Commit Graph

26 Commits

Author SHA1 Message Date
Warner Losh
c8e00ff96e Use .MAKE.LEVEL being defined as a bootstrap aid when providing
fallback targets to build the aic generated files. fmake doesn't like
the current construct, and since it doesn't have .MAKE.LEVEL, just
don't provide the fallback targets for fmake. This gives a little
extra compatibility to old systems trying to build new kernels at
almost no cost to the current code.
2015-01-10 23:43:39 +00:00
Warner Losh
4906cdc8c5 Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support
CWARNFALGS.$file centrally so we don't have to have it in all the
places. Remove a few warning flags that are no longer needed.
Also, always use -Wno-unknown-pragma to (hopefully temporarily) work
around #pragma ident in debug.h in the opensolaris code. Remove some
stale warning suppression that's no longer necessary.
2015-01-03 03:35:18 +00:00
Ian Lepore
1fd407a76c This module requires pci_if.h, add it to the SRCS list.
We haven't noticed that it was missing because eisa has been disabled for
a while in -current, but it became apparent when some parallel-build stuff
was MFC'd to 10-stable and this module failed to build there.
2014-08-21 22:42:02 +00:00
Warner Losh
df3394b3de Remove dependence on source tree options. Move all kernel module
options into kern.opts.mk and change all the places where we use
src.opts.mk to pull in the options. Conditionally define SYSDIR and
use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all
instances of CURDIR/../../etc with STSDIR, but only in the affected
files.

As a special compatibility hack, include bsd.owm.mk at the top of
kern.opts.mk to allow the bare build of sys/modules to work on older
systems. If the defaults ever change between 9.x, 10.x and current for
these options, however, you'll wind up with the host OS' defaults
rather than the -current defaults. This hack will be removed when
we no longer need to support this build scenario.

Reviewed by: jhb
Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
John Baldwin
d0345bb310 Re-enable -Werror for these modules. It is already enabled for the same
files when built as part of a kernel.
2014-06-09 20:48:38 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Warner Losh
77667fecbe Don't build EISA by default anymore. Remove from i386 GENERIC and
create an option that defaults to "no" on all platforms to not build
the EISA bits.

Discussed on: arch@
2014-04-18 16:53:06 +00:00
Scott Long
50b464aa1a Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed.  The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm.  If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.

This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
2014-01-07 19:33:17 +00:00
Ian Lepore
f827d58e4d Rework the aicasm build machinery so that it gets built along with toolchain
components instead of with the kernel and/or modules.  This ensures that it
gets built with the host compiler, not the compiler in obj/... used to build
the target components (which may be a cross-compiler outputting code for a
different architecture and using header files with types and options set up
for the wrong architecture).

Reviewed by:	imp
2013-11-04 15:55:04 +00:00
Dimitry Andric
40c56173c2 Disable -Wconstant-conversion warnings for the aic7xxx module in a more
fine-grained way: only add the option for the specific .c files that
need them, like via sys/conf/files.

MFC after:	1 week
2011-12-22 16:16:12 +00:00
Dimitry Andric
ff0dd2e517 Amend r228779 by also disabling -Wconstant-conversion warnings for the
aic7xxx module.

MFC after:	1 week
2011-12-21 20:23:03 +00:00
Warner Losh
2879ce1de3 Add WERRROR= to work around the warnings 2005-01-26 16:29:07 +00:00
Nate Lawson
6e19953485 Back out previous commits. Installing new share/mk fixes this. 2005-01-03 07:27:17 +00:00
Nate Lawson
e87e3960b6 NO_MAN is now NOMAN. 2005-01-03 05:36:55 +00:00
Nate Lawson
182234f916 Fix kernel modules build. For some reason, this module now bails out with
an error that there is no aicasm.1 man page.
2005-01-03 05:35:58 +00:00
Ruslan Ermilov
201cef5702 Curlies only work in target and sources specifications, but
not when passed to Bourne shell.  This unbreaks "make clean".
2004-10-24 07:54:44 +00:00
Justin T. Gibbs
d3f39a7438 Add ISA attachement files for the aic7xxx driver.
Approved by: re
Reminded by: obrien
2004-08-17 02:32:30 +00:00
Justin T. Gibbs
7afc02188a Add an ISA attachement to the aic7xxx driver to handle 284X controllers.
The ISA probe uses an identify routine to probe all slot locations from
1 to 14 that do not conflict with other allocated resources.  This required
making aic7770.c part of the driver core when compiled as a module.

aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
	Use aic_scb_timer_start() consistently to start the watchdog timer.
	This removes a few places that verbatum copied the code in
	aic_scb_timer_start().

	During recovery processing, allow commands to still be queued to
	the controller.  The only requirement we have is that our recovery
	command be queued first - something the code already guaranteed.
	The only other change required to make this work is to prevent
	timers from being started for these newly queued commands.

Approved by: re
2004-08-17 00:14:31 +00:00
Warner Losh
a7ac8cb9c9 Add eisa_if.h to the list of things to build for new eisa_if.m for the
case where we build modules with world.
2004-06-09 21:51:02 +00:00
Justin T. Gibbs
295ebaf851 Update GENSRCS and aicasm options correctly depending on whether register
pretty printing is enabled

Add a dependency on the source files for aicasm so that it will be rebuilt
if out of date.

Simplify.
2003-01-22 21:56:54 +00:00
Yoshihiro Takahashi
c7a1bf8bf3 Include "../Makefile.inc". 2002-11-06 13:41:40 +00:00
Scott Long
fb404d6fcf Hook the aic7xxx modules up. This requires some extra care since aicasm
is a compiler tool and needs to be compiled by the host compiler.  I've
tested this in i386->sparc cross-build, 4.7->current upgrade, normal
buildkernel target, and normal /sys/i386/compile/GENERIC configurations.

Submitted by:	ru
2002-11-03 23:48:14 +00:00
Justin T. Gibbs
7881765df4 Add cleandepend target. 2002-08-31 17:15:43 +00:00
Justin T. Gibbs
e340544a9a Pass the cleandir target on to the aicasm Makefile. This should
fix the buildkernel target.
2002-08-31 14:50:46 +00:00
Justin T. Gibbs
02b8bc8062 Complete the hookup of ahd/ahc module building. 2002-08-31 06:57:50 +00:00
Scott Long
0d74300cae Allow the ahc and ahd drivers to be built as modules. This also
breaks the ahc driver into a core back-end and pci and eisa
front-ends.
2002-08-01 01:36:39 +00:00