Commit Graph

72 Commits

Author SHA1 Message Date
Conrad Meyer
b6c7d9c345 devstat(9): Constify function parameters that can be const
No functional change.

When attempting to document the changed argument types in devstat.9, I
discovered the 20 year old manual page severely mismatched reality even
prior to my simple change.  So I took a first cut pass cleaning that up to
match reality.  I'm sure I've missed some things; the goal was just to leave
it better than when I started.

Sponsored by:	Dell EMC Isilon
2018-08-23 01:42:45 +00:00
Pedro F. Giffuni
8a36da99de sys/kern: adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:20:12 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Pedro F. Giffuni
e3043798aa sys/kern: spelling fixes in comments.
No functional change.
2016-04-29 22:15:33 +00:00
Hans Petter Selasky
f0188618f2 Fix multiple incorrect SYSCTL arguments in the kernel:
- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-21 07:31:21 +00:00
Maksim Yevmenkin
b646225a13 change defaule permissions on /dev/devstat. while i'm here remove
D_NEEDGIANT flag

Submitted by:	jhb
Reviewed by:	jhb, scottl, rwatson, delphij, phk
MFC after:	1 week
2014-03-24 18:13:41 +00:00
Andriy Gapon
d9fae5ab88 dtrace sdt: remove the ugly sname parameter of SDT_PROBE_DEFINE
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).

Reviewed by:	markj
MFC after:	3 weeks
2013-11-26 08:46:27 +00:00
Attilio Rao
54366c0bd7 - For kernel compiled only with KDTRACE_HOOKS and not any lock debugging
option, unbreak the lock tracing release semantic by embedding
  calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
  version of the releasing functions for mutex, rwlock and sxlock.
  Failing to do so skips the lockstat_probe_func invokation for
  unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
  kernel compiled without lock debugging options, potentially every
  consumer must be compiled including opt_kdtrace.h.
  Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
  dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
  is linked there and it is only used as a compile-time stub [0].

[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested.  As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while.  Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].

Sponsored by:	EMC / Isilon storage division
Discussed with:	rstone
[0] Reported by:	rstone
[1] Discussed with:	philip
2013-11-25 07:38:45 +00:00
Mark Johnston
2e1ae0b3e9 Redefine the io provider using the SDT(9) macros instead of doing everything
manually. This change has no functional impact.

Discussed with:	gnn
2013-10-24 02:39:07 +00:00
Alexander Motin
40ea77a036 Merge GEOM direct dispatch changes from the projects/camlock branch.
When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.

The defined now safety requirements are:
 - caller should not hold any locks and should be reenterable;
 - callee should not depend on GEOM dual-threaded concurency semantics;
 - on the way down, if request is unmapped while callee doesn't support it,
   the context should be sleepable;
 - kernel thread stack usage should be below 50%.

To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
 - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
 - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
 - G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
 - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe.  If any of requirements are not met, request is queued to
g_up or g_down thread same as before.

Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).

To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION.  da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.

This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).

Sponsored by:	iXsystems, Inc.
MFC after:	2 months
2013-10-22 08:22:19 +00:00
Alexander Motin
e431d66c04 MFprojects/camlock r254905:
Introduce new function devstat_end_transaction_bio_bt(), adding new argument
to specify present time.  Use this function to move binuptime() out of lock,
substantially reducing lock congestion when slow timecounter is used.
2013-10-16 09:12:40 +00:00
Konstantin Belousov
92a9c65b06 Fix build for kernels with dtrace hooks.
MFC after:	1 month
2012-07-11 18:50:50 +00:00
George V. Neville-Neil
3fac94ba94 Initial commit of an I/O provider for DTrace on FreeBSD.
These probes are most useful when looking into the structures
they provide, which are listed in io.d.  For example:

dtrace -n 'io:genunix::start { printf("%d\n", args[0]->bio_bcount); }'

Note that the I/O systems in FreeBSD and Solaris/Illumos are sufficiently
different that there is not a 1:1 mapping from scripts that work
with one to the other.
MFC after:	1 month
2012-07-11 16:27:02 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Kenneth D. Merry
094efe753d Instead of using an atomic operation to determine whether the devstat(9)
device node has been created, pass MAKEDEV_CHECKNAME in so that the devfs
code will do the check.

Use a regular static variable as before, that's good enough to keep us from
calling into devfs most of the time.

