In every mpr and mps ioctl that copies kernel data to userland, validate
that the requested length does not exceed the size of the kernel's
buffer.
Note that all of these ioctls already required root access.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D38842
It's possible for muliple drives to be departing at the same time (if
the common power rail the share goes dark, for example). To understand
what's going on better, include target and handle in the messages
announcing the reset to allow matching with other corresponding events.
MFC After: 3 days
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D35092
When we can't load a request due to a shortage of chains, we complete
the command's cm. However, to avoid an assert in mp?_complete_command,
we transition its state to INQUEUE. This transition is legitimate
because this is the only error path that terminates a cm before it's
enqueued and the only other alternative would be an additional transient
state that would add complexity w/o adding value. Add a comment
explainging all this because otherwise the transition can look a bit
weird.
Sponsored by: Netflix
*_CFG_PAGE ioctl handlers in the mpr, mps, and mpt drivers allocated a
buffer of a caller-specified size, but copied to it a fixed size header.
Add checks that the size is at least the required minimum.
Note that the device nodes are owned by root:operator with 0640
permissions so the ioctls are not available to unprivileged users.
This change includes suggestions from scottl, markj and mav.
Two of the mpt cases were reported by Lucas Leong (@_wmliang_) of
Trend Micro Zero Day Initiative; scottl reported the third case in mpt.
Same issue found in mpr and mps after discussion with imp.
Reported by: Lucas Leong (@_wmliang_), Trend Micro Zero Day Initiative
Reviewed by: imp, mav
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34692
According to Broadcom, mixing 64-bit SGEs with 32-bit chain entries can
lead to IOC Fault code 0x40000d04. This fault code has been observed to
suddenly increase on certain machines when the OCA firmware images are
deployed. The hardware interprets all elements of a 64-bit SGE, even
ones marked as 32-bit. Depending on the other bits, this will just work,
but sometimes generate the above fault. Broadcom recommends this
practice, and the Linux and NetBSD drivers follow it.
Rework the chaining code to use MPI2_SGE_CHAIN64 instead of
MPI2_SGE_CHAIN32. Adjust MPS_SGC_SIZE from 8 to 12 to match the size of
the new structure. Flag the structure as being 64-bits now. Since
MPS_SGE64_SIZE and MPS_SGC_SIZE are the same now, mps_push_sge could be
simplified (after the same fashion of mpr). The different number of
cases collapse to whether or not there's room for the segments and if
not we need a chain, however these changes haven't been made yet as the
current code handles those cases properly with the new defines.
Made chain_busaddr 64-bits, even though we ask for all allocations to be
below 4GB for this tag. Use it to set both parts of the CHAIN64 address
rather than baking the 4GB assumption. Add asserts around the allocation
to detect and BUSDMA bugs in allocation.
Remove asserts and associated comment in mpi_pre_fw_download and
mpi_pre_fw_upload. The code does not, it seems, depend on this
invariant. The mpr driver has similar code, no asserts and also doesn't
depend on this.
Adjust comments to reflect the updated size.
Sponsored by: Netflix
Reviewed by: scottl, mav
Differential Revision: https://reviews.freebsd.org/D34016
There's a small race in freezing the simq when performing a diagnostic
reset. During this time, a transaction can slip through and encounter
the target id of 0. If we're still in diagnostic reset when we detect
this, return a CAM_DEVICE_NOT_THERE status. Instead, freeze the queue
and return a requeue status, similar to what we do when we're resetting
a target and a transaction get here. The race is unavoidable due to
separate locks for queue and SIM, but easy enough to detect and make
harmless.
Sponsored by: Netflix
Reviewed by: scottl, mav
Differential Revision: https://reviews.freebsd.org/D34017
The discovery callout is initialized and cancelled only, making it
write-only. Remove a state flag associated with it being pending as well
as two defines that aren't used that are associated with it. Remove
MP?SAS_SHUTDOWN flag, which is unused.
Sponsored by: Netflix
Reviewed by: ken, scottl, mav
Differential Revision: https://reviews.freebsd.org/D33925
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Port 9781c28c6d and a8837c77ef to the mps driver. Before this
change devq was frozen only if some command was sent to the target after
reset started, but release was called always. This change freezes the
devq immediately, leaving mprsas_action_scsiio() check only to cover
race condition due to different lock devq use.
This should also avoid unnecessary requeue of the commands, creating
additional log noise and confusing some broken apps. It also avoids a
'busy' requeue of I/Os failing when we're doing recovery that takes
longer than the normal busy timeout. These I/Os failing can lead to
filesystems being unmounted in the force unmount case for I/O errors.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33228
When a DMA chain can't be loaded, set the state to STATE_INQUEUE so that
the mp[rs]_complete_command can properly fail the command.
Sponsored by: Netflix
When the mpr(4) and mps(4) drivers probe a SATA device, they issue an
ATA Identify command (via mp{s,r}sas_get_sata_identify()) before the
target is fully setup in the driver. The drivers wait for completion of
the identify command, and have a 5 second timeout. If the timeout
fires, the command is marked with the SATA_ID_TIMEOUT flag so it can be
freed later.
