That commit moved key generation into a child process, including
a memory allocation referenced by a structure. The child wrote
the structure to the parent over a pipe, but did not write the
referenced allocation. The parent read the structure from the
child and used its pointer, which was bogus in the parent.
In the child, send both chunks of data to the parent. In the
parent, make a corresponding allocation and read both chunks.
Fixes: 372557d8c3
Reviewed by: bdrewery, markj
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D31452
When matching entries, we should ignore those with a name of '#'. It's
the standard way to skip elements and need to be present to have the
proper offsets to the fields that are observed. No bus has a pnp
attribute of '#' and that is now disallowed for future buses that are
written.
Sponsored by: Netflix
Reviewed by: kbowling
Differential Revision: https://reviews.freebsd.org/D31482
Felix switch found in LS1028A supports stripping VLAN tag on
ingress, instead of egress. The striptag flag excepts the latter
behaviour.
Add a new flag to support the feature.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30922
SO_RERROR indicates that receive buffer overflows should be handled as
errors. Historically receive buffer overflows have been ignored and
programs could not tell if they missed messages or messages had been
truncated because of overflows. Since programs historically do not
expect to get receive overflow errors, this behavior is not the
default.
This is really really important for programs that use route(4) to keep
in sync with the system. If we loose a message then we need to reload
the full system state, otherwise the behaviour from that point is
undefined and can lead to chasing bogus bug reports.
Reviewed by: philip (network), kbowling (transport), gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26652
This allows the use of VLAN PCP in dhclient, which is required for
certain ISPs (such as Orange.fr).
Reviewed by: bcr (man page)
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31263
Netdump has its own configuration tracking such that
ioctl(/dev/null, DIOCSKERNELDUMP) does a dumper_remove() but does not
notify netdump about the removal. Simply sending the same ioctl to
/dev/netdump handles the situation.
Reviewed by: markj, cem
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D31300
If -v is specified when adding a new device then a full listing of
configured devices is displayed. This requires sysctl access which
genkey()'s use of capability mode was blocking permission to access.
This leads to both confusing console spam but also incorrectly returning
an error status even if no other had been encountered.
dumpon: Sysctl get 'kern.shutdown.dumpdevname': Operation not permitted
Fix this by generating the key in a child process.
Reviewed by: markj
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D31266
This can be useful for, e.g., unmounting filesystems that were needed
for shutdown.
Reviewed by: kib
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #63
Differential Revision: https://reviews.freebsd.org/D31230
Support the 'match' keyword.
Note that support is limited to adding queuing information, so without
ALTQ support in the kernel setting match rules is pointless.
For the avoidance of doubt: this is NOT full support for the match
keyword as found in OpenBSD's pf. That could potentially be built on top
of this, but this commit is NOT that.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31115
Since bsd.prog.mk includes bsd.obj.mk, and thus bsd.subdir.mk, we must
ensure all our bsd.subdir.mk-affecting variables are set before
including bsd.prog.mk. Since sbin's various Makefile.arch files add to
SUBDIR this results in those not taking effect, and presumably we also
end up not having buildworld as parallel as it should be due to the fact
that SUBDIR_PARALLEL was not being set before including bsd.prog.mk.
MFC with: 0a0f748641
Reviewed by: olivier
Differential Revision: https://reviews.freebsd.org/D31125
Background checks are only allowed for mounted filesystems - don't try
to open the device for writing when performing a background check.
While here, remove a debugging printf that's commented out.
PR: 256746
Fixes: 5cc52631b3
Reviewed by: mckusick
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D30880
Commit 1e0a518d65 added a new NFS mount option "nconnect".
This patch adds information on this option to the man page.
It also adds an IMPLEMENTATION section that explains how
the default I/O size is determined and that "nfsstat -m" can
be used to find out what option settings are actually in use.
This is a content change.
Reviewed by: gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31135
The description of the power command is missing. While the synopsis is
present, there's no explanation. Add one.
Reviewed by: mav, chuck
PR: 237866
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31122
These were all incorrectly labeled as 2-clause BSD licenses by a
semi-automated process, when in fact they are 3-clause.
Discussed with: pfg, imp
MFC after: 2 weeks
Sponsored by: Axcient
Xen VMs get a simulated serial device meant for use as a console. Often
an xterm or other advanced terminal is used, so use xterm as the type.
Depending on configuration, FreeBSD on Xen for amd64 may instead use an
emulated serial port, but the virtual console may also be available.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: imp (slightly earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29873
The tty lists were already pretty similar and there hadn't been any real
need for them to remain distinct for some time. As such, merge to a
single file.
