nslexer.o depends on nsparser.h, which is already added by bsd.lib.mk
and .depend.
This reverts r237402.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
intended behaviour in its man page. Simplify tty_drain() to match.
Don't call ttydevsw methods in tty_flush() if the device is gone
since we now sometimes call it then.
The flushing was supposed to be implemented by passing the FNONBLOCK
flag to VOP_CLOSE() for revoke(). The tty driver is one of the few
that can block in close and was one of the fewer that knew about this.
This almost worked in FreeBSD-1 and similarly in Net/2. These
versions only almost worked because there was and is considerable
confusion between IO_NDELAY and FNONBLOCK (aka O_NONBLOCK). IO_NDELAY
is only valid for VOP_READ() and VOP_WRITE(). For other VOPs it has
the same value as O_SHLOCK. But since vfs_subr.c and tty.c
consistently used the wrong flag and the O_SHLOCK flag is rarely set,
this mostly worked. It also gave the feature than applications could
get the non-blocking close by abusing O_SHLOCK.
This was first broken then fixed in 1995. I changed only the tty
driver to use FNONBLOCK, as a hack to get non-blocking via the normal
flag FNONBLOCK for last closes. I didn't know about revoke()'s use
of IO_NDELAY or change it to be consistent, so revoke() was broken.
Then I changed revoke() to match.
This was next broken in 1997 then fixed in 1998. Importing Lite2 made
the flags inconsistent again by undoing the fix only in vfs_subr.c.
This was next broken in 2008 by replacing everything in tty.c and not
checking any flags in last close. Other bugs in draining limited the
resulting unbounded waits to drain in some cases.
It is now possible to fix this better using the new FREVOKE flag.
Just restore flushing for revoke() for now. Don't restore or undo any
hacks for ordinary last closes yet. But remove dead code in the
1-second relative timeout (r272789). This did extra work to extend
the buggy draining for revoke() for as long as possible. The 1-second
timeout made this not very long by usually flushing after 1 second.
Submitted by: bde
MFC after: 2 weeks
by application closing its stdin (i.e. STDIN_FILENO) prior to
calling readpassphrase WITHOUT setting RPP_STDIN. What happens
then is that the readpassphrase would open /dev/tty, and since
file descriptors are reused, the call would return first unused
fd, which is 0 which is also STDIN_FILENO. Then due to the usage
of "input != STDIN_FILENO" in the code to do its logic, that
would result in noecho flags not set on that file descriptor,
which was original issue I've been trying to fix.
In addition to that, the readpassphrase() would leak file
descriptor on its way out, so fix that one as well.
This problem can be tested with:
$ ssh-add - < /tmp/myprivate.key
The password will not be hidden as it should and ktrace will
show:
53326 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
53326 ssh-add NAMI "/dev/tty"
53326 ssh-add RET open 0
53326 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd5e0)
53326 ssh-add RET sigprocmask 0
53326 ssh-add CALL sigaction(SIGALRM,0x7fffffffd630,0x7fffffffd610)
Instead of:
57690 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
57690 ssh-add NAMI "/dev/tty"
57690 ssh-add RET open 4
57690 ssh-add CALL ioctl(0x4,TIOCGETA,0x7fffffffd860)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL ioctl(0x4,TIOCSETAF,0x7fffffffd680)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd620)
57690 ssh-add RET sigprocmask 0
57690 ssh-add CALL sigaction(SIGALRM,0x7fffffffd670,0x7fffffffd650)
For the case when the key is read from the file.
Technically this can also be workaround'ed at the application side
by not closing the STDIN_FILENO in the first place, but readpassphrase(3)
doesn't need to make any assumptions about that. Plus the file descriptor
leak confirms that this is an oversight, rather than a deliberate behaviour.
MFC after: 1 week
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
All gmon want's is a region of memory without the overhead of malloc().
Just mapping some pages with mmap is an easy way to accomplish this.
Approved by: jhb, cem, emaste
Obtained from: CheriBSD (bf33e1e70b)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D5005
The PSEUDO* macros should not declare <syscall>, only _<syscall> and
__sys_<syscall>. This was causing the interposing C wrappers to be
ignored due to link order.
