Commit Graph

46 Commits

Author SHA1 Message Date
Benno Rice
bdfe5c9146 - Use cpu_setup() instead of identifycpu().
- Remove identifycpu().
2003-02-05 12:10:46 +00:00
Benno Rice
8bc7bc1ea0 - Rename the "powerpc" timecounter to the "decrementer" timecounter.
- Initialise it earlier.
2003-02-05 11:16:36 +00:00
Peter Grehan
d2e30522fe Sync the i-cache after copying down the interrupt code
Approved by:  benno
2003-01-08 12:27:47 +00:00
Daniel Eischen
2be05b70c9 Add getcontext, setcontext, and swapcontext as system calls.
Previously these were libc functions but were requested to
be made into system calls for atomicity and to coalesce what
might be two entrances into the kernel (signal mask setting
and floating point trap) into one.

A few style nits and comments from bde are also included.

Tested on alpha by: gallatin
2002-11-16 06:35:53 +00:00
Dag-Erling Smørgrav
97b67f3141 Print real / avail memory in megabytes rather than kilobytes. 2002-11-09 16:19:14 +00:00
Thomas Moestl
0fca57b8b8 Move the definitions of the hw.physmem, hw.usermem and hw.availpages
sysctls to MI code; this reduces code duplication and makes all of them
available on sparc64, and the latter two on powerpc.
The semantics by the i386 and pc98 hw.availpages is slightly changed:
previously, holes between ranges of available pages would be included,
while they are excluded now. The new behaviour should be more correct
and brings i386 in line with the other architectures.

Move physmem to vm/vm_init.c, where this variable is used in MI code.
2002-11-07 23:57:17 +00:00
Juli Mallett
751d91aabd Remove what was a temporary bogus assignment of bits of siginfo_t, as it does
not look like the prerequisites to fill it in properly will be in the tree
for the upcoming release, but it's mostly done, so there is no need for these
to stay around to remind us.
2002-11-06 14:53:35 +00:00
Peter Wemm
23eeeff7be Split 4.x and 5.x signal handling so that we can keep 4.x signal
handling clean and functional as 5.x evolves.  This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.

Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43.  Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too.  Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.

Tested on: i386, alpha, ia64.  Compiled on sparc64 (a few days ago).
Approved by: re
2002-10-25 19:10:58 +00:00
Peter Grehan
81a6d01d1c - implemented sendsig/sigreturn
- sysctl for cacheline size, required by libc/rtld
 - init'd more exception vectors
 - fixed problem with register overwrite in exec_setregs
 - removed redundant NetBSD code

Approved by: benno
2002-09-19 04:30:43 +00:00
Julian Elischer
4f0db5e08c Allocate KSEs and KSEGRPs separatly and remove them from the proc structure.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)

While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
2002-09-15 23:52:25 +00:00
Peter Wemm
31cdffc6d8 Take a shot at fixing up a whole stack of style and other embarresing
unforced errors that Bruce identified.  I have not yet addressed all of
his concerns.
2002-08-31 03:33:32 +00:00
Peter Wemm
447b3772dc Change hw.physmem and hw.usermem to unsigned long like they used to be
in the original hardwired sysctl implementation.

The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int.  Use
'long' there.

