sockstat can "hang" on getpwuid() calls in situations when FreeBSD
is joined to a directory service (AD/LDAP etc) and the directory
service fail to answer in a timely manner when trying to resolve
numeric UIDs to user names.
Submitted by: Caleb St. John <caleb@ixsystems.com>
MFC after: 1 week
Add two simple examples. In this case I opted to show a small portion of
the output since it helps to understand what the tool does. It shows the use
of the -t flag too.
PR:
Submitted by:
Reported by:
Reviewed by: gbe@
Approved by: manpages (bcr@)
Obtained from:
MFC after:
MFH:
Relnotes:
Security:
Sponsored by:
Differential Revision: https://reviews.freebsd.org/D27543
FreeBSD has used ELF binaries/libraries for decades, but still has some
support for legacy a.out binaries. Portions of this have been retired
over time, but support remained in ldd, ldconfig, and gprof.
Retire gprof support; if anyone needs to do development on a.out
binaries still they will be best served by installing a full FreeBSD 2.x
or other obsolete version in a jail.
Kernel support for executing a.out binaries is unchnaged.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27480
Unconditionally install bsdgrep as grep, bootstrap or not. Remove all
build glue and stop installing both gnugrep and libgnuregex now that
all consumers of the latter are gone.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27732
When exporting a variable we correctly check all the preconditions that
could make setenv(3) fail. Checking the setenv(3) return value seems
redundant, but given that login(1) is critical, it doesn't hurt to have
a post-check.
This change is based on the "Principles of Secure Coding" course by
Matthew Bishop, PhD., which specifically discusses this code in FreeBSD.
(This change redoes r368776 due to a silly mistake)
When exporting a variable we correctly check all the preconditions that
could make setenv(3) fail. Checking the setenv(3) return value seems
redundant, but given that login(1) is critical, it doesn't hurt to have
a post-check.
This change is based on the "Principles of Secure Coding" course by
Matthew Bishop, PhD., which specifically discusses this code in FreeBSD.
Differential Revision: https://reviews.freebsd.org/D26966
Also centralize and unify checks to enable ASLR stack gap in a new
helper exec_stackgap().
PR: 239873
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Move the include of langinfo.h out of the WITH_ICONV condition block,
since it is not dependent on ICONV. This was correct when nl_langinfo()
had only been called in the WITH_ICONV case, but that is no longer the
case.
Submitted by: yuripv
There was an unprotected use of nl_langinfo() to determine the order of
day vs. month in the generated output.
When building without ICONV support, the order will be: month, day.
yesexpr is an extended regular expression for quite some time now,
use appropriate flag when compiling it.
PR: 238762
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D27509
Add simple example showing the use of the flags: p, t, v
Reviewed by: gbe@, yuripv@
Approved by: manpages (yuripv@)
Differential Revision: https://reviews.freebsd.org/D27541
These values are taken directly from the density report from an
IBM LTO-9 tape drive. (Using mt getdensity)
A LTO-9 drive stores 18TB raw (45TB with compression) on an LTO-9 tape.
lib/libmt/mtlib.c:
Add the LTO-9 density code, and bpmm/bpi values.
usr.bin/mt/mt.1:
Add the LTO-9 density code, bpmm/bpi values and number of
tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
Add some examples covering the flags: G, n, P, p, u
Add reference to groups(1)
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27539
We know up front how many items we can have in the queue (-B/Bflag), so
pay the cost of those particular allocations early on.
The reduced queue maintenance overhead seemed to yield about an ~8%
improvement for my earlier `grep -C8 -r closefrom .` test.
MFC after: 2 weeks
In both cases, print the flag bits first followed by the command.
Output now looks something like this:
(ktrace)
_umtx_op(0x8605f7008,0xf<UMTX_OP_WAIT_UINT_PRIVATE>,0,0,0)
_umtx_op(0x9fffdce8,0x80000003<UMTX_OP__32BIT|UMTX_OP_WAKE>,0x1,0,0)
(truss)
_umtx_op(0x7fffffffda50,UMTX_OP_WAKE,0x1,0x0,0x0) = 0 (0x0)
_umtx_op(0x9fffdd08,UMTX_OP__32BIT|UMTX_OP_WAKE,0x1,0x0,0x0) = 0 (0x0)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27325
This is addressing cases such as fts_read(3) encountering an [EIO]
from fchdir(2) when FTS_NOCHDIR is not set. That would otherwise be
seen as a successful traversal in some of these cases while silently
discarding expected work.
As noted in r264201, fts_read() does not set errno to 0 on a successful
EOF so it needs to be set before calling it. Otherwise we might see
a random error from one of the iterations.
gzip is ignoring most errors and could be improved separately.
Reviewed by: vangyzen
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27184
r368355 removed the GNU_GREP_COMPAT knob (off by default) and forgot that
bsdgrep may be built/used for bootstrap on some systems.
All base uses should strive to use only POSIX-compliant expressions anyways
and we haven't had libregex by default here up to this point, so just don't
do that if we're bootstrapping.
Note that the resulting binary has the wrong `grep -V` information as it
falsely claims to be GNU compatible, but it is only for bootstrap.
Reported by: GitHub cross-builds via yuripv
This was introduced and then disabled by default primarily to avoid dealing
with bugs in libgnuregex. rS363823 switched to using libregex for it, so
let's just rip the option out now so we can make sure we're getting tested
with libregex via bsdgrep.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27476
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
The contents of lib.c, lib2.c, bc_help.c, and dc_help.c depends on the
parameters passed to strgen.sh in this Makefile. A change to the number
of parameters of strgen.sh has been applied to the invocation of this
command, but this did not cause a rebuild of the generated files.
Reported by: Cy.Schubert@cschubert.com
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o More code cleanup and refactoring.
o More unit tests
MFC after: 1 week