attached.
This is caused by bpf_detachd clearing IFF_PROMISC on the interface which does
a SIOCSIFFLAGS ioctl. The problem here is that while the interface has been
stopped, IFF_UP has not been cleared so IFF_UP != IFF_DRV_RUNNING, this causes
the ioctl function to init() the interface which resets the callouts.
The destroy then completes and frees the softc but softclock will panic on a
dead callout pointer.
Ensure ifp->if_flags matches reality by clearing IFF_UP when we destroy.
Silence from: rwatson
Approved by: mlaier (mentor)
MFC after: 3 days
through locking; leave some spl references around code where there
are open questions about global variable references. Also, add
an XXX regarding locking in sysctl.
MFC after: 3 days
actually 1514, so comparing the mbuf length which includes the Ethernet header
to the interface MTU is wrong.
The check was a little over the top so just remove it.
Approved by: mlaier (mentor)
MFC after: 3 days
enhance the security of bpf(4) by further relinquishing the privilege of
the bpf(4) consumer (assuming the ioctl commands are being implemented).
Once BIOCLOCK is executed, the device becomes locked which prevents the
execution of ioctl(2) commands which can change the underly parameters of the
bpf(4) device. An example might be the setting of bpf(4) filter programs or
attaching to different network interfaces.
BIOCSETWF can be used to set write filters for outgoing packets. Currently if
a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used
as a raw socket, regardless of consumer's UID. Write filters give users the
ability to constrain which packets can be sent through the bpf(4) descriptor.
These features are currently implemented by a couple programs which came from
OpenBSD, such as the new dhclient and pflogd.
-Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify
whether a read or write filter is to be set.
-Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the
filter program on the mbuf data once we move the packet in from user-space.
-Rather than execute two uiomove operations, (one for the link header and the
other for the packet data), execute one and manually copy the linker header
into the sockaddr structure via bcopy.
-Restructure bpf_setf to compensate for write filters, as well as read.
-Adjust bpf(4) stats structures to include a bd_locked member.
It should be noted that the FreeBSD and OpenBSD implementations differ a bit in
the sense that we unconditionally enforce the lock, where OpenBSD enforces it
only if the calling credential is not root.
Idea from: OpenBSD
Reviewed by: mlaier
struct ifnet most of if_findindex() become a complex no-op. Remove it
and replace it with a corrected version of the four line for loop it
devolved to plus some error handling. This should probably be replaced
with subr_unit at some point.
Switch from checking ifaddr_byindex to ifnet_byindex when looking for
empty indexes. Since we're doing this from if_alloc/if_free, we can
only be sure that ifnet_byindex will be correct. This fixes panics when
loading the ef(4) module. The panics were caused by the fact that
if_alloc was called four time before if_attach was called and thus
ifaddr_byindex was not set and the same unit was allocated again. This
in turn caused the first if_attach to fail because the ifp was not the
one in ifnet_byindex(ifp->if_index).
Reported by: "Wojciech A. Koszek" <dunstan at freebsd dot czest dot pl>
PR: kern/84987
MFC After: 1 day
- Add a note that additions should be made to if_free_type and not
if_free to help avoid this in the future.
This apparently fixes a use after free in if_bridge and may fix bugs
in other direct if_free_type consumers.
Reported by: thompsa
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
- rt0 passed to rt_check() must not be NULL, assert this.
- rt returned by rt_check() must be valid locked rtentry,
if no error occured.
o Modify callers, so that they never pass NULL rt0
to rt_check().
Reviewed by: sam, ume (nd6.c)
device driver, owned by the network stack, or initialized by the device
driver before attach and read-only from then on.
Not all device drivers and network stack components currently follow
these rules, especially with respect to IFF_UP, and a few exceptions
with IFF_ALLMULTI.
MFC after: 7 days
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
and move both flags from ifnet.if_flags to ifnet.if_drv_flags, making
and documenting the locking of these flags the responsibility of the
device driver, not the network stack. The flags for these two fields
will be mutually exclusive so that they can be exposed to user space as
though they were stored in the same variable.
Provide #defines to provide the old names #ifndef _KERNEL, so that user
applications (such as ifconfig) can use the old flag names. Using the
old names in a device driver will result in a compile error in order to
help device driver writers adopt the new model.
When exposing the interface flags to user space, via interface ioctls
or routing sockets, or the two fields together. Since the driver flags
cannot currently be set for user space, no new logic is currently
required to handle this case.
Add some assertions that general purpose network stack routines, such
as if_setflags(), are not improperly used on driver-owned flags.
With this change, a large number of very minor network stack races are
closed, subject to correct device driver locking. Most were likely
never triggered.
Driver sweep to follow; many thanks to pjd and bz for the line-by-line
review they gave this patch.