Change Maxmem and physmem and related variables to 'long', mostly for
completeness.  Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody.  This
comes for free on 32 bit machines, so why not?
2002-08-30 04:04:37 +00:00
Jake Burkholder
bafbd49201 Renamed poorly named setregs to exec_setregs. Moved its prototype to
imgact.h with the other exec support functions.
2002-08-29 06:17:48 +00:00
Benno Rice
45b4eca56d Add DDB support. 2002-07-10 12:21:54 +00:00
Benno Rice
c3e9df1087 - Make sure we don't trample our metadata pointer in our initial bootstrap.
- Load metadata parameters.
2002-07-10 12:16:48 +00:00
Benno Rice
87054a7182 Tidy up trap vector and external interrupt setup. 2002-07-09 13:40:37 +00:00
Benno Rice
37d87c9ff8 Move the kcopy() function from trap.c to machdep.c. Add a prototype. 2002-05-28 07:36:36 +00:00
Benno Rice
eeaa897915 FPU support.
Obtained from:	NetBSD (portions)
2002-05-13 07:44:48 +00:00
Benno Rice
e89482f7cb Install the system call trap handler. 2002-05-10 14:19:44 +00:00
Poul-Henning Kamp
2ce7d7a033 GC various bits and pieces of USERCONFIG from all over the place. 2002-04-09 11:18:46 +00:00
Poul-Henning Kamp
67ec58a802 GC the "dumplo" variable, which is no longer used.
A lot of sys/*/*/machdep.c seems not to be.
2002-04-07 21:01:37 +00:00
John Baldwin
c53c013bae - Move the MI mutexes sched_lock and Giant from being declared in the
various machdep.c's to being declared in kern_mutex.c.
- Add a new function mutex_init() used to perform early initialization
  needed for mutexes such as setting up thread0's contested lock list
  and initializing MI mutexes.  Change the various MD startup routines
  to call this function instead of duplicating all the code themselves.

Tested on:	alpha, i386
2002-04-02 22:19:16 +00:00
Jeff Roberson
f22a4b62f5 Add a new mtx_init option "MTX_DUPOK" which allows duplicate acquires of locks
with this flag.  Remove the dup_list and dup_ok code from subr_witness.  Now
we just check for the flag instead of doing string compares.

Also, switch the process lock, process group lock, and uma per cpu locks over
to this interface.  The original mechanism did not work well for uma because
per cpu lock names are unique to each zone.

Approved by:	jhb
2002-03-27 09:23:41 +00:00
Benno Rice
db9e94f707 Install the DSI and ISI trap handlers and their appropriate locations. 2002-03-07 12:22:44 +00:00
Benno Rice
9164438ed2 Move tunable initialisation so it can get access to physmem. 2002-03-07 10:15:17 +00:00
Benno Rice
b7ac845009 - Rearrange the sequence of events in powerpc_init() somewhat.
- Catch another instance of PSL_EE being cleared without PSL_RI.
2002-02-28 03:15:49 +00:00
Benno Rice
5244eac968 Complete rework of the PowerPC pmap and a number of other bits in the early
boot sequence.

The new pmap.c is based on NetBSD's newer pmap.c (for the mpc6xx processors)
which is 70% faster than the older code that the original pmap.c was based
on.  It has also been based on the framework established by jake's initial
sparc64 pmap.c.

There is no change to how far the kernel gets (it makes it to the mountroot
prompt in psim) but the new pmap code is a lot cleaner.

Obtained from:	NetBSD (pmap code)
2002-02-14 01:39:11 +00:00
Julian Elischer
079b7badea Pre-KSE/M3 commit.
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.

Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
2002-02-07 20:58:47 +00:00
Bruce Evans
55a9536b65 Compile osigreturn() unconditionally since it will always be needed on
some arches and the syscall table is machine-independent.  It was
(bogusly) conditional on COMPAT_43, so this usually makes no difference.

ia64: in addition:
- replace the bogus cloned comment before osigreturn() by a correct one.
  osigreturn() is just a stub fo ia64's.
- fix the formatting of cloned comment before sigreturn().
- fix the return code.  use nosys() instead of returning ENOSYS to get
  the same semantics as if the syscall is not in the syscall table.
  Generating SIGSYS is actually correct here.
- fix style bugs.

powerpc: copy the cleaned up ia64 stub.  This mainly fixes a bogus comment.

sparc64: copy the cleaned up the ia64 stub, since there was no stub before.
2002-02-01 15:44:03 +00:00
Andrew Gallatin
350cb38b1f Simple fixes to get the powerpc kernel compiling again.
Reviewed by:	mp
2002-01-28 14:07:36 +00:00
John Baldwin
0bbc882680 Overhaul the per-CPU support a bit:
- The MI portions of struct globaldata have been consolidated into a MI
  struct pcpu.  The MD per-CPU data are specified via a macro defined in
  machine/pcpu.h.  A macro was chosen over a struct mdpcpu so that the
  interface would be cleaner (PCPU_GET(my_md_field) vs.
  PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead.  In a UP kernel,
  this data was stored as global variables which is where the original name
  came from.  In an SMP world this data is per-CPU and ideally private to each
  CPU outside of the context of debuggers.  This also included combining
  machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
  npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
  fields.
- The globaldata_register() function was renamed to pcpu_init() and now
  init's MI fields of a struct pcpu in addition to registering it with
  the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
  internal array and list.

