likely to conflict
with other things (such as __sys_foo.o given they always contain that)
but that's a rather more invasive change.
Fixes: 49ad342cc1 ("Add _Fork()")
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31895
First edition Unix had an /etc/tabs file. It contained the escape
sequences to set tabs to every 8 stops on an old Teletype Model 37 and
compatible terminals. One would 'cat /etc/tabs' to reset them. Unix at
the time effectively mandated this because the delays in the tty driver
assumed this and tabs didn't work when they were too different from '8'.
Document this historical niggle in HISTORY after it was brought to my
attention on a Hacker News thread.
Sponsored by: Netflix
Add some new OpenSSH v8.7p1 source files to the ones being used to
build libssl to avoid missing symbols.
PR: 258384
Fixes: 19261079b7 ("openssh: update to OpenSSH v8.7p1")
Approved by: kevans (src)
Currently hkbd counts all key states to be "Up" at the start of
interrupt callback. That results in generation of "Key Up" event for
each key that has been downed before but is not listed in current
report while is still downed.
Fix that with clearing of temporary key data storage bits only for
keys contained in processed report.
Reported by: Greg V
Obtained from: sysutils/iichid
MFC after: 2 weeks
r123442 introduced solution for clamping of PS/2 mice jitter when using
a KVM. Solution is to buffer mouse packets for 0.050ms if mouse activity
has not been seen for more than 0.5 seconds. Then flush that data to driver
if no validation errors found or drop the entire queue otherwise.
While it works well with relative devices it has issues with absolute ones
Depending on history buffering may results in delaying of the touch front
edge for 0.050ms that affects gesture processing (tap detection).
As absolute touchpads usually are built-in devices we can safely disable
bufferization and KVM jitter clamping to avoid such a delays.
MFC after: 2 weeks
- Some configurations, e.g. HP EliteBook 840 G3, come with a dummy card
in the card slot which is detected as a valid SD card. This added long
timeout at boot time. To alleviate the problem, the default timeout is
reduced to one second during the setup phase. [1]
- Some configurations crash at boot if rtsx(4) is defined in the kernel
config. At boot time, without a card inserted, the driver found that
a card is present and just after that a "spontaneous" interrupt is
generated showing that no card is present. To solve this problem,
DELAY(9) is set to one quarter of a second before checking card presence
during driver attach.
- As advised by adrian, taskqueue and DMA are set up sooner during
the driver attach. A heuristic to try to detect configuration needing
inversion was added.
PR: 255130 [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30499
For kernel to send snapshot mount/unmount events to zed.
For kernel to send symlink creates/removes on zvol plumbing.
(/dev/run/dsk/zvol/$pool/$zvol -> /dev/diskX)
If zed misses the ENODEV, all errors after are EINVAL. Treat any error
as kernel module failure.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#12416
Kernel commits
332f606b32b6 ovl: enable RCU'd ->get_acl()
0cad6246621b vfs: add rcu argument to ->get_acl() callback
Added compatibility code to detect the new ->get_acl() interface
and correctly handle the case where the new rcu argument is set.
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12548
The patch converting fetch to getline
(ee3ca711a8),
did confuse the capacity of the line buffer with the actual len of the read
line confusing fetch -v.
When zfs_send_corrupt_data is set, use the TRAVERSE_HARD flag,
so traverse_visitbp() will not fail with ECKSUM if a blockpointer
cannot be read, but rather will continue and send the objects it can.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-By: Klara Inc.
Sponsored-By: WHC Online Solutions Inc.
Closes#12541
osd_register(9) may reallocate and expand the destructor array for a
given object type if no space is available for a new key. This happens
with the object lock held. Thus, when verifying that a given slot in
the array is occupied, we need to hold the object lock to avoid racing
with a reallocation.
Reported by: syzbot+69ce54c7d7d813315dd3@syzkaller.appspotmail.com
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Two local changes were committed upstream and are present in OpenSSH
8.7p1. Remove references from FREEBSD-upgrade now that we have updated
to that version.
Unlike the other syscalls these two symbols were missing from the
version script. I noticed this while looking into the compiler-rt
runtime libraries for CHERI.
Reviewed by: brooks
Obtained from: https://github.com/CTSRD-CHERI/cheribsd/pull/1063
MFC after: 3 days
The behavior remains the same, but lualoader now uses the more concise
verbiage that forthloader used. This is particularly important because
the previous line would exceed the right boundary of the menu and run
straight into space that would typically be allowed for the logo.
This makes it slightly easier to port logos from forthloader to
lualoader.
5fcdc19a81 didn't fully resolve the issue. There remains a report
that an ifconfig wlan0 up by itself is insufficient. Ifconfig down
must precede it.