The RISC-V console is preserved. For systems where it doesn't exist, its
presence in /etc/ttys is harmless. The uncommented version of the
ttyv8/XDM line from ttys.amd64 was the one chosen.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30256
Add an option to dumpfs, `-s`, that only prints the super block information.
Reviewed by: chs, imp
Differential Revision: https://reviews.freebsd.org/D30881
As for example pfctl -ss keeps calling it, it saves a lot of overhead
from elided parsing of /etc/nsswitch.conf and /etc/protocols.
Sample result when running a pre-nvlist binary with nfs root and dumping
7 mln states:
before: 24.817u 62.993s 1:28.52 99.1%
after: 8.064u 1.117s 0:18.87 48.5%
Idea by Jim Thompson
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Building and installing architecture-specific man pages only raises a number of
problems:
* The https://www.freebsd.org/cgi/man.cgi is incomplete. As an
example, it does not show results for pae(4). The reason for this is
that the cgi interface runs on FreeBSD amd64.
* In FreeBSD amd64 some manual pages have broken X-refs. See hptrr(4)
for an example.
* Also, we have broken links in our Release Notes. This is a
consequence of the first point. See
https://www.freebsd.org/releases/13.0R/hardware/#proc-i386.
Make MAN_ARCH default to 'all' so we build all the man pages for all the
architectures. The difference in disk space is negligible. Also link
architecture-specific man pages to their own section while keeping their own
namespace.
PR: 212290
Reported by: mj@bsdops.com
Approved by: ceri@, wosch@
MFC after: 4 weeks
The previous changes that added support for the coreutils -c option
modified the output generated by passing -r to match that of the
coreutils versions. The difference is that coreutils separates the
hash from the file name by two blanks " " (or a blank followed by
an asterisk " *" with the -b option denoting).
While most scripts or users will not notice the difference, it might
be considered a violation of POLA and this commit reverts the change
for the non-sum programs. These will print a single blank " " as the
separator, as they die before the previous commit.
In order to still generate output that is identical to that of the
coreutils programs, this commit generates the " " or " *" separator
used by them for the -sum versions, depending on the presence of the
-b option.
MFC after: 3 days
The NFSv4 client now uses the highest minor version of NFSv4
by default instead of minor version 0, for NFSv4 mounts.
The "minorversion" mount option may be used to override this default.
This patch updates the man page to reflect this change. While here,
fix nfsstat(8) to be nfsstat(1).
Reviewed by: otis
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30768
The directory for the tests was missing in BSD.tests.dist, causing
build failures in "make distribute".
Li-Wen Hsu fixed this issue in commit cb194afef5, allowing me to
re-enable installation of the tests.
MFC after: 3 days
Testing with buildworld/installworld had succeeded, but it appears
that a path is not correctly set for the distribute target in the
tests directory.
Commenting out HAS_TESTS should make the build succeed again and give
time to resolve the "make distribute" issue.
The tests have been locally run to verify that the recent changes to
add a coreutils compatible -c option does not lead to any regressions.
The bsd-p-test did create files 1.out .. 8.out in the test directory.
This has been fixed and the temporary output files are now written
to the temporary directory.
MFC after: 3 days
The -c option expects a digest file in either BSD or coreutils format.
The output for matched and mismatched files is identical to that
of the coreutils version.
The review of these changes included test cases that have already
been committed for the functionality that existed before.
Another test script is added to cover the coreutils compatible
extension implemented by this patch.
This commit contains a tests/Makefile that has been cleaned up
compared to the review version, using an implicit rule to apply the
TESTBASE path at build time (and the scripts have been renamed to
have an extension of .SH instead of .sh to trigger this rule).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D30812
While the correctness of the supported hash algorithms can be tested
with the built-in self-test feature, these test cases are meant to
detect changes in the output format.
A follow-up commit will improve the compatibility with the coreutils
versions of the hash programs, and these tests should detect any
unintended side-effects of such a change on existing functionality.
Add devd event on network iface address add/remove. Can be used to
automate actions on any address change.
Reviewed by: imp@ (and minor style tweaks)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30840
Document the existing behavior, which is currently only available by
reading third party documentation or the source code itself.
PR: 254617
Submitted by: Oliver Kiddle
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30189
Boot environment datasets that contain spaces are not bootable.
When a user attempts to create a boot environment with a space, abort
the creation and print an error message.
PR: 254441
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D30194
The segfault was being hit in ckfini() (sbin/fsck_ffs/fsutil.c) while
attempting to traverse the buffer cache. The tail queue used for the
buffer cache was not initialized before dropping into gjournal_check().
Initialize the buffer cache before calling gjournal_check().
PR: 245907
Reviewed by: jhb, mckusick
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30537