Reviewed by: kib
Obtained from: CheriBSD (4e8e13c90f)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D4097
tdelete() is supposed to return the address of the parent node that has
been deleted. We already keep track of this node in the loop between
lines 94-107. The GO_LEFT()/GO_RIGHT() macros are used later on as well,
so we must make sure not to change it to something else.
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206178
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
MFC after: 1 week
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206177
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
MFC after: 1 week
* Fix __FreeBSD_version check.
* Update history section in man page.
An MFC of this commit to stable/10 will allow using the new system calls
instead of the fallback.
MFC after: 3 days
This fixes the potential NULL pointer dereference properly, and also fixes
memory leaks encountered in the process of iterating through `*rp`.
MFC after: 1 week
Found by: Valgrind
Reported by: Dan Roberts <dan.roberts@isilon.com>
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
__rpcbind_is_up(..) if getnetconfig(3) is partly successful in allocating
resources, but not completely successful by moving the endnetconfig(3) call
up before we return from the function if nconf == NULL.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
In the event that the getconfig(3) call in svcunix_create is partly successful,
some of the netconfig(3) resources allocated might be leaked if the call returns
NULL as endnetconfig(3) wasn't called explicitly in that case. Ensure that the
resources are fully cleaned up by going to the `done` label, which will call
endnetconfig(3) for us.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
up to now.
The new sendfile is the code that Netflix uses to send their multiple tens
of gigabits of data per second. The new implementation features asynchronous
I/O, when I/O operations are launched, but not awaited to be complete. An
explanation of why such behavior is beneficial compared to old one is
going to be too long for a commit message, so we will skip it here.
Additional features of new syscall are extra flags, which provide an
application more control over data sent. The SF_NOCACHE flag tells
kernel that data shouldn't be cached after it was sent. The SF_READAHEAD()
macro allows to specify readahead size in pages.
The new syscalls is a drop in replacement. No modifications are required
to applications. One can take nginx binary for stable/10 and run it
successfully on head. Although SF_NODISKIO lost its original sense, as now
sendfile doesn't block, and now means something completely different (tm),
using the new sendfile the old way is absolutely safe.
Celebrates: Netflix global launch!
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
Relnotes: yes
Set _PATH_DEFPATH to
/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin. This is the
path in the default class in the default /etc/login.conf,
excluding ~/bin which would not be expanded properly in a string
constant.
For normal logins, _PATH_DEFPATH is overridden by /etc/login.conf,
~/.login_conf or shell startup files. _PATH_DEFPATH is still used as a
default by execlp(), execvp(), posix_spawnp() and sh if PATH is not set, and
by cron. Especially the latter is a common trap (most recently in PR
204813).
PR: 204813
Reviewed by: secteam (delphij), alfred
aligned on a int64_t boundary. However, when we allocate the array of
these structures, we use ALIGNBYTES which defaults to sizeof(int) on
arm, i386 and others. The i386 stuff can handle unaligned accesses
seemlessly. However, arm cannot. Take this into account when creating
the array of FILEs, and add some comments about why.
Differential Revision: https://reviews.freebsd.org/D4708
(CLOCK_REALTIME case) system calls is non negative.
This commit hides a kernel panic in atrtc_settime() as the clock_ts_to_ct()
does not properly convert negative tv_sec.
ps. in my opinion clock_ts_to_ct() should be rewritten to properly handle
negative tv_sec values.
Differential Revision: https://reviews.freebsd.org/D4714
Reviewed by: kib
MFC after: 1 week
Traditionally the hcreate() function creates a hash table that uses
chaining, using a fixed user-provided size. The problem with this
approach is that this often either wastes memory (table too big) or
yields bad performance (table too small). For applications it may not
always be easy to estimate the right hash table size. A fixed number
only increases performance compared to a linked list by a constant
factor.
This problem can be solved easily by dynamically resizing the hash
table. If the size of the hash table is at least doubled, this has no
negative on the running time complexity. If a dynamically sized hash
table is used, we can also switch to using open addressing instead of
chaining, which has the advantage of just using a single allocation for
the entire table, instead of allocating many small objects.