Tested on:	alpha, i386
Reviewed by:	peter, jake
2001-12-11 23:33:44 +00:00
Matthew Dillon
66a11b9fb1 Allow maxusers to be specified as 0 in the kernel config, which will
cause the system to auto-size to between 32 and 512 depending on the
amount of memory.

MFC after:	1 week
2001-12-09 01:57:09 +00:00
Mark Peek
e398651c46 Don't enable FP in the kernel. It is not needed when -msoft-float is used.
Reminded by:	benno
2001-11-13 00:44:21 +00:00
Mark Peek
8f718dfdc3 Add enable_fpu/save_fpu for handling the floating point registers in the PCB.
Obtained from:	NetBSD
2001-11-05 00:45:33 +00:00
Dag-Erling Smørgrav
1f04261973 [partially forced commit due to pilot error in earlier commit attempt]
{set,fill}_{,fp,db}regs() fixup:

 - Add dummy {set,fill}_dbregs() on architectures that don't have them.

 - KSEfy the powerpc versions (struct proc -> struct thread).

 - Some architectures had the prototypes in md_var.h, some in reg.h, and
   some in both; for consistency, move them to reg.h on all platforms.

These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.

Run-tested on i386, build-tested on Alpha, untested on other platforms.
2001-10-21 22:16:48 +00:00
Mark Peek
94e0b85e76 Fix includes based on recent changes to lock.h, mutex.h and ktr.h. 2001-10-19 22:45:46 +00:00
Mark Peek
f57f841372 Modify a virtual address check to allow use of the openfirmware callback
used by the PowerPC simulator (PSIM).
2001-10-12 19:55:04 +00:00
Mark Peek
351bd3334f Add a call to init_param() to initialize some necessary variables. 2001-10-08 00:44:21 +00:00
Mark Peek
6e5e7555b3 Catch up to recent removal of curpcb from globals.h. 2001-09-24 02:58:49 +00:00
Mark Peek
5fd2c51edb Update PowerPC MD code to compile and do initial bootstrap based on
recent changes (KSE and VM requiring physmem to be setup).

Reviewed by:	benno, jhb, julian
2001-09-20 00:47:17 +00:00
Peter Wemm
cfbf880deb Zap #if 0'ed map init code that got moved to the MI area.
Convert the powerpc tree to use the common code.
2001-09-04 08:42:35 +00:00
Peter Wemm
e8ebc08f80 Make COMPAT_43 optional again. XXX we need COMPAT_FBSD3 etc for this
stuff.
2001-08-21 02:32:59 +00:00
Peter Wemm
2aca0c28d3 Zap 'ptrace(PT_READ_U, ...)' and 'ptrace(PT_WRITE_U, ...)' since they
are a really nasty interface that should have been killed long ago
when 'ptrace(PT_[SG]ETREGS' etc came along.  The entity that they
operate on (struct user) will not be around much longer since it
is part-per-process and part-per-thread in a post-KSE world.

gdb does not actually use this except for the obscure 'info udot'
command which does a hexdump of as much of the child's 'struct user'
as it can get.  It carries its own #defines so it doesn't break
compiles.
2001-08-08 05:25:15 +00:00
Benno Rice
111c77dcef Fix comment breakage. 2001-06-27 12:20:48 +00:00
Benno Rice
5fa25b1b0e More verbose version of identifycpu() which also contains many more CPU
versions/revisions.

Modified from the original patch to mark G3 and G4 processors as such.

Submitted by:	Jeff Schottmiller <jeff@neoscale.com>
2001-06-19 13:27:33 +00:00
Benno Rice
f9bac91b18 Bring in NetBSD code used in the PowerPC port.
Reviewed by:	obrien, dfr
Obtained from:	NetBSD
2001-06-10 02:39:37 +00:00