This is the same as vm_page_alloc_noobj(), but allocates physically
contiguous runs of memory. For now it is implemented in terms of
vm_page_alloc_contig(), with the difference that
vm_page_alloc_noobj_contig() implements VM_ALLOC_ZERO by zeroing the
page.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32005
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
The diff adds vm_page_alloc_noobj() and vm_page_alloc_noobj_domain().
These mostly correspond to vm_page_alloc() and vm_page_alloc_domain()
when no VM object is specified, with the exception that they handle
VM_ALLOC_ZERO by zeroing the page, rather than by preserving PG_ZERO.
This simplifies callers and will permit simplification of the
vm_page_alloc_domain() definition.
Since the new allocator variant is similar to vm_page_alloc_freelist(),
implement both of them using a common backend allocator function. No
functional change intended.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31985
When iterating over the process group members, skip zombies same as it
is done by pfind() for single-process operation.
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32513
for state control over TRACE, TRAPCAP, ASLR, PROTMAX, STACKGAP,
NO_NEWPRIVS, and WXMAP.
Reported by: emaste
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32513
and remove zeroing of it from specific functions. This way it is
guaranteed that we do not leak kernel data.
Suggested by: markj
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32513
net_open() does replace f_devdata with pointer to netdev_sock,
this will cause memory leak when device is closed, but also does
alter the devopen() logic.
We should store &netdev_sock to dev->d_opendata instead, this
would preserve and follow the devopen() logic.
Fixes network boot on aarch64 (tested by bz).
Reviewed-by: imp
MFC After: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32227
Bell is either useless if you're working on remote servers or really annoying
when you're working with a local machine that have a loud buzzer.
Switch the default to have it disable.
Reviewed by: imp, pstef, tsoome
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32543
Remove code duplication by moving code responsible for partial block
zeroing to a separate function: dnode_partial_zero().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#12627
As lorder is not used by the base system build there is no need to
include it in bootstrap-tools or NXBDIRS.
Fixes: 0e1e341b48 ("Stop using lorder and ranlib when...")
Sponsored by: The FreeBSD Foundation
Without this patch, if a NFSv4.1/4.2 server replies NFSERR_DELAY to
a Close operation, the client loops retrying the Close while holding
a shared lock on the clientID. This shared lock blocks returns of
delegations, even though the server has issued a CB_RECALL to request
the delegation return.
This patch delays doing a retry of a Close that received a reply of
NFSERR_DELAY until after the shared lock on the clientID is released,
for NFSv4.1/4.2. To fix this for NFSv4.0 would be very difficult and
since the only known NFSv4 server to reply NFSERR_DELAY to Close only
does NFSv4.1/4.2, this fix is hoped to be sufficient.
This problem was detected during a recent IETF working group NFSv4
testing event.
MFC after: 2 week
Reset both pagepool_start and pagepool_end after a mmap(2) failure,
to avoid using invalid pagepool either for allocation or munmap(2).
PR: 259076
Noted by: Denis Koreshkov <dynamic-wind@mail.ru>
Reviewed by: arichardson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32514
Previously they were skipped. lorder(1) serves no functional purpose
today but we might as well address this longstanding bug while it is
still in the tree.
PR: 133860
MFC after: 1 week
Submitted by: John Hein
Summary:
This adds required IPQ4018/IPQ4019 SoC support to boot.
It also includes support for disabling the ARMv7 hardware
breakpoint / debug stuff at compile time as this is
required for the IPQ SoCs, and printing out the undefined
instruction itself.
Test Plan: * compiled/booted on an IPQ4019 SoC AP
Reviewers: #core_team!
Subscribers: imp, andrew
Differential Revision: https://reviews.freebsd.org/D32538
This is for the Qualcomm Atheros quad-core ARMv7 SoC with built-in
2x2 2GHz and 5GHz ath10k devices.
It's enough (with an upcoming set of config files) to netboot
on an ASUS router I have here and get to a single core mountroot
prompt.
The upcoming QCA ipq401x support detects the CP14 debug features,
but any attempt to use it causes an undefined instruction error.
It apparently needs a specific TZ image loaded by the early bootloader
(SBL) in order to enable these kinds of features.
So add a new kernel option that explicitly disables this in the
arm code - the debugger works fine without it.
These are hardware configuration options which are required in
the linux/openwrt device trees for the IPQ4018/IPQ4019 devices.
Since this isn't obtained from linux upstream but instead from
openwrt, this can't go in contrib; instead it is going in
sys/dts/include/ .
Obtained from: OpenWRT
Tested:
* IPQ4019 ASUS RT-AC58U AP, initial bootstrapping
This function was originally carved out of in6_pcbbind(), which
is in in6_pcb.c. This function also uses KPI private to the PCB
database - in_pcb_lport().
Add necessary bits to detect ELF format on Linux/aarch64; note that
Linux calls it aarch64 where we would typically call it arm64 (uname -m)
Reviewed by: arichardson, emaste, imp
Sponsored by: Ampere Computing LLC
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D32542
Link against the ssh-sk-helper client rather than the sk internal
implementation.
PR: 258384
Tested by: madpilot
Fixes: f448c3ed4a ("openssh: Add new source files to libssl")
Fixes: 19261079b7 ("openssh: update to OpenSSH v8.7p1")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32529
Note, this breaks compatibility with snapshots generated by older builds
of bhyve(8).
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: grehan, bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32523
Timecounter registration is dynamic, i.e., there is no requirement that
timecounters must be registered during single-threaded boot. Loadable
drivers may in principle register timecounters (which can be switched to
automatically). Timecounters cannot be unregistered, though this could
be implemented.
Registered timecounters belong to a global linked list. Add a mutex to
synchronize insertions and the traversals done by (mpsafe) sysctl
handlers. No functional change intended.
Reviewed by: imp, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32511
Add a SIG_FOREACH macro that can be used to iterate over a signal set.
This is a bit cleaner and more efficient than calling sig_ffs() in a
loop. The implementation is based on BIT_FOREACH_ISSET(), except
that the bitset limbs are always 32 bits wide, and signal sets are
1-indexed rather than 0-indexed like bitset(9) sets.
issignal() cannot really be modified to use SIG_FOREACH() directly.
Take this opportunity to split the function into two explicit loops.
I've always found this function hard to read and think that this change
is an improvement.
Remove sig_ffs(), nothing uses it now.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32473
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
This is a re-application of commit
9068f6ea69.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
Eliminate the nested loops and re-implement following a suggestion from
rlibby.
Add some simple regression tests.
Reviewed by: rlibby, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32472
