Unlike Illumos FreeBSD has concept of logical ashift, that specifies
really minimal vdev block size that can be accessed. This knowledge
allows properly pad physical I/O and correctly assert its alignment.
This change fixes L2ARC write errors when device has logical sector
size above 512 bytes.
MFC after: 1 month
This driver works in PIO mode for now, interrupts are available only when
FIFO is enabled. The FIFO cannot be used with arbitrary sizes which defeat
its general use.
At some point we can add DMA transfers where the FIFO can be more useful.
Tested on uBMC (microBMC) and BBB.
Sponsored by: Rubicon Communications (Netgate)
This corrects an error in r296947 in that it is not possible to assert
which thread holds a shared (or read) lock, but it is possible to assert
that one is held. Just not very useful.
MFC after: 1 week
Submitted by: wblock, jhb
Reviewed by: kib (earlier version), jhb, wblock
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5659
Import portions of the PowerPC OF PCI implementation into new file
"ofwpci.c", common for other platforms. The files ofw_pci.c and ofw_pci.h
from sys/powerpc/ofw no longer exist. All required declarations are moved
to sys/dev/ofw/ofwpci.h. This creates a new ofw_pci_write_ivar() function
and modifies some others methods. Most functions contain existing ppc
implementations in the majority unchanged. Now there is no need to have
multiple identical copies of methods for various architectures.
Requested by: jhibbits
Reviewed by: jhibbits, marius
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Differential Revision: https://reviews.freebsd.org/D4879
different ID space than the kernel. Because of this we need to read the
ID from the hardware. The hardware will provide this value to the CPU by
reading any of the first 8 Interrupt Processor Targets Registers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5706
- Do not mark CSUM_IP_CHECKED and CSUM_IP_VALID on IPv6 packets.
IPv6 does not have checksums by definition.
- Set SCTP packets csum_flags CSUM_SCTP_VALID instead of
CSUM_DATA_VALID and skip csum_data
- Set csum_data simply as 0xffff without byteswap
Pointed out by: yongari
Reviewed by: yongari, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5537
It is not necessary as entries are being manipulated under lock.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5536
and avoid a delay while waiting for IPI delivery acknowledgement in
xAPIC mode. This makes the loop exit immediately after the delivery
bit in APIC_ICR register is set, instead of waiting for some
microseconds.
We only need to ensure that some amount of time is allowed for the
LAPIC to react to the command, and we need that the wait time is
finite and reasonable. For that reasons, it is irrelevant if the CPU
frequency or throttling decrease the speed and make the loop,
calibrated for full CPU speed at boot time, execute somewhat slower.
Discussed with: bde, jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
This adds Samsung PM851 to the list. It can be found in Lenovo Thinkpad
T440 for instance.
Reviewed by: Kevin Bowling <kevin.bowling@kev009.com>,
Jason Wolfe <j@nitrology.com>
Approved by: Kevin Bowling <kevin.bowling@kev009.com>,
Jason Wolfe <j@nitrology.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5753
requests if cb->state is not IDLE.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
Sponsored by: Chelsio Communications
This is a no-op currently, but in kernels with earlier AP startup, the
random kthread was trying to use timeouts with sleeps before timers are
working. Wait until SI_SUB_KICK_SCHEDULER to start the random kproc.
Reviewed by: delphij, imp, markm
Approved by: so
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D5712
In r296926 the -P <path> option was added to kbdcontrol, which enables
this change for a simplified compile-time default keymap build process.
PR: 193865
Reviewed by: Oliver Pinter
Tested by: Oliver Pinter
MFC After: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5708
Use 'pdpe' to extract the PA of the 1GB page instead of 'pde' (which was
a copy and paste bug from the 2MB page case further down).
CID: 1341467
Reported by: pfg
sounds like some kind of horrific theme park. "Hey kids, want to go to
User Land?" "No! We'll be good!"
The obvious replacement is "userland", a compound word replete with
term-of-art meaning and just a hint of cautionary tale. The alternate
terms "flugelhorn" and "bullfrog", while also good, are less well-known
and were voted down in committee.
MFC after: 1 week
deadline mode the divide configuration is not used and
lapic_timer_divisor is not set.
Reported by: dhw, mav
Tested by: mav
Sponsored by: The FreeBSD Foundation
LAPIC timer iinterrupt when TSC reaches the value written to the
IA32_TSC_DEADLINE MSR. To arm or reset the timer in deadline mode, a
single non-serializing MSR write is enough. This is an advance from
the one-shot mode of LAPIC, where timer operated with the FSB
frequency and required two (serialized in case of xAPIC) writes to the
APIC registers.
The LVT_TIMER register value is cached to avoid unneeded writes in the
deadline mode. Unused arguments to specify period (which is passed in
struct lapic as la_timer_period) and interrupt enable (which is always
enabled) are removed from lapic_timer_{oneshot,periodic,deadline}
functions. Instead, special lapic_timer_oneshot_nointr() function for
interrupt-less one-shot calibration is added.
Reviewed by: mav (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5738
The graphic mode is noticeably slow on hypervisors, especially
on Hyper-V (1 second to each line).
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: kib, sephe, royger (early loader version)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5739
program without listening to the devd socket for all events. Define
two new pseudo variables $*, the entire event from devctl and $_,
the entire event without the type character, since it might be easier
to use in some circumstances.
only the first one will actually work and all the others just result in
errors (which would get printed but otherwise ignored).
Instead, wait until we make a choice of which interface will be used to
mount the rootfs, and install the default route associated with it (if any).
After doing the md_mount() call to obtain the needed info, remove the
default route again, and transcribe the route info into the nfs_diskless
structure. If the system eventually chooses to mount the nfs rootfs, the
default route will be installed again when the nfs_diskless code
re-initializes the interface.
The theory here is that since we can only have one default route, the one
most likely to be correct for mounting the rootfs is the one that was
delivered along with the rootpath option.
bootp/dhcp server doesn't provide a router option. Doing so prevents
setting defaultrouter=<ip> in rc.conf (it fails because there's already
a bogus default route installed by bootpc_init).
When an admin wants to use this style of proxy arp on an interface, the
proper mechanism is to set the "use-lease-addr-for-default-route" flag
in the dhcp server config. That causes the lease address to be delivered
in the routers option, and the normal handling of the routers option will
then install the self-ip as the default route.
PR: 187094
doesn't check for errors, and all the errors that can happen result in it
calling panic anyway, except for one that's really more of a warning (and
is going to disappear on an upcoming commit anyway).
server (and not when it came from a fallback method such as the ROOTDEVNAME
option). This makes the code in bootpc_init() choose the first interface
that provided a rootpath name. Previously it was choosing the first
interface that got an IP address, which could be on a different and
potentially unreachable subnet than the server providing the rootfs.
If the rootpath name actually does come from a fallback source, then the
code continues to use the first interface in the list that got configured.
Note that this wasn't directly reported in the PR cited below, but was
discovered while working on that PR.
PR: 187094
[libcxx] Enable noexcept for GCC 4.6 and greater
Summary:
This patch allows GCC 4.6 and above to use `noexcept` as opposed to
`throw()`.
Is it an ABI safe change to suddenly switch on `noexcept`? I imagine
it must be because it's disabled in w/ clang in C++03 but not C++11.
Reviewers: danalbert, jroelofs, mclow.lists
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D15516
This should fix errors from gcc 4.6 and higher when compiling llvm-cov
and/or other llvm tools.
Reported by: bdrewery
In the case the width is less than 0, we are returning an uninitialized
value. For practical purposes the return value is ignored but initialize
it to avoid trouble.
CID: 1341619
