Commit Graph

37 Commits

Author SHA1 Message Date
Poul-Henning Kamp
8f18989721 Include <sys/ioccom.h> instead of <sys/disklabel.h> 2003-04-16 20:46:30 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
David E. O'Brien
e901be8e96 <machine/vmparam.h> is the right place to get KERNBASE, so don't special
platform case it (or use alternate spellings).
2003-02-24 06:56:18 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Robert Watson
5083ed18af Use UID_ and GID_ constants instead of hard-coded numeric values
with make_dev().  Use OPERATOR instead of implicit WHEEL to match
other storage devices.  Use a mode of 0640 to be consistent
with other storage devices.

Submitted by:	kris
Reviewed by:	scottl
2002-12-27 17:50:39 +00:00
John Baldwin
ba76c5a2c1 Use a bandaid to fix a warning. However, this driver is very, very far
from being MI in any fashion.  It currently "assumes" that it can get
a kernel virtual address for a phyiscal address by adding KERNBASE to the
physical address.  It also tries to read values out of a the PC BIOS on
all archs.  It also uses "manual" inb() and outb()'s to talk to the mcclock
device which just happens to be at that location on both i386 and alpha.
This driver should likely be i386-only.
2002-11-06 19:42:59 +00:00
Archie Cobbs
4a6a94d8d8 Replace (ab)uses of "NULL" where "0" is really meant. 2002-08-22 21:24:01 +00:00
Brian Somers
2f371b0268 Remove an extraneous )
Not approved by: maintainer

I'm guessing that this is trivial enough to sidestep approval.
2002-05-15 12:25:11 +00:00
David E. O'Brien
d93389d676 `unexpand -a' should be run _before_ sed 's/^#define /#define^I/g'. 2002-05-14 21:59:10 +00:00
David E. O'Brien
5d340b7ec1 Tighten up the defined()'s. 2002-05-14 21:54:56 +00:00
David E. O'Brien
014585d125 unexpand -a everything 2002-05-14 01:09:03 +00:00
David E. O'Brien
ddd36f9fac First pass of style(9) for #define's. 2002-05-14 00:53:08 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Alfred Perlstein
5da99a94e8 Remove erronious destroy_dev. Not sure what the author's intent was here
but this makes the driver not panic my -current box.

Approved by: scottl
2002-04-01 06:09:17 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
47f9536259 If we're going to ifdef out the only reference to asr_drvinit, then
go ahead and ifdef out the function too.
2002-02-26 03:22:44 +00:00
David E. O'Brien
f414f5dc5c Convert C++ style comments to proper C ones.
Clean up C comments just a tad.
Fix ID's.
2001-12-13 23:48:34 +00:00
John Baldwin
7118b0c4c3 Use C comments instead of C++ comments.
Reported by:	gcc30
2001-12-13 19:54:12 +00:00
Scott Long
ed4927f5e8 Put a Band-Aid over the asr driver so that it hopefully won't cause
panics until the author comes up with a real fix.
2001-10-30 21:13:39 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Scott Long
2c325c113c Fresh code drop from the vendor. This fixes some critical bugs and adds
support for a new class of controllers.  Also adjust MAINTAINER at the
approval of msmith.

Obtained from:	mark_salyzyn@adaptec.com
2001-08-21 19:58:16 +00:00
Paul Saab
05ba6e6a36 Fix probing on the alpha. It still causes the alpha to panic during
attach.
2001-04-03 00:26:34 +00:00
Scott Long
0001afe2f5 Make an attempt to get the asr driver to compile on Alpha by fixing some i386
specific bogons.  Compile with -O0, as anything higher gives the compiler
a fit.  No idea if this driver will actually work on Alpha, though.
2001-04-01 08:33:01 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Kris Kennaway
dd76c70387 Typo fixes: prefered -> preferred
There are some others in contributed/external code I haven't touched.
2001-02-20 10:30:22 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
David Malone
087e2cb75a Use M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	mark_salyzyn@adaptec.com
2000-12-03 13:21:55 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Mike Smith
e3c457130c Fix a race in ASR_ccbAdd and ASR_ccbRemove, which were both manipulating
the ccb queue without masking interrupts.

Submitted by:	Petr Lampa <lampa@fee.vutbr.cz>
2000-09-21 20:21:30 +00:00
Mike Smith
0f4c21ddfc Move the 'asr' driver to cdev major 154, since 97 is already taken. 2000-09-01 21:14:17 +00:00
Mike Smith
f25c4efcd0 Add MAINTAINER tag to aid updaters in finding the responsible parties. 2000-09-01 07:53:04 +00:00
Mike Smith
ef137fd32f Add the 'asr' driver, supplied by Mark Salyzyn of Adaptec (nee DPT).
This provides support for the Adaptec SCSI RAID controller family,
as well as the DPT SmartRAID V and VI families.

The driver will be maintained by Mark and Adaptec, and any changes
should be referred to the MAINTAINER.
2000-09-01 07:51:25 +00:00