The BIOS method of booting imposes an absolute limit of 640k for the
size of the program being run due to btx. In practice, this means that
programs larger than about 500kiB will fail in odd ways as the stack /
heap will overflow.
Pick 510,000 as the cutoff line semi-arbitrarily. loader_lua is now
almost too big and we want to break the build when it crosses this
threshold. In my experience, below 500,000 always works, above 520,000
always seems to fail with things getting bad somewhere between 512,000
to 515,000. 510,000 is as close to the line as I think we can go, though
experience may dictate we need to lower this in the future.
This is at-best a stop-breakage until we have a better way to subset the
boot loader for BIOS booting to allow better, more fined-tuned
/boot/loaders for the many different environments they have to run
in. This likely means we'll have a graphical loader than understands a
few filesystmes for installation, and a non-graphical loader that
understands the most filesystems possible for everything else in the
future. Our build infrastructure needs some work before we can do that,
however.
At this late date, it likely isn't worth the efforts to move parts of
the loader into high memory. There's a number of assumptions about where
the stack is, where buffers reside, etc that are fulfilled when it lives
in the first 640k that would need bounce buffers and/or other counter
measures if we were to split it up. All BIOS calls are done in 16-bit
mode with SEG:OFF addresses, requiring them to be in the first 640k of
RAM. And nearly all machines in the last decade can boot with UEFI
(though there's some exceptions, so it isn't worth killing outright
yet).
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D36129
The first level boot blocks have understood how to load ELF code since
1999. Switch /boot/loader and /boot/pxeldr over to being ELF format so
that in-tree tools can examine them more closely. In addition, one
could, in theory, now have a 'lo-mem' and a 'hi-mem' segment (though a
lot of work would need to be done with bounce buffers, btx, code segment
marking, etc for an arrangement like that to work).
As far as I can tell, this is the last a.out binary in the tree. There
are several raw binaries left, but everything else is ELF.
Reviewed by: emaste, kevans
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36130
geliboot.c and geliboot_crypto.c don't need anything from stand/common,
so remove them from the list of things to add it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35921
bootstrap.h isn't needed at all by geil, so remove it.
Sponsored by: Netflix
Reviewed by: tsoome (earlier version)
Differential Revision: https://reviews.freebsd.org/D35920
This code was written prior to snprintf being in the then libstand (now
libsa). Since we have it, use it for extra safety. The code already
tries to be safe, but since we have snprintf as well, the added layer of
protection will suffice. The current code reserves 16 bytes (plus a NUL)
at the end for worst case of inet_ntoa, which is still a little
pessimal, but safe from overflow.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35102
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation
Add a shortcut for invokging ${SRCTOP}/tools/boot/universe.sh by
creating a 'universe' target in src/stand. This will make it easier to
test out all the different combinations of boot loaders that we build.
Sponsored by: Netflix
Since both EFI and the future kboot will benefit from a 'quit' command,
move it from efi/loader/main.c to common/commands.c. In EFI this command
exits back to the boot loader (which will cause the next BootXXXX in the
BootOrder list to be attempted). In kboot, this will exit back to
whatever called loader.kboot. In uboot this will cause a reset (which
will restart uboot, not quite a simple exit, but will look similar)
and in OFW it will execute OF_exit which should return to the
openfirmware prompt.
Sponsored by: Netflix
This is similar to 5d48fb3b16.
With LLVM14 the .data.rel.ro ELF section appears after .data,
making loader behave erractly and kernel is not loaded.
This patch makes ensures the correct order.
Based on discussion at:
https://github.com/llvm/llvm-project/issues/56306
MFC after: 1 day
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Put the console into raw mode on startup. This allows the menus to work
as expected. Boot is now interruptable.
Note: Likely should restore the terminal settings on most exists. It's
not clear the best way to do this, and most shells have an auto stty
sane anyway, so note it for future improvement.
Sponsored by: Netflix
Implement a stripped down termios, obtained from various files in musl
and HOST_ or host_ prepended to most things and a few unavoidable style
tweaks. Only implements the bits of termios we need for the boot loader:
put the terminal into raw mode, restore terminal settings and speed
stuff.