That is where the use-after-free problem comes in. Once the ATA
Identify times out, the driver sends a target reset, and then frees any
identify commands that have timed out. But, once the target reset
completes, commands that were queued to the drive are returned to the
driver by the controller.
At that point, the driver (in mp{s,r}_intr_locked()) looks up the
command descriptor for that particular SMID, marks it CM_STATE_BUSY and
sends it on for completion handling.
The problem at this stage is that the command has already been freed,
and put on the free queue, so its state is CM_STATE_FREE. If INVARIANTS
are turned on, we get a panic as soon as this command is allocated,
because its state is no longer CM_STATE_FREE, but rather CM_STATE_BUSY.
So, the solution is to not free ATA Identify commands that get stuck
until they actually return from the controller. Hopefully this works
correctly on older firmware versions. If not, it could result in
commands hanging around indefinitely. But, the alternative is a
use-after-free panic or assertion (in the INVARIANTS case).
This also tightens up the state transitions between CM_STATE_FREE,
CM_STATE_BUSY and CM_STATE_INQUEUE, so that the state transitions happen
once, and we have assertions to make sure that commands are in the
correct state before transitioning to the next state. Also, for each
state assertion, we print out the current state of the command if it is
incorrect.
mp{s,r}.c: Add a new sysctl variable, dump_reqs_alltypes,
that controls the behavior of the dump_reqs sysctl.
If dump_reqs_alltypes is non-zero, it will dump
all commands, not just the commands that are in the
CM_STATE_INQUEUE state. (You can see the commands
that are in the queue by using mp{s,r}util debug
dumpreqs.)
Make sure that the INQUEUE -> BUSY state transition
happens in one place, the mp{s,r}_complete_command
routine.
mp{s,r}_sas.c: Make sure we print the current command type in
command state assertions.
mp{s,r}_sas_lsi.c:
Add a new completion handler,
mp{s,r}sas_ata_id_complete. This completion
handler will free data allocated for an ATA
Identify command and free the command structure.
In mp{s,r}_ata_id_timeout, do not set the command
state to CM_STATE_BUSY. The command is still in
queue in the controller. Since we were blocking
waiting for this command to complete, there was
no completion handler previously. Set the
completion handler, so that whenever the command
does come back, it will get freed properly.
Do not free ATA Identify commands that have timed
out in mp{s,r}sas_add_device(). Wait for them
to actually come back from the controller.
mp{s,r}var.h: Add a dump_reqs_alltypes variable for the new
dump_reqs_alltypes sysctl.
Make sure we print the current state for state
transition asserts.
This was tested in the Spectra Logic test bed (as described in the
review), as well Netflix's Open Connect fleet (where panics dropped from
a dozen or two a month to zero).
Reviewed by: imp@ (who is handling the commit with ken's OK)
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D25476
Allow new enclosure to replace previously existing one if there is
no completely unused table entry, same as it is done for devices.
If we can not process DPM due to corruption -- wipe it and restart
from scratch. Otherwise I don't see a way to recover persistence if
something go wrong and there is no BIOS to recover it for us.
Together this solves a problem that appeared when 9300-8i firmware
update to 16.00.10.00 somehow switched its mapping mode from Device
Persistence to Enclosure/Slot without wiping the DPM table. It made
HBA completely unusable, since overflowed and conflicting mapping
table was unable to map any of enclosures and so devices.
Also while there make some enclosure mapping errors more informative.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
The device mapping table contains sc->max_devices entries, so only
indices in [0, sc->max_devices) are valid.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27964
Previously we copied in the request into a stack-allocated structure
that could be smaller than the request size. Furthermore, we checked
the request size only after doing the copyin.
Fix this by allocating a buffer to hold the request, then copying the
buffer's contents into a command descriptor. This is a bit heavy-handed
but I expect the overhead will not be noticeable. The approach of
coping the header in first is susceptible to TOCTOU problems.
Reviewed by: imp
Reported by: maxpl0it@protonmail.com
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27963
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
SAM-3 specification introduced concept of Task Priority, that was renamed
to Command Priority in SAM-4, and supported by all modern SCSI transports.
It provides 15 levels of relative priorities: 1 - highest, 15 - lowest and
0 - default. SAT specification for SATA devices translates priorities 1-3
into NCQ high priority.
This change adds new "priority" field into empty spots of struct ccb_scsiio
and struct ccb_accept_tio of CAM and struct ctl_scsiio of CTL. Respective
support is added into iscsi(4), isp(4), mpr(4), mps(4) and ocs_fc(4) drivers
for both initiator and where applicable target roles. Minimal support was
added to CTL to receive the priority value from different frontends, pass it
between HA controllers and report in few places.
This patch does not add consumers of this functionality, so nothing should
really change yet, since the field is still set to 0 (default) on initiator
and not actively used on target. Those are to be implemented separately.