Reviewed by: pjd, bz
MFC after: 7 days
m_copym(m, 0, M_COPYALL, how).
This is required for strict alignment architectures where we align the IP
header in the input path but m_copym() will create an unaligned copy in
bridge_broadcast(). m_copypacket() preserves alignment of the first mbuf.
Noticed by: Petri Simolin
Approved by: mlaier (mentor)
MFC after: 3 days
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do. This avoids having multiple event handler types and
fall-back/precedence logic in devfs.
This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.
Requested by: phk
MFC after: 3 days
if_attach(). This allows ethernet drivers to use it in their routines
to program their MAC filters before ether_ifattach() is called (de(4) is
one such driver). Also, the if_addr mutex is destroyed in if_free()
rather than if_detach(), so there was another potential bug in that a
driver that failed during attach and called if_free() without having
called ether_ifattach() would have tried to destroy an uninitialized mutex.
Reported by: Holm Tiffe holm at freibergnet dot de
Discussed with: rwatson
using ifp->if_addr_mtx:
- Initialize if_addr_mtx when ifnet is initialized.
- Destroy if_addr_mtx when ifnet is torn down.
- Rename ifmaof_ifpforaddr() to if_findmulti(); assert if_addr_mtx.
Staticize.
- Extract ifmultiaddr allocation and initialization into if_allocmulti();
accept a 'mflags' argument to indicate whether or not sleeping is
permitted. This centralizes error handling and address duplication.
- Extract ifmultiaddr tear-down and deallocation in if_freemulti().
- Re-structure if_addmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Make use of non-sleeping allocations. Annotate the fact that we only
generate routing socket events for explicit address addition, not
implicit link layer address addition.
- Re-structure if_delmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Annotate the lack of a routing socket event for implicit link layer
address removal.
- De-spl all and sundry.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
ifp->if_resolvemulti(), do so with M_NOWAIT rather than M_WAITOK, so
that a mutex can be held over the call. In the FDDI code, add a
missing M_ZERO. Consumers are already aware that if_resolvemulti()
can fail.
MFC after: 1 week
lists. Add accessor macros.
This changes the size of struct ifnet, but ideally, all ifnet consumers
are now using if_alloc() to allocate these structures rather than
embedding them into device driver softc's, so this won't modify the
network device driver ABI.
MFC after: 1 week
FreeBSD specific ip_newid() changes NetBSD does not have.
Correct handling of non AF_INET packets passed to bpf [2].
PR: kern/80340[1], NetBSD PRs 29150[1], 30844[2]
Obtained from: NetBSD ip_gre.c rev. 1.34,1.35, if_gre.c rev. 1.56
Submitted by: Gert Doering <gert at greenie.muc.de>[2]
MFC after: 4 days
temporary buffer then pass the array to user-space once we have
dropped the lock.
While we are here, drop an assertion which could result in a
kernel panic under certain race conditions.
Pointed out by: rwatson
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME
bridge but the interface can still be changed afterwards.
This falls under the 'dont do that' category but log an warning when INVARIANTS
is defined.
Approved by: mlaier (mentor)
MFC after: 3 days
be used to pass statistics regarding dropped, matched and received
packet counts from the kernel to user-space. While we are here
introduce a new counter for filtered or matched packets. We currently
keep track of packets received or dropped by the bpf device, but not
how many packets actually matched the bpf filter.
-Introduce net.bpf.stats sysctl OID
-Move sysctl variables after the function prototypes so we can
reference bpf_stats_sysctl(9) without build errors.
-Introduce bpf descriptor counter which is used mainly for sizing
of the xbpf_d array.
-Introduce a xbpf_d structure which will act as an external
representation of the bpf_d structure.
-Add a the following members to the bpfd structure:
bd_fcount - Number of packets which matched bpf filter
bd_pid - PID which opened the bpf device
bd_pcomm - Process name which opened the device.
It should be noted that it's possible that the process which opened
the device could be long gone at the time of stats collection. An
example might be a process that opens the bpf device forks then exits
leaving the child process with the bpf fd.
Reviewed by: mdodd
which in the future will hold IFF_OACTIVE and IFF_RUNNING, and have
its access synchronized by the device driver rather than the
protocol stack. This will avoid potential races in the management
of flags in if_flags.
Discussed with: various (scottl, jhb, ...)
MFC after: 1 week
Compare pointers with NULL rather than treating them as booleans.
Compare pointers with NULL rather than 0 to make it more clear
they are pointers.
Assign pointers value of NULL rather than 0 to make it more clear
they are pointers.
MFC after: 3 days
- Introduce a subsystem mutex, natm_mtx, manipulated with accessor macros
NATM_LOCK_INIT(), NATM_LOCK(), NATM_UNLOCK(), NATM_LOCK_ASSERT(). It
protects the consistency of pcb-related data structures. Finer grained
locking is possible, but should be done in the context of specific
measurements (as very little work is done in netnatm -- most is in the
ATM device driver or socket layer, so there's probably not much
contention).