Sponsored by: Netflix
Clients of libsa are expected to implement exit(). The current exit just
loops forever. It is better to really exit: when running as init that
will reboot the system. When not running as init, other programs can
recover (not that we support running as init, but when we do in the
future, this is still the rigtht thing).
Sponsored by: Netflix
Add support for aarch64. exec.c and ldscript are copied from the EFI
version with #ifdefs for the differences. Once complete, I'll refactor
them. host_syscall.S implements a generic system call. tramp.S is a
first attempt to create a tramoline that we can use to jump to the
aarch64 kernel. Add aarch64-specific startup and stat files as well.
exec.c tweaked slightly to avoid bringing in bi_load(), which will come
in later. Includes tweaks to stat due to name differences between names
on different Linux architectures.
Sponsored by: Netflix
conf.c is the same now between powerpc64 and amd64, so move it up to
kboot. Move powerpc file formats defines to ppc64_elf_freebsd.c
Sponsored by: Netflix
This was copied from powerpc/ofw and has never been used. We also don't
care about -DAIM. It's only relevant for in-kernel structures, which we
don't use in this userland program.
Sponsored by: Netflix
Linux 2.4 introduced getdents64. Switch to using it because aarch64
doesn't have getdents as that syscall was obsoleted before that port was
created.
Sponsored by: Netflix
tftp.c includes bootinfo.h, but doesn't need it. Remove it, and remove
the -Istand/common from CFALGS since that's the only reason we had it.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35928
dv_cleanup is specified almost everywhere. Use nullsys instead of NULL
to indicate 'do nothing'. Also, be consistent in trailing commas that
were missing before.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35913
While in theory, once upon a time, dv_type was arch specific, that's
never been the case in FreeBSD (and certaintly isn't in the surviving
drivers). Remove that notation.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35911
Rather than hard coding 8 for the device name length, create a #define for it.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35910
Fix a typo by reworking the comment for blake3_impl_hack.c and amplify
the nature of the hack and its temporary reason for existing.
Sponsored by: Netflix
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D35895
Now that the minor issues preventing zfs.c from using CFLAGS_EARLY have
been fixed, use that mechanism like everything else that needs the
OpenZFS spl headers. This simplifies things somewhat. Update comments to
document why zfs.c is still special, though in different ways.
Note: We also use the fact that NEED_SOLARIS_BOOLEAN is only defined in
an environment where the solaris compat boolean stuff will be defined
prior to this point (eg, when we're building zfs.c in libsa), but not in
other environments (like when we're building mkimage and stand-alone
boot loaders that don't use libsa). These latter uses should be changed
to use the same ZFS compile env, but aren't as part of this commit.
This has to be done in the same change as the ZFS_EARLY change to not
break zfs.c building for one commit affecting bisectabiltiy.
Sponsored by: Netflix
Reviewed by: tsoome, delphij
Differential Revision: https://reviews.freebsd.org/D35894
Constrain CFLAGS for ZFS: don't add anything globally. Add the includes
to only the files that need them. Add -DHAS_ZSTD_ZFS to zfs.c (which
includes zfsimpl.c which includes zfssubr.c both of which need this
defined). Also add it to efi/boot1/Makefile since zfs_module.c also
includes zfsimple.c.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35887
Various GELI sources need bootstrap.h and disk.h. In theory they
shouldn't need anything outside of libsa, but disk.h and bootstrap.h are
currently required.
This fixes the build with MK_LOADER_ZFS=no.
Obtained from: CheriBSD
Fixes: eaf7aabddc stand: geli CFLAGS tightening
Sponsored by: DARPA
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35861
In theory they shouldn't need anything outside of libsa, but disk.h and
bootstrap.h are currently required. Future work wil address this issue.
This fixes the build with MK_LOADER_ZFS=no. ZFS's Makefile.inc adds
these flags globally to CFLAGS when it should not. This masked the
problem because the tools/boot/universe.sh didn't build MK_LOADER_ZFS=no
as part of its regressions. Future work will also fix this.
Obtained from: CheriBSD
Fixes: 84bf2bbbec stand: constrain zlib/gzip CFLAGS better
Sponsored by: DARPA
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35860
With clang 15, the following -Werror warning is produced:
stand/i386/boot2/boot2.c:358:6: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
This is because parse() is declared with a (void) argument list, and
defined with an empty argument list. Make the definition match the
declaration.
MFC after: 3 days