I've confirmed priority working on WD Red SATA disks connected via mpr(4)
and properly transferred to CTL target via iscsi(4), isp(4) and ocs_fc(4).
While there, added missing tag_action support to ocs_fc(4) initiator role.
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
This memset() wiped MPI2_FUNCTION_SCSI_TASK_MGMT set by mprsas_alloc_tm(),
that broke target reset on device removal, making later re-insertion into
the same slot impossible, since firmware was still waiting for the driver
to finish with the removed device.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Copy the CP, PTRIN, etc macros from freebsd32.h into a sys/abi_compat.h
and replace existing definitation with includes where required. This
eliminates duplicate code and allows Linux and FreeBSD compatability
headers to be included in the same files.
Input from: cem, jhb
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24275
192 bytes are not enough to print long commands, such as ATA COMMAND PASS
THROUGH(16), that makes debug output difficult to read.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Remove a number of workarounds for older versions of FreeBSD. FreeBSD stable/10
was branched over 6 years ago. All of these changes date from about that time or
earlier. These workarounds are extensive and get in the way of understanding
the current flow in the driver.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
commands have completed.
It's not OK to force complete any pending commands before we send the
REMOVE_DEVICE. Instead, make sure that all pending commands are complete before
sending that. By trying to second guess the firmware here, we run the risk of
completing commands twice, which leads to corruption.
This removes the forced completion of commands introduced in r218811. So it's a
partial backout of that commit, but replaces it with a more rebust
mechanism. Either these commands will complete due to the TARGET RESET, or they
will timeout and be aborted, but they will all complete.
Add assert that all commands are complete to REMOVE_DEVICE completion
routine. We attempt to assure this programatically, so we shouldn't have any
commands in the queue because we've waited for them all. Any commands that make
it into our action routine after we mark the target in removal will complete
immediately with an error.
When we're removing a target that's not a volume, advertise up the stack that
it's actually gone, as opposed to having a transient selection error we should
retry. Do this both in the action routine, and when we get a notification of an
aborted command. We don't do this for volumes because the driver tries hard not
to advertise to the OS a volume has disappeared.
Apply these changes to both mpr and mps since they are based on quite similar
designs.
Discussed with: scottl@
Differential Revision: https://reviews.freebsd.org/D23768
in the sysctl block for the driver. mpsutil/mprutil needs this so it can
know how big of a buffer to allocate when requesting the IOCFacts from the
controller. This eliminates the kernel console messages about wrong
allocation sizes.
Reported by: imp
On a MINIMAL kernel, mps.ko wouldn't load because it uses the xpt_hold_boot
symbol from CAM, but didn't have a dependency on cam(4).
(CEM: Some context: when linking loaded modules, the kernel dynamic linker
only looks for definitions in explictly marked dependency modules. Also,
the identical mpr(4) driver uses the same CAM function, but already had the
correct MODULE_DEPEND(), so no similar change is needed there.)
Submitted by: Greg V <greg AT unrelenting.technology>
Reviewed by: imp, myself
Differential Revision: https://reviews.freebsd.org/D23272
When we get a device departed message from the firmware, we send a TARGET_REST
to the device to let the firmware know we're done and as part of the recovery
process. This will abort all the commands. While the documentation says the IOC
is responsible for writing the completion message for all the commands pending
with an aborted status, we sometimes have queued commands for the target that
haven't been completed so are in the INQUEUE state. So, when we later complete
the pending CCB as aborted, these commands are freed and we hit the "state not
busy" panic.
Elsewhere where we dequeue commands, we move the state to BUSY from INQUEUE. Do
that here as well. In talking to Ken, Scott and Justin, they recommended a
series of tests to see if this is 100% safe. Those tests are ongoing, but
preliminary tests suggest this is safe as we see no duplicate completions when
we hit this case at work. We have a machine that has a dodgy powersupply which
usually doesn't apply power to a few drives, but sometimes does when the machine
is under heavy load so we get a rash of the connect / disconnect messages over
half an hour. Without this change, we'd see state not busy panic. With this
change, the drives just annoyingly come and go without affecting the rest of the
machine, but without a complete error injection test suite, it's hard to know if
all edge cases are now covered or not.
Discussed with: scottl, ken, gibbs
Eliminate the TIMEDOUT state. This state really conveyed two different
concepts: I timed out during recovery (and my command got put on the
recovery queue), and I timed out diring discovery (which doesn't).
Separate those two concepts into two flags. Use the TIMEDOUT flag to
fail requests as timed out. Use the on queue flag to remove them from
the queue.
In mps_intr_locked for MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY message
type, when completing commands, ignore the ones that are not in state
INQUEUE. They were already completed as part of the recovery
process. When we complete them twice, we wind up with entries on the
free queue that are marked as busy, trigging asserts.
Reviewed by: scottl (earlier version, just for mpr)
Differential Revision: https://reviews.freebsd.org/D20785
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.