Suggested by:	kib
MFC after:	1 week
Sponsored by:	Spectra Logic Corporation
2011-06-13 22:08:24 +00:00
Justin T. Gibbs
27c959cf05 Fix a couple of race conditions in devstat(9) initialization.
In devstat_new_entry(), there is no need to initialize the queue
and the mutex in this function.  There are ways to do static
initialization on both, so use STAILQ_HEAD_INITIALIZER and
MTX_SYSINIT to initialize the queue and the mutex.

In devstat_alloc(), use an atomic test and set routine to guard
making our entry in /dev.  Using just a plain static variable
creates a race condition on multiprocessor machines.  If you
attempt to create a second entry in devfs, the kernel will panic.

Submitted by:	kdm
Reviewed by:	gibbs
Sponsored by:	Spectra Logic Corporation
MFC after:	1 week.
2011-06-13 21:21:02 +00:00
Konstantin Belousov
23b70c1ae2 Finish r210923, 210926. Mark some devices as eternal.
MFC after:	2 weeks
2011-01-04 10:59:38 +00:00
Ed Schouten
60ae52f785 Use ISO C99 integer types in sys/kern where possible.
There are only about 100 occurences of the BSD-specific u_int*_t
datatypes in sys/kern. The ISO C99 integer types are used here more
often.
2010-06-21 09:55:56 +00:00
Robert Noland
cfd7bacef2 Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by:	jhb@
MFC after:	Not in this lifetime...
2009-12-29 21:51:28 +00:00
Attilio Rao
39df6da8cc Don't allocate new unnecessary pages when devstat_alloc() looses the
run for re-acuiring the lock, but recheck if new pages are allocatable
from the pool and free the previously allocated ones.

Tested by:	pho, Giovanni Trematerra
		<giovanni dot trematerra at gmail dot com>
2009-09-18 13:48:38 +00:00
Warner Losh
2c204a1631 Use NULL in preference to 0 in pointer contexts. 2009-02-03 07:54:42 +00:00
Jeff Roberson
279d4d3761 - Remove two mtx_asserts that can incorrectly trigger if
devstat_end_transaction is called from a fast interrupt.  Presently
   there is no way for mtx_assert to determine that we're not executing
   in a real thread context.

Submitted by:	jhusted@isilon.com
2005-05-03 10:58:05 +00:00
Warner Losh
9454b2d864 /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 23:35:40 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
70cd771337 The present defaults for the open and close for device drivers which
provide no methods does not make any sense, and is not used by any
driver.

It is a pretty hard to come up with even a theoretical concept of
a device driver which would always fail open and close with ENODEV.

Change the defaults to be nullopen() and nullclose() which simply
does nothing.

Remove explicit initializations to these from the drivers which
already used them.
2003-09-27 12:01:01 +00:00
Poul-Henning Kamp
037c3d0fb0 It is not an error to have no devices in the kernel: Return the
generation number and start it from one instead of zero.
2003-08-17 12:06:19 +00:00
David E. O'Brien
677b542ea2 Use __FBSDID(). 2003-06-11 00:56:59 +00:00
Hartmut Brandt
6e17a0d754 Unbreak vinum, iostat and systat on sparc64 by changing the devstat
generation number back to a long (sizeof(u_int) != sizeof(long) on
sparc64). The alternative would have been to heavily change the libdevstat API.

Discussed with: phk, ken
2003-04-17 15:06:28 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Jake Burkholder
84513ca201 long != int. Use SYSCTL_UINT for kern.devstat.generation. Fixes booting
on sparc64.
2003-03-18 23:32:27 +00:00
Poul-Henning Kamp
c967bee755 If devstat_new_entry() is passed a unit number of -1 assume that
the devstat is for an "interior" GEOM node and register using the
name argument as a geom identity pointer.  Do not put these devstat
structures on the list returned by the sysctl.

This gives us the ability to tell the two kinds of nodes apart and
leave the current "strictly physical" view of devstat intact without
modifications, yet be able to use devstat for both kinds of devices.

It also saves us bloating struct devstat with another 48 bytes of
space for the name.  At least for now.

Reviewed by:    ken
2003-03-18 09:30:31 +00:00
Poul-Henning Kamp
224d5539a9 Make devstat fully Giant agnostic:
Add a mutex and protect the allocation and traversal of the list with it.

When we allocate a page for devstat use we drop the mutex and use
M_WAITOK this is not nice, but under the given circumstances the
best we can do.