- Remove GIANT_REQUIRED, mark as NETISR_MPSAFE, remove
NET_NEEDS_GIANT("netnatm").
- Conditionally acquire Giant when entering network interfaces for
ifp->if_ioctl() using IFF_LOCKGIANT(ifp)/IFF_UNLOCKGIANT(ifp) in order
to coexist with non-MPSAFE atm ifnet drivers..
- De-spl.
MFC after: 2 weeks
Reviewed by: harti, bms (various versions)
the case of an RTM_CHANGE was specific, i.e. that it matched completely. This
led to a route change of a non-existent route changing the default route
as the radix code would simply back track to that point and hand that
route back to the routing socket code.
PR: 82974
Reviewed by: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw>
Ben Kaduk <minimarmot@gmail.com>
Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net>
Obtained from: OpenBSD with modifications.
MFC after: 2 weeks
Some of the (IPv6) cleanup functions send packets to inform peers of the
departure. These packets confused users of ifnet_departure_event (pf at the
moment).
PR: kern/80627
Tested by: Divacky Roman
MFC after: 1 week
- Introduce a helper function if_setflag() containing the code common
to ifpromisc() and if_allmulti() instead of duplicating the code poorly,
with different bugs.
- Call ifp->if_ioctl() in a consistent way: always use more compatible C
syntax and check whether ifp->if_ioctl is not NULL prior to the call.
MFC after: 1 month
we can only bridge interfaces with the same value it meant that all members had
to be set at ETHERMTU as well.
Allow the first member to be added to define the MTU for the bridge, the check
still applies to all additional members.
Print an informative message if the MTU is incorrect [1]
Requested by: Niki Denev [1]
Approved by: mlaier (mentor)
MFC after: 3 days
hooks for each outgoing interface but also run pfil hooks _N times_ on the
bridge interface. This is changed so pfil hooks are run once for the bridge
interface (bridge0) and then only on the outgoing interfaces in the broadcast
loop.
- Simplify bridge_enqueue() by moving bridge_pfil() to the callers.
- Check (inet6_pfil_hook.ph_busy_count >= 0), it may be possible to have a
packet filter hooked for only ipv6 but we were only checking if ipv4 hooks
were busy.
- Minor optimisation for null mbuf check after bridge_pfil(), move it into the
if-block as it couldnt possibly be null outside.
Prodded by: mlaier
Approved by: re (scottl), mlaier (mentor)
redundant with respect to existing mbuf copy label routines. Expose
a new mac_copy_mbuf() routine at the top end of the Framework and
use that; use the existing mpo_copy_mbuf_label() routine on the
bottom end.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, SPAWAR
Approved by: re (scottl)
packet filter. This would cause a panic on architectures that require strict
alignment such as sparc64, ia64 and ppc.
This uses the code block from if_bridge and the newly added macro
IP_HDR_ALIGNED_P().
This /might/ be a temporary messure before all NIC drivers are educated
to align the header themself.
PR: ia64/81284
Obtained from: NetBSD (if_bridge)
Approved by: re (dwhite), mlaier (mentor)
packet filter. This would cause a panic on architectures that require strict
alignment such as sparc64 (tier1) and ia64/ppc (tier2).
This adds two new macros that check the alignment, these are compile time
dependent on __NO_STRICT_ALIGNMENT which is set for i386 and amd64 where
alignment isn't need so the cost is avoided.
IP_HDR_ALIGNED_P()
IP6_HDR_ALIGNED_P()
Move bridge_ip_checkbasic()/bridge_ip6_checkbasic() up so that the alignment
is checked for ipfw and dummynet too.
PR: ia64/81284
Obtained from: NetBSD
Approved by: re (dwhite), mlaier (mentor)
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
a cosmetic change. m_uiotombuf() produces a packet header mbuf, while
original implementation did not. When kernel is compiled with MAC
support, headerless mbuf will cause panic.
Reported by: Alexander Nikiforenko <asn rambler-co.ru>
Approved by: re (scottl)
MFC After: 2 weeks
route itself.
It fixes a bug where an IPv4 route for example has an IPv6 gateway
specified:
route add 10.1.1.1 -inet6 fe80::1%fxp0
Destination Gateway Flags Refs Use Netif Expire
10.1.1.1 fe80::1%fxp0 UGHS 0 0 fxp0
The fix rejects these illegal combinations:
route: writing to routing socket: Invalid argument
add host 10.1.1.1: gateway fe80::1%fxp0: Invalid argument
Reviewed by: KAME jinmei@isl.rdc.toshiba.co.jp
Reviewed by: andre (mentor)
Approved by: re
MFC after: 5