Finally, a problem with the existing implementation is that its
deterministic algorithm for hashing makes it possible to come up with
fixed patterns to trigger an excessive number of collisions. We can
easily solve this by using FNV-1a as a hashing algorithm in combination
with a randomly generated offset basis.
Measurements have shown that this implementation is about 20-25% faster
than the existing implementation (even if the existing implementation is
given an excessive number of buckets). Though it allocates more memory
through malloc() than the old implementation (between 4-8 pointers per
used entry instead of 3), process memory use is similar to the old
implementation as if the estimated size was underestimated by a factor
10. This is due to the fact that malloc() needs to perform less
bookkeeping.
Reviewed by: jilles, pfg
Obtained from: https://github.com/NuxiNL/cloudlibc
Differential Revision: https://reviews.freebsd.org/D4644
POSIX requires for the c99 compiler.
(In fact, our c99(1) already ignores -lxnet; but our make(1) doesn't set
${CC} correctly, and our cc(1) treats xnet like any other library.)
Reviewed by: kib
450 seconds
This is required on slower network connections, and on older releases
(stable/10 seems to be slower as far as name resolution goes.. not sure
why yet).
Remove an outdated comment in the Makefile from when I was working on
this code over a year ago on github
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
i386 is the only current FreeBSD architecture that ever used a.out
format.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4687
The existing implementations of POSIX tsearch() and tdelete() don't
attempt to perform any balancing at all. Testing reveals that inserting
100k nodes into a tree sequentially takes approximately one minute on my
system.
Though most other BSDs also don't use any balanced tree internally, C
libraries like glibc and musl do provide better implementations. glibc
uses a red-black tree and musl uses an AVL tree.
Red-black trees have the advantage over AVL trees that they only require
O(1) rotations after insertion and deletion, but have the disadvantage
that the tree has a maximum depth of 2*log2(n) instead of 1.44*log2(n).
My take is that it's better to focus on having a lower maximum depth,
for the reason that in the case of tsearch() the invocation of the
comparator likely dominates the running time.
This change replaces the tsearch() and tdelete() functions by versions
that create an AVL tree. Compared to musl's implementation, this version
is different in two different ways:
- We don't keep track of heights; just balances. This is sufficient.
This has the advantage that it reduces the number of nodes that are
being accessed. Storing heights requires us to also access all of the
siblings along the path.
- Don't use any recursion at all. We know that the tree cannot 2^64
elements in size, so the height of the tree can never be larger than
96. Use a 128-bit bitmask to keep track of the path that is computed.
This allows us to iterate over the same path twice, meaning we can
apply rotations from top to bottom.
Inserting 100k nodes into a tree now only takes 0.015 seconds. Insertion
seems to be twice as fast as glibc, whereas deletion has about the same
performance. Unlike glibc, it uses a fixed amount of memory.
I also experimented with both recursive and iterative bottom-up
implementations of the same algorithm. This iterative top-down version
performs similar to the recursive bottom-up version in terms of speed
and code size.
For some reason, the iterative bottom-up algorithm was actually 30%
faster for deletion, but has a quadratic memory complexity to keep track
of all the parent pointers.
Reviewed by: jilles
Obtained from: https://github.com/NuxiNL/cloudlibc
Differential Revision: https://reviews.freebsd.org/D4412
Depending on system configuration and parameters, clock_gettime() and
gettimeofday() may not be system calls. If so, passing an invalid pointer
will cause a signal and not an [EFAULT] error.
From a standards perspective, this is OK since passing an invalid pointer is
undefined behaviour.
MFC after: 1 week
lib/libc/tests/nss
- Convert the testcases to ATF
- Do some style(9) cleanups:
-- Sort headers
-- Apply indentation fixes
-- Remove superfluous parentheses
- Explicitly print out debug printfs for use with `kyua {debug,report}`; for
items that were overly noisy, they've been put behind #ifdef DEBUG
conditionals
- Fix some format strings
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