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Fixes: 5fcdc19a81
MFC after: 3 days
Although it is not specified in the RFCs, the concept that
the NFSv4 server should reply to an RPC request within a
reasonable time is accepted practice within the NFSv4 community.
Without this patch, the NFSv4.2 server attempts to reply to
a Copy operation within 1 second by limiting the copy to
vfs.nfs.maxcopyrange bytes (default 10Mbytes). This is crude at
best, given the large variation in I/O subsystem performance.
This patch uses the COPY_FILE_RANGE_TIMEO1SEC flag added by
commit c5128c48df to limit the reply time for a Copy
operation to approximately 1 second.
MFC after: 2 weeks
Unfortunately, there was an overzealous assertion that was (in pretty
specific circumstances) false, causing failure. This assertion was
added in error, so we're removing it.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#9897Closes#12020Closes#12246
Unfortunately macOS reserves inode ID numbers 0-15, and we can
not used them. In macOS port we simply map them really high IDs.
Normally this is hidden inside the _os implementation, but this is
the one place in the common source files.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#12530
We round up the psize to the nearest multiple of the asize or to the
lsize, whichever is smaller. Once that's done, we allocate a new
buffer of the appropriate size, zero the tail, and copy the data
into it. This adds a small performance cost to these kinds of writes,
but fixes the bookkeeping problems.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Matthew Ahrens <matthew.ahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12522Closes#8462
Kernel commits
39f75da7bcc8 ("isystem: trim/fixup stdarg.h and other headers")
c0891ac15f04 ("isystem: ship and use stdarg.h")
564f963eabd1 ("isystem: delete global -isystem compile option")
(for now can be found in linux-next.git tree, will land into the
Linus' tree during the ongoing 5.15 cycle with one of akpm merges)
removed the -isystem flag and disallowed the inclusion of any
compiler header files. They also introduced a minimal
<linux/stdarg.h> as a replacement for <stdarg.h>.
include/os/linux/spl/sys/cmn_err.h in the ZFS source tree includes
<stdarg.h> unconditionally. Introduce a test for <linux/stdarg.h>
and include it instead of the compiler's one to prevent module
build breakage.
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#12531
When port reuse is enabled in a one-to-one-style socket, sctp_listen()
may call sctp_swap_inpcb_for_listen() to move the PCB out of the "TCP
pool". In so doing it will drop the PCB lock, yielding an LOR since we
now hold several socket locks. Reorder sctp_listen() so that it
performs this operation before beginning the conversion to a listening
socket. Also modify sctp_swap_inpcb_for_listen() to return with PCB
write-locked, since that's what sctp_listen() expects now.
Reviewed by: tuexen
Fixes: bd4a39cc93 ("socket: Properly interlock when transitioning to a listening socket")
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31879
Same as the v4 test, but with IPv6.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31789
Test prioritisation and dummynet queues.
We need to give the pipe sufficient bandwidth for dummynet to work.
Given that we can't rely on the TCP connection failing alltogether, but
we can measure the effect of dummynet by imposing a time limit on a
larger data transfer.
If TCP is prioritised it'll get most of the pipe bandwidth and easily
manage to transfer the data in 3 seconds or less. When not prioritised
this will not succeed.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31788
Introduce a link to the ipfw command, dnctl, for dummynet configuration.
dnctl only handles dummynet configuration, and is part of the effort to
support dummynet in pf.
/sbin/ipfw continues to accept pipe, queue and sched commands, but these can
now also be issued via the new dnctl command.
Reviewed by: donner
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30465
The 5.15 kernel moved the backing_dev_info structure out of
the request queue structure which causes a build failure.
Rather than look in the new location for the BDI we instead
detect this upstream refactoring by the existance of either
the blk_queue_update_readahead() or disk_update_readahead()
functions. In either case, there's no longer any reason to
manually set the ra_pages value since it will be overridden
with a reasonable default (2x the block size) when
blk_queue_io_opt() is called.
Therefore, we update the compatibility wrapper to do nothing
for 5.9 and newer kernels. While it's tempting to do the
same for older kernels we want to keep the compatibility
code to preserve the existing behavior. Removing it would
effectively increase the default readahead to 128k.
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12532
We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
Because lld 13 and higher default to garbage collecting start/stop
symbols when using --gc-sections, the linker sets used in the i386 boot
loaders will disappear. This leads to the loaders not recognizing any
commands, and failure to boot.
Until we have a good set of linker scripts for the loaders, work around
it by disabling the start-stop-gc feature.
MFC after: 1 week
When running in a virtualized environment, TLB invalidations can only
be performed on process scope, as only the hypervisor is allowed to
invalidate a global scope, or else a Program Interrupt is triggered.
Since we are here, also make sure that the register process table
hypercall returns success.
Reviewed by: jhibbits
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D31775