In the sysctl handler for returning the devstat entries we do not want to
hold the mutex across copyout(9) calls, so we keep a very careful eye on
the devstat_generation count, and abandon with EBUSY if it changes under
our feet.

Specifically test for BIO_WRITE, rather than default non-read,non-deletes
as write.  Make the default be DEVSTAT_NO_DATA.

Add atomic increments of the sequence[01] fields so applications using the
mmap'ed view stand a chance of detecting updates in progress.

Reviewed by:    ken
2003-03-18 09:20:20 +00:00
Poul-Henning Kamp
538aabaad9 Make devstat_new_entry() take a const void * rather than const char *
argument, GEOM nodes are not identified by ascii string.
2003-03-18 07:52:59 +00:00
Poul-Henning Kamp
5fa5746d3d Add a #define for the device name of the mmap device for devstat.
Constify the geom identification pointer.
2003-03-16 23:20:05 +00:00
Poul-Henning Kamp
d15cd51001 One devstat_start_transaction_bio() is enough. 2003-03-15 22:20:38 +00:00
Poul-Henning Kamp
7194d335cf Run a revision of the devstat interface:
Kernel:

Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale.  This makes the
device statistics code oblivious to clock steps.

Change timestamps to bintime format, they are cheaper.

Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively.  This removes the locking constraint on
devstat.

Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.

Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).

Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path.  In the up path we accumulate the timeslice in busy_time
and update busy_from.

Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].

Userland:

Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.

Change devstat_compute_etime() to operate on struct bintime.

Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.

Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.

Bump __FreeBSD_version to 500107

Review & Collaboration by:	ken
2003-03-15 21:59:06 +00:00
Poul-Henning Kamp
9fa85de269 Add a devstat_start_transaction_bio() to match the
devstat_end_transaction_bio() we already have.

For now it just calls devstat_start_transaction(), but that will change
shortly.
2003-03-15 10:33:32 +00:00
Poul-Henning Kamp
d42ee4e410 Note that MAJOR_AUTO is now the default if d_maj is not initialized. This
is more robust and prevents the hijacking of /dev/console for the typical
mistake.

Remove unneeded MAJOR_AUTO uses, it is only needed explicitly now if the
driver source has cross-branch compatibility to old releases.
2003-03-09 11:03:45 +00:00
Poul-Henning Kamp
f37de12275 Retire devstat_add_entry() as a public function and bump __FreeBSD_version
to mark this act.
2003-03-08 21:46:43 +00:00
Poul-Henning Kamp
c7e73d59c4 Introduce a device driver for /dev/devstat, this will allow us to mmap
the device statistics structures into userland instead of using sysctl.

Introduce new devstat_new_entry() function which allocates the devstat
structure an calls devstat_add_entry() on it.
2003-03-08 19:58:57 +00:00
Robert Drehmel
e80fb43467 Use strlcpy() instead of strncpy() to copy NUL terminated strings
for safety and consistency.
2002-10-17 20:03:38 +00:00
Poul-Henning Kamp
57c10583aa GC: BIO_ORDERED, various infrastructure dealing with BIO_ORDERED. 2002-02-22 09:26:35 +00:00
Thomas Moestl
938a4e5c0c Export the head structure for the device statistics STAILQ in
sys/devicestat.h, so that the queue can be walked in crashdumps using
libkvm.
2001-08-04 18:02:47 +00:00
Poul-Henning Kamp
37d4006626 Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
John Baldwin
9701cd40b4 Support for unsigned integer and long sysctl variables. Update the
SYSCTL_LONG macro to be consistent with other integer sysctl variables
and require an initial value instead of assuming 0.  Update several
sysctl variables to use the unsigned types.

PR:		15251
Submitted by:	Kelly Yancey <kbyanc@posi.net>
2000-07-05 07:46:41 +00:00
Poul-Henning Kamp
77978ab8bc Previous commit changing SYSCTL_HANDLER_ARGS violated KNF.
Pointed out by:	bde
2000-07-04 11:25:35 +00:00
Poul-Henning Kamp
82d9ae4e32 Style police catches up with rev 1.26 of src/sys/sys/sysctl.h:
Sanitize SYSCTL_HANDLER_ARGS so that simplistic tools can grog our
sources:

        -sysctl_vm_zone SYSCTL_HANDLER_ARGS
        +sysctl_vm_zone (SYSCTL_HANDLER_ARGS)
2000-07-03 09:35:31 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00